Closed-loop Supply Chain Strategy Analysis Based on Product Reliability and Product Time-utility Value

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (13): 1587-1592.

Previous Articles Next Articles

Closed-loop Supply Chain Strategy Analysis Based on Product Reliability and Product Time-utility Value

Li Chong;Liu Sifeng;Fang Zhigeng

Nanjing University of Aeronautics and Astronautics, Nanjing, 210016

Online:2012-07-10 Published:2012-07-17
Supported by:

National Natural Science Foundation of China（No. 90924022/G01）;
Key Program of National Social Science Foundation of China（No. 08AJY024）

基于产品可靠性和时效性的闭环供应链系统策略研究

李翀;刘思峰;方志耕

南京航空航天大学，南京，210016

基金资助:
国家自然科学基金资助项目（90924022/G01）；国家社会科学基金资助重点项目（08AJY024）
National Natural Science Foundation of China（No. 90924022/G01）;
Key Program of National Social Science Foundation of China（No. 08AJY024）

Abstract

Abstract:

Based on the dynamic characteristics of closed-loop supply chain logistics, this paper studied the effects of reused components on product quality from aspects of product reliability and product time-utility value. Then a model was built, which described the endogenous dynamic mechanism of product quality in closed-loop supply chains, and further studied the product effectiveness under different supply chain strategies. These provide effective analytical methods for the product analysis and management in closed-loop supply chains. 

Key words: closed-loop supply chain, supply chain management, product quality, strategy analysis

摘要：

通过分析闭环供应链系统的产品内在逻辑关联特征，从产品可靠性和时效性两方面揭示了老产品及其零部件的再利用与再制造对新产品质量的影响，并构建了闭环供应链系统中产品质量的系统演变模型。在此基础上，引入不同的闭环供应链策略，深入分析再制造策略对最终产品质量的影响。为产品质量分析提供了新的方法，也为闭环供应链系统的策略分析与管理提供了定量分析依据。


关键词: 闭环供应链, 供应链管理, 产品质量, 策略分析

CLC Number:

TB114
F273

LI Chong, LIU Sai-Feng, FANG Zhi-Geng. Closed-loop Supply Chain Strategy Analysis Based on Product Reliability and Product Time-utility Value[J]. China Mechanical Engineering, 2012, 23(13): 1587-1592.

李翀, 刘思峰, 方志耕. 基于产品可靠性和时效性的闭环供应链系统策略研究[J]. 中国机械工程, 2012, 23(13): 1587-1592.

References

[1]Zhang K M, Wen Z G. Review and Challenges of Policies of Environmental Protection and Sustain- able Development in China[J]. Journal of Environ- mental Management, 2008, 88(4) : 1249-1261.
[2]Hall J K, Daneke G A, Lenox M J. Sustainable De- velopment and Entrepreneurship: Past Contribu- tions and Future Directions[J]. Journal of Business Venturing, 2010, 25(5) 439-448.
[3]孙林岩[1],王蓓[1].逆向物流的研究现状和发展趋势[J].中国机械工程,2005,16(10):928-934.
[4]Stormer E. Greening as Strategic Development in Industrial Change--Why Companies Participate in Eco--networks[J]. GeoIorum, 2008, 39(1).. 32- 47.
[5]Kim S W. An Investigation on the Direct and Indi- rect Effect of Supply Chain Integration on Firm Per- formance[J]. International Journal of Production E- conomics, 2009, 119(2) .. 328-346.
[6]Emberson C, Storey J. Buyer--supplier Collabora- tive Relationships.- Beyond the Normative Accounts [J]. Journal of Purchasing and Supply Manage- ment, 2006, 12(5): 236-245.
[7]KimS H, Yoon S G, Chae S H, et al. Economic and Environmental Optimization of a Multi--site U- tility Network for an Industrial Complex[J]. Jour- nal of Environmental Management, 2010, 91 (3) : 690-705.
[8]Vachon S, Klassen R D. Green Project Partnership in the Supply Chain.. the Case of the Package Print- ing Industry[J] Journal of Cleaner Production, 2006, 14(6/7).. 661-671.
[9]路甬祥[1].走向绿色和智能制造——中国制造发展之路[J].中国机械工程,2010(4):379-386.
[10]Walker H, Di Sisto L, McBain D. Drivers and Barriers to Environmental Supply Chain Manage- ment Practices: Lessons from the Public and Pri- vate Sectors[J]. Journal of Purchasing and Supply Management, 2008, 14(1): 69-85.
[11]徐家旺[1,2],朱云龙[1],黄小原[3],邱若臻[3].闭环供应链管理问题的研究进展[J].系统工程,2008,26(8):1-10.
[12]Corbett C J, Klassen R D. Extending the Hori- zons: Environmental Excellence as Key to Impro- ving Operations[J]. Manufacturing Service Op- erations Management, 2006, 8 (1) : 5-22.
[13]Wadhwa S, Madaan J, Chan F T S. Flexible Deci- sion Modeling of Reverse Logistics System: a Val- ue Adding MCDM Approach for Alternative Selec- tion[J]. Robotics and Computer--Integrated Man- ufacturing, 2009, 25(2).. 460-469.
[14]Franea R B, Jones E C, Richards C N, et al. Multi--objective Stochastic Supply Chain Modeling to Evaluate Tradeoffs between Profit and Quality [J]. International Journal of Production Econom- ics, 2010, 127(2): 292-299.
[15]肖人彬[1],蔡政英[1].不确定质量水平下闭环质量链的成本模糊控制[J].计算机集成制造系统,2009,15(6):1207-1214.
[16]曹俊[1],熊中楷[1].闭环供应链中单个寡头制造商的价格和质量水平决策[J].统计与决策,2009(1):163-165.
[17]陶雪飞[1],曹俊[2].循环供应链中再制造件动态价格和质量决策[J].系统工程理论与实践,2010(4):603-610.
[18]Zikopoulos C, Tagaras G. Impact of Uncertainty in the Quality of Returns on the Profitability of a Single--period Refurbishing Operation[J]. Euro- pean Journal of Operational Research, 2007, 182 (1) 205-225.
[19]刘文杰[1],郭彩芬[1],王宁生[1].逆向供应链生产运作研究[J].中国机械工程,2005,16(17):1531-1535.
[20]Ling H. Study on Incentive Mechanism of MRCTM Closed--loop Supply Chain based on the Uncertainty Quality[C]//Advanced Materials Research. Progress in Measurement and Testing. Proceedings of 2010 In- ternational Conference on Advanced Measurement and Test. Sanya: AMT, 2010: 341-346.
[21]Luo W, Yang Y L. TPDP--OEM's Quality Con- trol Contracts in Closed--loop Supply Chain[C]// The 7th Wuhan International Conference on E-- Business. Wuhan, 2008.. 484-490.
[22]Ryu D, Chang S. Novel Concepts for Reliability Technology[J] Microelectronies Reliability, 2005, 45(3/4): 611-622.

Closed-loop Supply Chain Strategy Analysis Based on Product Reliability and Product Time-utility Value

基于产品可靠性和时效性的闭环供应链系统策略研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

[1]	Li Wenchuan1;Jing Yi2;Chen Yang2;Shen Binbin2. Recovery,Production and Distribution Collaborative Planning for Triple-echelon Closed-loop Supply Chain System [J]. China Mechanical Engineering, 2013, 24(22): 3030-3035.
[2]	DIAO Yan-Meng, LIU De-Shun, XU Xiao-Yan, ZHANG Dun. A Novel Quality Loss Cost Model for Product Tolerance Design [J]. China Mechanical Engineering, 2011, 22(11): 1347-1351.
[3]	DENG Jun, TU Zhong-Hua, TUN Zhao-Tong. Research on Mapping between Product Quality and Process Quality Based on Extension Theory [J]. China Mechanical Engineering, 2010, 21(17): 2070-2074.