China Mechanical Engineering ›› 2013, Vol. 24 ›› Issue (19): 2588-2596.
Previous Articles Next Articles
Zhou Huicheng;Xu Yingpeng;Wu Jichun;Song Lizhi
Online:
Published:
Supported by:
周会成;徐英鹏;吴继春;宋立志
基金资助:
Abstract:
A method which was based on quadratic curve to control backing pressure was supplied. It is proved that this method can realize the control requirements in electrical injection molding machine. Experiments completed under the condition of several different setting backing pressures show the effectiveness of the approach. It indicates that the method can satisfy the control requirements of one stage or multistage backing pressure effectively.
Key words: electrical injection molding machine, backing pressure, quadratic curve;metering
摘要:
提出了一种根据经验并基于二次曲线的螺杆后退速度控制方法,基于该方法实现了全电动注塑机计量过程中背压的控制。通过实验观察了在不同设定背压值下的实际控制效果,验证了算法的有效性。实验表明,所提出的方法能够很好地完成单级以及多级背压控制工艺要求。
关键词: 全电动注塑机, 背压, 二次曲线, 塑化
CLC Number:
TQ320.5
Zhou Huicheng;Xu Yingpeng;Wu Jichun;Song Lizhi. A Backing Pressure Control Method for Electrical Injection Molding Machine Based on Quadratic Curve[J]. China Mechanical Engineering, 2013, 24(19): 2588-2596.
周会成;徐英鹏;吴继春;宋立志. 一种基于二次曲线的全电动注塑机背压控制方法[J]. 中国机械工程, 2013, 24(19): 2588-2596.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.cmemo.org.cn/EN/
http://www.cmemo.org.cn/EN/Y2013/V24/I19/2588