Simulation and Analysis of a New Type Buffer's Design Based on Nose Landing Gear Extension Technology

Abstract

Abstract:

Most carrier-based airplanes were catapult launched from carrier decks, and nose landing gear extended at the moment of separating. In this situation, the problem of an oleo-pneumatic buffer was studied to suit for catapult launch. Some different extension modes of buffer were discussed, and a new oleo-pneumatic buffer with two-stage chambers was studied for better take-off performance. The co-simulation models of nose landing gear were well established, subsequently, the catapult launch-extension simulation was carried out. The simulation results indicate that the combination of injecting high pressure gas and releasing potential energy is more effective; in addition, the improved buffer can actually extent more quickly.

Key words: carrier-based airplane, nose landing gear, buffer, extension, co-simulation

摘要：

针对舰载机的前轮拖曳弹射起飞方式,结合前起落架突伸技术对缓冲器构型进行了研究,确定了缓冲器的组合突伸模式。基于常规型双腔油气式缓冲器提出了改进的缓冲器构型,并通过适当减小缓冲器的反弹阻尼来缩短突伸时间。应用动力学仿真软件LMS Virtual.Lab与机械/液压仿真软件AMESim实现了舰载机前起落架弹射-突伸动力学联合仿真。仿真结果表明：缓冲器各关键参数的变化与理论计算结果一致;增加高压充气的突伸模式比单纯释放储存势能的突伸模式能够获得更好的突伸效果,改进设计型缓冲器可有效缩短突伸时间。



关键词:

舰载机, 前起落架, 缓冲器, 突伸, 联合仿真

CLC Number:

V214
V226

WANG Tong, HU Feng, NIE Hong.

Simulation and Analysis of a New Type Buffer's Design Based on Nose Landing Gear Extension Technology

[J]. China Mechanical Engineering, 2012, 23(3): 330-334,338.

王彤, 许锋, 聂宏.

基于前起落架突伸技术的新型缓冲器仿真设计分析

[J]. 中国机械工程, 2012, 23(3): 330-334,338.

[1]	LIU Xuemei；LIU Tao；GUO Huan. Optimization of Buffer Allocations in Hybrid Production Lines Based on Availability Evaluation [J]. China Mechanical Engineering, 2020, 31(18): 2220-2230.
[2]	JIANG Jingang1;CHEN Houjun1;MA Xuefeng1;ZHANG Yongde1;LIU Yi2. Forming Planning Method and Experimentation of Personalized Orthodontic Archwires [J]. China Mechanical Engineering, 2020, 31(11): 1323-1330,1336.
[3]	LI Lianhui1;XU Guanying2;GAO Yang1;MAO Chunlei3;WANG Hongguang4. Evaluation of Product Process Planning Schemes for Green Manufacturing [J]. China Mechanical Engineering, 2019, 30(17): 2100-2107.
[4]	HAN Yiyong1,2;SHANG Yibao1;LIAO Shengyou2;LUO Haofeng2;CHEN Weifeng2;PAN Jiaying1;WEI Haiqiao1. Optimization of Hydraulic Brake Piston Springbacks in Rapid Compression Machines [J]. China Mechanical Engineering, 2019, 30(16): 1911-1915.
[5]	Yang Xiaobo, Liu Yanyan, Yang Jin, Gao Junfeng. Study on Stiffness and Damping Parameters of Parallel Link-Manipulator's Suspension System [J]. China Mechanical Engineering, 2016, 27(23): 3130-3135.
[6]	Yao Xiaopeng, Huang Huachuan, Yin Guofu, Li Guangming . Accuracy Evaluation of CNC Machines Based on IEGF-AHP Algorithm [J]. China Mechanical Engineering, 2016, 27(23): 3215-3220.
[7]	Tu Bo, Tian Hua, Wei Haiqiao, Pan Mingzhang. Research on Buffering Process of Electro-hydraulic Variable Valve Train [J]. China Mechanical Engineering, 2016, 27(19): 2652-2658.
[8]	Yin Yin, Nie Hong, Wei Xiaohui, Zhang Ming, Ni Huajin. Dynamics and Fault Analyses of Certain Airplane Nose Landing Gear Emergency Lowering [J]. China Mechanical Engineering, 2015, 26(16): 2131-2136.
[9]	Wang Xianhong, Shi Guoquan. Applications of a New Logic Intelligent Inference Method in Scheduling Optimization of Mixed Production Lines [J]. China Mechanical Engineering, 2015, 26(10): 1320-1323.
[10]	Zhou Jianqiang1,2;Zhao Yanwei1;Hong Huanhuan1;Wang Huan1;He Lu1. Conduction Cooperation Method for Product Performance Conflicts Based on Extension Transformation [J]. China Mechanical Engineering, 2014, 25(5): 661-668.
[11]	Shi Peiming1;Jiang Jinshui1;Liu Bin1;Wang Jun2. Improved Method of EMD and Its Applications Based on Boundary Characteristic Scale Matching Extension Method [J]. China Mechanical Engineering, 2014, 25(12): 1616-1623.
[12]	. Research on Buffer Capacity for Mixed-model Assembly Lines Based on Markov Process [J]. China Mechanical Engineering, 2013, 24(18): 2524-2528.
[13]	LIN Feng-1, ZHANG Zheng-Gong-1, CHEN Qing-2. Research on Smooth NURBS Interpolation Algorithm Based on Feedrate Sensitive Point Identification [J]. China Mechanical Engineering, 2012, 23(9): 1060-1064.
[14]	LIU You-Ta, ZHOU Lai-Shui, WANG Zhi-Guo, WANG Xiao-Beng. Free-form Deformation Based on Polynomial Extension Factor for Parametric Surfaces [J]. China Mechanical Engineering, 2012, 23(5): 609-613.
[15]	WANG Ben-Chun-1, CHEN Bing-Fa-1, BO Liang-Feng-2. Extension Configuration Model of Product Scheme Design Based on Axiomatic Design [J]. China Mechanical Engineering, 2012, 23(19): 2269-2275.