Robust Controller of Hydraulic Robot Joint Based on Quantitative Feedback Theory

Abstract

Abstract:

Single joint performance of hydraulic robot directly affected the overall performance of the robot control. The uncertainty and time-varying of hydraulic system parameters decreased the control precision and response speed of single joint, which requested the single joint controller had robustness. A mathematic model of servo valve controlling swaying hydraulic cylinder was established and the system parameter uncertainty was analyzed. Based on quantitative feedback theory(QFT), a single joint robust controller was designed. Simulation shows that the controller has strong robustness against the slope interference and sine interference. Experimental results verify the correctness of the robust controller.

Key words: hydraulic, robot, robustness, quantitative feedback

摘要：

液压机器人单关节性能直接影响机器人整体控制性能，液压系统参数的不确定性和时变性降低了机器人单关节控制精度和响应速度，因此要求机器人单关节控制器具有鲁棒性。建立了伺服阀控制摆动液压缸数学模型，分析了系统参数的不确定性，应用定量反馈理论 (QFT)设计了单关节鲁棒控制器。仿真表明，该控制器对斜坡干扰和正弦干扰都具有较强的鲁棒性，实验验证了控制算法的正确性。

关键词: 液压, 机器人, 鲁棒性, 定量反馈

CLC Number:

TP273

WANG Yan-1, QIN Yu-Fu-1, GUO Sheng-Rong-2. Robust Controller of Hydraulic Robot Joint Based on Quantitative Feedback Theory[J]. China Mechanical Engineering, 2013, 24(13): 1724-1727.

王岩1, 秦玉福1, 郭生荣2. 基于定量反馈理论的液压机器人单关节鲁棒控制器[J]. 中国机械工程, 2013, 24(13): 1724-1727.

References

[1]Mohanty A, Yao Bin. Indirect Adaptive Robust Control of Hydraulic Manipulators with Accurate Parameter Estimates[J]. IEEE Transactions on Control Systems Technology, 2011, 19(3)：567-575.
[2]Guan Cheng, Pan Shuangxia. Nonlinear Adaptive Robust Control of Single-rod Electro-hydraulic Actuator with Unknown Nonlinear Parameters[J]. IEEE Transactions on Control Systems Technology, 2008, 16(3)：434-445.
[3]Mohanty A, Yao Bin. Integrated Direct/Indirect Adaptive Robust Control of Hydraulic Manipulators with Valve Deadband[J].IEEE/ASME Transactions on Mechatronics,2011,16(4)：707-715.
[4]张晓东，姚小兰，伍清河. 热连轧液压厚度控制系统的H∞鲁棒预测控制[J]. 控制工程，2011，18(2)：194-197.
Zhang Xiaodong, Yao Xiaolan, Wu Qinghe. Robust H∞ Predictive Control for HAGC in Hot Strip Rolling[J]. Control Engineering of China, 2011，18(2)：194-197.
[5]肖永利，张琛，李振波，等．水下潜器的鲁棒控制系统设计[J]．上海交通大学学报，1999，33(11): 1348-1351.
Xiao Yongli, Zhang Chen, Li Zhenbo, et al. Design of Robust Control System for Underwater Vehicle[J]. Journal of Shanghai Jiaotong University，1999，33(11): 1348-1351.
[6]Yaniv O．Quantitative Feedback Design of Liner and Nonlinear Control Systems[M]．New York: Kluwer Academic Publishers, 1999.
[7]曹健，马育华，武晓峰. QFT在连续回转电液伺服马达中的应用[J]. 哈尔滨工业大学学报，2009，41(11)：69-72，128.
Cao Jian, Ma Yuhua, Wu Xiaofeng. Application of QFT in Continuous Rotary Electro-hydraulic Servo Motor[J]. Journal of Harbin Institute of Technology, 2009，41(11)：69-72，128.
[8]张福星，朱荣，熊威，等. 基于定量反馈理论的微型飞行器增稳控制器[J]. 清华大学学报(自然科学版)，2010，50(2)：219-223.
Zhang Fuxing, Zhu Rong, Xiong Wei, et al. Augmented-stability Controller for Micro Air Vehicle Based on Quantitative Feedback Theory[J]. Journal of Tsinghua University(Science and Technology), 2010，50(2)：219-223.
[9]Horowitz I. Survey of Quantitative Feedback Theory[J]. International Journal of Control, 1991, 53(2): 255-291.
[10]肖永利，张琛，陈文华．定量反馈理论(QFT)及其设计应用[J]. 信息与控制，1999，28(6)：437-445.
Xiao Yongli, Zhang Chen, Chen Wenhua. Quantitative Feedback Theory and Its Design Applications[J]. Information and Control，1999，28(6)：437-445.

[1]	ZHANG Min-Jie, WANG Qiang-Jiu, GUAN Cheng. Simulation Research of Parallel Hydraulic Hybrid Excavator [J]. J4, 201016, 21(16): 1932-1936.
[2]	ZHAN Xiao-Lei, XIN Hong-Bing, HAN Shi-·Bi-De-　Lan-Te-Shi. Kinematics Simulation of MOTOMAN-HP3 Robot Based on Virtual Reality [J]. J4, 201016, 21(16): 1952-1954,1998.
[3]	JIANG Jiguang, HOU Jue, SU Chengzhi, BA Qijiao, TIAN Aixin, XU Mingyu. Research on Optimal Pose Set Planning Method under Physical Constraint Robot Kinematics Calibration [J]. China Mechanical Engineering, 2024, 35(03): 472-480.
[4]	LUO Longjun, HE Xiaofeng, LIU Xun, ZHANG Qiaxuan, HUANG Hewen. Design of Experimental Device for Sealing Performance of Hydraulic Pump Plungers [J]. China Mechanical Engineering, 2024, 35(02): 229-235.
[5]	DU Xu, CHANG Zexin, ZHENG Junqiang, REN Pengfei. A Real-time Tool Path Smoothing Algorithm Considering Joint Jerk Constraints [J]. China Mechanical Engineering, 2024, 35(02): 280-286.
[6]	CHEN Zhuofan, ZHOU Kun, QIN Feifei, WANG Binrui. Inverse Kinematics Solution of Robots Based on IQPSO Algorithm [J]. China Mechanical Engineering, 2024, 35(02): 293-304.
[7]	RONG Yu, CHEN Gang, DOU Tianci, . A Multi Index Comprehensive Optimal Anti Impact Trajectory Planning Method [J]. China Mechanical Engineering, 2024, 35(02): 305-316.
[8]	LIU Yi, YI Wangmin, YAO Jiantao, WANG Xingda, YU Peng, ZHAO Yongshen. Design and Research of Heavy-duty Posture-adjusting Assembly Robots in Narrow Space [J]. China Mechanical Engineering, 2024, 35(02): 324-336.
[9]	WANG Weijun, YANG Guilin, DU Qinghao, CHEN Qingying, . Design of 3K Planetary Gear Reducers with No Backlash [J]. China Mechanical Engineering, 2024, 35(01): 36-44,55.
[10]	CHEN Zhongyuan, CHEN Ke, LIU Hao, OUYANG Xiaoping, . Low-speed Dead Zone Adaptive Compensation Method for Drive Units of Supernumerary Robotic Limbs [J]. China Mechanical Engineering, 2024, 35(01): 56-66.
[11]	YE Bosheng, JIN Xiongcheng, LI Han, SHAO Baiyan, LI Xiaokun, LI Siao. Robot Error Compensation Algorithm by Pseudo Target Iterative Generation [J]. China Mechanical Engineering, 2024, 35(01): 136-143.
[12]	SHANG Miao, LI Yan, YANG Mingshun, ZHENG Jianming, JING Zhangshuai. Study on Critical Angle in Single-point Incremental Forming with Hydraulic Supporting [J]. China Mechanical Engineering, 2024, 35(01): 181-189.
[13]	CHEN Lijuan, WU Die, GAO Wei, WEI Longzheng, CAO Shengwei, AI Chao, LI Jingbin. Research on Active Power Control of Hydraulic Wind Turbines Based on Feedback Linearization and Nonlinear Disturbance Compensation [J]. China Mechanical Engineering, 2023, 34(23): 2889-2897.
[14]	TANG Yang, ZHANG Wudi, ZHANG Yulin, WANG Yuan, . Simulation and Experimental Study on Slip Bearing Performance and Pipe Wall Damage Characteristics of Pipeline Plugging Robots [J]. China Mechanical Engineering, 2023, 34(22): 2758-2771.
[15]	ZHU Zongming, JI Suqiang, WANG Hao, TANG Puhua, LIANG Liang. Hemodynamics Analysis of Interventional Robots in Diagnosis and Treatment Based on Fluid-structure Interaction [J]. China Mechanical Engineering, 2023, 34(21): 2592-2599.