[1]Yeh S S,Tu M F.A Novel Approach to the Designof NURBS Interpolator for Advanced Motion Sys-tems[C]//Proceedings of the 2005 IEEE Interna-tional Conference on Mechatronics.Taipei,2006:388-393.
[2]Yong T, Narayanaswami R.A Parametric Interpola-tor with Confined Chord Errors, Acceleration andDeceleration for NC Machining [ J].Computer-Aided Design,2003,35(13):1249-1259.
[3]Nam S H, Yang M Y.A Study on a GeneralizedParametric Interpolator with Real- time Jerk-lim-ited Acceleration [J].Computer-Aided Design,2004,36(l):27-36.
[4]Lin M T, Tsai M S, Yau H T.Development ofReal-time Look-ahead Algorithm for NURBS In-terpolator with Consideration of Servo Dynamics[C]//Proceedings of the 46th IEEE Conference onDecision and Control.New Orleans, LA, USA,2007:1862-
1867.
[5]Shi X G,Xu B G,Xie W,et al.Design and Imple-mentation of S-shape Acceleration/DecelerationAlgorithm Based on Rounding Error CompensationTactic[C]//Proceedings of the 7th World Congresson Intelligent Control and Automation.Chongqing 2008:7912-7916.
[6]张晓辉[1,2],于东[2],胡毅[1,2],孙维堂[2].基于滤波技术的NURBS曲线插补算法研究[J].中国机械工程,2009(14):1695-1699.
[7]董伯麟[1],王治森[2],韩江[2].高速高精度加工中NURBS曲线混合插补算法[J].农业机械学报,2008,39(6):174-178.
[8]Song F, Hao S H, Hao M H,et al.Research on Ac-celeration and Deceleration Control Algorithm ofNC Instruction Interpretations with High-orderSmooth[C]//International Conference on IntelligentRobotics and Applications.Wuhan,2008:548-557.
[9]郝双晖,宋芳,郝明晖,等.移动平均加减速控制算法的研究[J].东北大学学报(自然科学版),2008,29(s1):222-225.
[10]于东[1],胡韶华[1],盖荣丽[1,2],柏占伟[3].基于滤波技术的数控系统加减速研究[J].中国机械工程,2008,19(7):804-807.
[11]刘可照[1],彭芳瑜[1],吴昊[1],胡建兵[1].基于机床动力学特性的NURBS曲线直接插补[J].机床与液压,2004(11):19-22. |