OU Guo-Fu, XIE Jian, ZHANG Li-Te, RAO Jie, JIN Gao-Zhe. Development of a Rotary Test Apparatus for Liquid-solid Two Phase Flow Erosion Wear[J]. China Mechanical Engineering, 2013, 24(13): 1705-1709.
[1]Gnanavelu A,Kapur N,Neville A,et al.An Integrated Methodology for Predicting Material Wear Rates Due to Erosion[J].Wear,2009,267(11):1935-1944.
[2]刘娟,许洪元,齐龙浩.水力机械中冲蚀磨损规律及抗磨措施研究进展[J].水力发电学报,2005,24(1):113-117.
Liu Juan,Xu Hongyuan,Qi Longhao.The Development of Study on the Abrasive Rules and Anti-abrasive Technique of Hydraulic Machines[J].Journal of Hydroelectric Engineering,2005,24(1):113-117.
[3]Hamed A,Tabakoff W,Wenglarz R.Erosion and Deposition in Turbomachinery[J].Journal of Propulsion and Power,2006,22(2):350-360.
[4]Suckling M,Allen C.The Design of an Apparatus to Test Wear of Boiler Tubes[J].Wear,1995,186/187(1):266-272.
[5]Postlethwaite J,Holdner D N.Wall Mass Transfer in Horizontal Slurry Pipelines[J].The Canadian Journal of Chemical Engineering,1975,53(1):31-35.
[6]Zu J B,Hutchings I M,Burstein G T.Design of a Slurry Erosion Test Rig[J].Wear,1990,140(2):331-344.
[7]Gnanavelu A,Kapur N,Neville A,et al.A Numerical Investigation of a Geometry Independent Integrated Method to Predict Erosion Rates in Slurry Erosion[J].Wear,2011,271(5/6):712-719.
[8]张玉萍,周永欣,吕振林,等.射流式冲蚀磨损试验机的研制[J].铸造设备研究,2006(4):9-11.
Zhang Yuping,Zhou Yongxin,Lü Zhenlin,et al.Design and Manufacture of Multi-function Slurry Test Rig[J].Research Studies on Foundry Equipment,2006(4):9-11.
[9]Desale G R,Gandhi B K,Jain S C.Development of Correlations for Predicting the Slurry Erosion of Ductile Materials[J].Journal of Tribology,2011,133 (3):031603(1-10).
[10]Tsai W,Humphrey J A C,Cornet I,et al.Experimental Measurement of Accelerated Erosion in a Slurry Pot Tester[J].Wear,1981,68(3):289-303.
[11]Clark H M.On the Impact Rate and Impact Energy of Particles in a Slurry Pot Erosion Tester[J].Wear,1991,147(1):165-183.
[12]Desale G R,Gandhi B K,Jain S C.Improvement in the Design of a Pot Tester to Simulate Erosion Wear due to Solid-liquid Mixture[J].Wear,2005,259(1/6):196-202.
[13]蒋娜娜,徐臻,陈大融,等.旋转圆盘空蚀试验中的硅材料破坏过程研究[J].摩擦学学报,2007,27(4):393-397.
Jiang Nana,Xu Zhen,Chen Darong,et al.Study on Material Damage Process of Si under Rotating Disk Test[J].Tribology,2007,27(4):393-397.
[14]Lin F Y,Shao H S.Effect of Impact Velocity on Slurry Erosion and a New Design of a Slurry Erosion Tester[J].Wear,1991,143(2):231-240.
[15]Abouel A K,Abd Y M,Emara K M,et al.Design and Performance of Slurry Erosion Tester[J].Journal of Tribology,2010,132(2):021601(1-10).
[16]Dosanjh S,Humphrey J A C.The Influence of Turbulence on Erosion by a Particle-laden Fluid Jet[J].Wear,1985,102(4):309-330.
[17]Hawthorne H M,Xie Y,Yick S K.A New Coriolis Slurry Erosion Tester Design for Improved Slurry Dynamics[J].Wear,2003,255(1):170-180.
[18]Muscara J,Sinnott M J.Construction and Evaluation of a Versatile Abrasive Wear Testing Apparatus[J].Metals Engineering Quarterly,1972,12(2):21-23.
[19]Avery H S.Classification and Precision of Abrasion Test[C]//Wear of Materials.New York:ASME,1977:148-157.
[20]刘家睿,周平安,王小同,等.材料的冲蚀磨损与微动磨损[M].北京:机械工业出版社,1984.
[21]Li S K,Humphrey J A C,Levy A V.Erosive Wear of Ductile Metals by a Particle-laden High Velocity Liquid Jet[J].Wear,1981,73(2):295-309.
[22]Lin F Y,Shao H S.The Effect of Impingement Angle on Slurry Erosion[J].Wear,1991,141(2):279-289.
[23]鲍崇高,高义民,刑建东,等.水轮机用不锈钢材料的冲蚀磨损性能研究[J].机械工程学报,2002,38(2):8-10.
Bao Chonggao,Gao Yimin,Xing Jiandong,et al.Study on Erosion-wear Resistance on Steel Stainless Used in Turbine[J].Chinese Journal of Mechanical Engineering,2002,38(2):8-10.
[24]Levy A V,Yau P.Erosion of Steels in Liquid Slurries[J].Wear,1984,98:163-182.