[1]Oh S,Kim D,Oh B, et al. Real-time IMEP Estimation and Control Using an In-cylinder Pressure Sensor for a Common-rail Direct Injection Diesel Engine[J]. J. Eng. Gas Turbines Power, 2011,133(6): 1-9.
[2]万国强,黄英,张付军,等. 面向控制的柴油机IMEP在线计算方法及试验[J]. 内燃机学报, 2011, 29(3):277-281.
Wan Guoqiang, Huang Ying, Zhang Fujun, et al. On-line IMEP Calculation Method for Diesel Engine Control and Experimental[J]. Transactions of CSICE, 2011, 29(3):277-281.
[3]李建秋,欧阳明高,周明,等. 发动机飞轮转速的传递函数分析[J]. 内燃机学报,2001,19(6):582-587.
Li Jianqiu, Ouyang Minggao, Zhou Ming, et al. Transfer Function Analysis of the Engines Flywheel Speed[J]. Transactions of CSICE, 2001, 19(6):582-587.
[4]王赟松,褚福磊,郭丹. 基于二阶滑模技术的内燃机气缸压力的估计[J]. 内燃机学报,2004,22(6):556-561.
Wang Yunsong,Chu Fulei, Guo Dan. Cylinder Pressure Estimation for Engines Using Second-Order Sliding Modes[J]. Transactions of CSICE, 2004, 22(6):556-561.
[5]Williams J, Witter M C. Individual Cylinder IMEP Estimation Using Crankshaft Angular Velocity Measurements[J]. SAE Paper,2001-01-0990.
[6]Rackmil C I, Mckay D, Malaczynski G W. Method for Estimation of Indicated Mean Effective Pressure for Individual Cylinders from Crankshaft Acceleration: US, 7623955[P]. 2009-11-24.
[7]Kenji N, Tetsuya K, Yoichi T,et al. Estimation of Indicated Mean Effective Pressure Using Crankshaft Angular Velocity Variation[J]. SAE Paper,2011-32-0510.
[8]刘世元,杜润生,杨叔子. 利用转速波动信号在线识别内燃机气缸压力的研[J]. 内燃机工程,2000(3):37-43.
Liu Shiyuan, Du Runsheng, Yang Shuzi. Research on On-line Identification of In-cylinder Pressure by Using Speed Fluctuation Signal[J]. Chinese Internal Combustion Engine Engineering, 2000(3): 37-43. |