Study on Rapid Design of Key Parts for TBM

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (20): 2410-2413.

Previous Articles Next Articles

Study on Rapid Design of Key Parts for TBM

Wu Enqi1;Wang Rui1;Min Rui2;Sun Anbo1;Du Baojiang1

1.University of Shanghai for Science and Technology,Shanghai,200093
2.Mechanical Engineering Company,Shanghai Tunnel Engineering Co., Ltd.,Shanghai,200137

Online:2012-10-25 Published:2012-11-01
Supported by:
National Natural Science Foundation of China（No. 50875174）

盾构机关键部件快速设计技术研究

吴恩启1;王睿1;闵锐2;孙安波1;杜宝江1

1.上海理工大学,上海,200093
2.上海隧道工程股份有限公司机械制造分公司,上海,200137

基金资助:
国家自然科学基金资助项目（50875174);上海市重点学科建设项目(J50503)
National Natural Science Foundation of China（No. 50875174）

Abstract

Abstract:

A rapid virtual design system for key parts of TBM was developed.Based on the experience of design and construction for TBM and the correlative experimental data,an expert database was constructed.Firstly,more than two virtual prototypes were built by interactive design in real time.Secondly,the key parts and assembly were optimized by FEA.Through this method,human experience factor is decreased.The TBM development time is saved more than 30%.

Key words: tunnel boring machine(TBM), rapid design, virtual control, cutter

摘要：

提出了盾构机关键零部件的一种快速设计方法。首先创建一个互动的设计环境，结合盾构设计和施工的经验，以及相关的实验数据，快速建立两种及以上刀盘及驱动装置虚拟样机模型。然后对不同结构的零部件及整机进行仿真分析并比较,从而得到合理的结构。最后通过虚拟操控，检查各运动部件的干涉情况并进行改进。快速设计的使用降低了技术人员经验造成的影响，提高了刀盘及其驱动的设计效率和设计质量,产品开发周期缩短了30%以上。

关键词: 盾构机, 快速设计, 虚拟操控, 刀盘

CLC Number:

U455.31

TUN En-Qi-1, WANG Rui-1, MIN Dui-2, SUN An-Bei-1, DU Bao-Jiang-1. Study on Rapid Design of Key Parts for TBM[J]. China Mechanical Engineering, 2012, 23(20): 2410-2413.

吴恩启1, 王睿1, 闵锐2, 孙安波1, 杜宝江1. 盾构机关键部件快速设计技术研究[J]. 中国机械工程, 2012, 23(20): 2410-2413.

[1]	HU Rui;DU Xuesong;ZHU Caichao. Design of Shaper Cutter for Precision Machining Internal Beveloid Gears [J]. China Mechanical Engineering, 2020, 31(21): 2535-2541.
[2]	MA Yachao;ZHANG Peng;HUANG Zhiqiang;DENG Rong;YU Hongmei. Optimal Design for Cutter-layout of Global Force Balanced PDC Bits [J]. China Mechanical Engineering, 2020, 31(20): 2412-2419,2428.
[3]	LI Jiawei;DU Wenhao;HAN Changqing. Directional Tool Radius Compensation Solution of STS Turning Based on Segment Approximation [J]. China Mechanical Engineering, 2020, 31(17): 2017-2023.
[4]	ZHANG Yongbin, YAN Guanghe, LI Jianyuan, JIANG Chen. Milling Process Tests of Diamond Coated Micro-milling Cutters [J]. China Mechanical Engineering, 2020, 31(15): 1772-1777.
[5]	LI Qing1，2;XU Weijun3;ZHANG Meng2;YANG Haijian2;LIU Yunjin2. Theoretical Research and Practice of Machining Worm-face Gears by Flying Cutter Method [J]. China Mechanical Engineering, 2019, 30(23): 2835-2843.
[6]	SHU Linsen1,2;WANG Jiasheng1. Finite Element Simulations of Temperature Fields and Stress Fields in Laser Cladding Repair Processes of Milling Cutter Disks [J]. China Mechanical Engineering, 2019, 30(01): 79-84.
[7]	ZHU Jianmin;LI Yao;HE Dandan;TIAN Fengqing;LI Xiaoru. A New Method for Determining Equivalent Diameters of Milling Cutters [J]. China Mechanical Engineering, 2018, 29(05): 558-564.
[8]	YIN Yexi1,2;QIN Hengfeng1;ZHOU Houming1. Tool Path Planning Algorithm of Five-axis Machining Based on Directional Distance Theory [J]. China Mechanical Engineering, 2017, 28(22): 2681-2688.
[9]	SONG Liye;WAN Yingcai. Adaptive PID Control Based on RBF Neural Network for TBMs [J]. China Mechanical Engineering, 2017, 28(14): 1676-1682.
[10]	LING Jingxiu, SUN Wei, YANG Xiaojing, TONG Xin. Convergence Analysis of Stress Intensity Factor at Crack Tips for TBM Cutterheads [J]. China Mechanical Engineering, 2017, 28(10): 1143-1148.
[11]	Li Genggeng, Li Jubo, Chen Meili, Wang Bin, Li Tianxing, Xu Aijun. Interference-avoiding Methods between Cutters Back of Disc Cutter with Concave End and CNC Machined Spiral Bevel Gear Teeth [J]. China Mechanical Engineering, 2016, 27(14): 1866-1869,1876.
[12]	Li Bo, He Jun, Zheng Fangyan, Chen Dingfang, Wu Junfeng, Lü Xiaobo, Wu Youan. Research on Three-axis Linkage Shaping Technology for Non-circular Internal Gears [J]. China Mechanical Engineering, 2016, 27(11): 1455-1460,1483.
[13]	Han Jiang, Yang Qingyan, Zhang Kuibang, Xia Lian. Compensation for Cutter Errors of Spiral Bevel Gear CNC Machining [J]. China Mechanical Engineering, 2016, 27(05): 569-576.
[14]	Liu Can, Wu Jingquan, Liu Huanlao, Tan Guangyu. Spectral Derivation of Resultant Milling Force and Eccentric Estimation of Tool Based on Trigonometric Series Expansion [J]. China Mechanical Engineering, 2016, 27(02): 246-250,272.
[15]	Li Xiangjia, Dai Ning, Liao Wenhe, Guo Baosu, Wang Yongbo. An Algorithm for Tolerance Cutter-location Surface Generation of Measured Data Based on MLS Method [J]. China Mechanical Engineering, 2015, 26(8): 1040-1047,1057.

Study on Rapid Design of Key Parts for TBM

盾构机关键部件快速设计技术研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics