1.The State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing,400030
2.Zhejiang Shuanghuan Driveline Co., Ltd.,Taizhou,Zhejiang,317600
3.The State Key Laboratory of Fluid Power and Control,Zhejiang University,Hangzhou,310028
Online:2013-06-10
Published:2013-06-04
Supported by:
The National Key Technology R&D Program(No. 2011BAF09B07)
ZHANG Jing-1, CHEN Bing-Kui-1, TUN Chang-Hong-2, LI Chao-Yang-1, 3. Analysis of Effect of Taper Roller Bearing Preload on Gear Whine in Manual Transmission[J]. China Mechanical Engineering, 2013, 24(11): 1453-1458.
[1]庞剑,甚刚,何华.汽车噪声与振动:理论与实践[M].北京:北京理工大学出版社,2006.
[2]沈云波,方宗德, 赵宁. 齿廓方向修形的斜齿面齿轮啮合特性研究[J]. 中国机械工程, 2008, 19(18): 2219-2222.
Sheng Yunbo, Fang Zongde, Zhao Ning. Meshing Performance of Modified Face Gear Drive with Helical Pinion in the Profile Direction[J]. China Mechanical Engineering, 2008, 19(18): 2219-2222.
[3]Conry T F, Seireg A. A Mathematical Programming Technique for the Evaluation of Load Distribution and Optimal Modifications for Gear Systems[J]. Journal of Engineering for Industry, 1973, 95(4):1115-1123.
[4]Velex P, Ajmi M. On the Modeling of Excitations in Geared Systems by Transmission Errors[J]. Journal of Sound and Vibration, 2006, 290(2): 882-909.
[5]Purohit R K, Purohit K. Dynamic Analysis of Ball Bearings with Effect of Preload and Number of Balls[J]. Int. J. of Applied Mechanics and Engineering, 2006, 11(1): 77-91.
[6]李为民. 圆锥滚子轴承轴向定位预紧刚度计算[J]. 轴承, 2004(5): 1-3.
Li Weimin. Rigidity Calculation of Axial Position Preload Taper Roller Bearings[J]. Bearing, 2004(5): 1-3.
[7]Harris T A, Kotzalas M N. Essential Concepts of Bearing Technology[M]. New York: CRC Press, 2006.
[8]Fyfe K R, Munck E D S. Analysis of Computed Order Tracking[J]. Mechanical Systems and Signal Processing, 1997, 11(2): 187-205.
[9]Bossley K M, Mckendrick R J, Harris C J, et al. Hybrid Computed Order Tracking[J]. Mechanical Systems and Signal Processing, 1999, 13(4): 627-641.