Drive Scheme Design and Characteristic Analysis of Multi-range Hydro-mechanical CVT

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (21): 2641-2645.

Drive Scheme Design and Characteristic Analysis of Multi-range Hydro-mechanical CVT

Xu Liyou1;Zhou Zhili1;Peng Qiaoli1;Wang Binbin2

1.Henan University of Science & Technology,Luoyang,Henan,471003
2.YTO Group Corporation,Luoyang,Henan,471004

Online:2012-11-10 Published:2012-11-15
Supported by:

Henan Provincial Key Technology R&D Program（No. 102102210165）

多段式液压机械无级变速器方案设计与特性分析

徐立友1;周志立1;彭巧励1;王彬彬2

1.河南科技大学,洛阳,471003
2.中国一拖集团有限公司,洛阳,471004

基金资助:
河南省重点科技攻关计划资助项目（102102210165）；河南省基础与前沿技术研究计划资助项目（122300410245）
Henan Provincial Key Technology R&D Program（No. 102102210165）

Abstract

Abstract:

To improve the transmission ratio discontinuity problem during the gear shift process in a multi-gear fixed step ratio transmission of the tractors, a hydro-mechanical CVT for tractors was developed. Taking DFH 1302R tractor as the research object, the stepless speed regulation characteristics, condition of smooth shifting, torque characteristics, power split flow characteristics, efficiency characteristics and tractive characteristics of HMCVT were analyzed. By theoretical analysis, the results show that the designed HMCVT has advantages of wide speed governing range, large power transmission, high drive efficiency and steady transmission, which can meet the requirements of complicated variable working conditions of the tractors. 

Key words: hydro-mechanical(HM) transmission, continuously variable transmission(CVT), drive scheme, characteristic analysis

摘要：

针对目前拖拉机多挡有级变速器换挡过程中存在的传动比不连续问题,设计了一种新型多段式液压机械无级变速器。以东方红1302R拖拉机为对象,分析了其无级调速特性、平稳换段条件、转矩特性、液压功率分流比、效率特性及牵引特性。分析研究表明,所设计的液压机械无级变速器具有变速范围宽、传递功率大、效率高、传动平稳等优点,可较好地满足拖拉机复杂多变的作业工况要求。

关键词: 液压机械传动, 无级变速器, 传动方案, 特性分析

CLC Number:

XU Li-You-1, ZHOU Zhi-Li-1, BANG Qiao-Li-1, WANG Ban-Ban-2. Drive Scheme Design and Characteristic Analysis of Multi-range Hydro-mechanical CVT[J]. China Mechanical Engineering, 2012, 23(21): 2641-2645.

徐立友1, 周志立1, 彭巧励1, 王彬彬2. 多段式液压机械无级变速器方案设计与特性分析[J]. 中国机械工程, 2012, 23(21): 2641-2645.

[1]	HAN Ling, LIU Hongxiang, CAO Yue, REN Leilei. Model Predictive Control-based Starting Control Optimization Strategy for CVTs [J]. China Mechanical Engineering, 2020, 31(15): 1765-1771.
[2]	LUO Wei1;ZENG Hongyang1;ZHOU Yunshan1,2;HU Xiaolan2;ZHANG Feitie1;WEI Dong2. Optimization of Pressure Linearity of Energy-saving Reduction Circuits of CVT at Low Temperature [J]. China Mechanical Engineering, 2020, 31(10): 1197-1202,1212.
[3]	. Analysis of CVT Safe Operation Areas under Slip Control Mode Based on Elasto-hydrodynamic Lubrication Theory [J]. China Mechanical Engineering, 2019, 30(13): 1552-1557.
[4]	LUO Wei1;ZHOU Yunshan1，2;QU Daohai1;ZHANG Feitie1;HU Xiaolan1. Identification and Optimization Verification of Key Parameters for Pressure Fluctuations in Hydraulic Reduction Circuit of CVT [J]. China Mechanical Engineering, 2019, 30(10): 1178-1187.
[5]	WANG Qiucheng;WEI Ruihui;ZHANG Qijiong. Assessment of Carbon Emissions of Remanufacturing Processes of Used CVT [J]. China Mechanical Engineering, 2017, 28(18): 2224-2230,2267.
[6]	Guo Wei, Xu Xiaobin, Zhang Wu, Lu Zhengxiong. Analysis of Wire Rope Ring's Axial Misalignment in WR-CVT [J]. China Mechanical Engineering, 2016, 27(23): 3162-3166.
[7]	Hao Yunzhi1;Sun Dongye2;Lin Yupei1,2. Reliability Analysis of Continuously Variable Transmission Clamping Force Control Algorithm [J]. China Mechanical Engineering, 2014, 25(12): 1687-1693.
[8]	CENG Wen, WANG Yu-Xin, JIA Gong-Mei, QING Yan-Mei. Design and Optimum of Novel Mechanical CVT [J]. China Mechanical Engineering, 2013, 24(13): 1760-1764.
[9]	XIE Meng-1, CHENG Huo-1, SHU Gong-2. Mode Shifting Control of Plug-in Hybrid Electric System Equipped with Mechanic-electric CVT [J]. China Mechanical Engineering, 2012, 23(5): 585-589,594.
[10]	ZHANG Wu-1, 2, LIU Kai-1, CUI E-Hui-1, YUAN Wan-1, DIAO Dong-1. MB-CVT Metal Ring Elastic Mechanics Properties and Energy Loss [J]. China Mechanical Engineering, 2012, 23(21): 2535-2541.
[11]	HAO Yuan-Zhi-1, 2, SUN Dong-Shu-1, QIN Da-Tong-1, YIN Yan-Chi-1. Overall Efficiency Optimization of Duel-state Continuously Variable Transmission [J]. China Mechanical Engineering, 2011, 22(24): 3001-3005,3022.
[12]	ZHANG Wu, ZHOU Chun-Guo, LIU Kai. Research on Pulley Deformation of Metal Belt CVT [J]. China Mechanical Engineering, 2010, 21(15): 1771-1774.
[13]	ZHANG Wu, LIU Kai, ZHOU Chun-Guo, ZHANG Hai-Yuan, ZHANG Bao-Feng. Research on Friction Power Loss of Metal Belt Continuously Variable Transmission [J]. China Mechanical Engineering, 2010, 21(11): 1293-1297.
[14]	Cai Yuanchun;Zhou Yunshan;Zhang Feitie; Gao Shuai. Research on Durability Test System for Continuously Variable Transmission [J]. J4, 2009, 20(18): 0-2151.
[15]	Zhou Yunshan;Liu Jingang;He Xiahui;Li Quan. Optimization Design of CVT Cooling System Based on Improved Particle Swarm Optimization Algorithm [J]. J4, 2008, 19(15): 0-1889.