China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (2): 197-201.

Previous Articles     Next Articles

Research on Three-ply Reconfigurable CNC System 

Wang Tao1;Liu Qingjian2;Wang Taiyong2;Wang Liwen1
  

  1. 1.Civil Aviation University of China,Tianjin,300300
    2.Tianjin Key Laboratory of Advanced Manufacturing Technologies and Equipments,Tianjin University,Tianjin,300072
  • Online:2011-01-25 Published:2011-01-27
  • Supported by:
     
    National Science and Technology Major Project ( No. 2009ZX04014-101-05);
    Science and Technology Development Program of Tianjin ( No. 08ZCKFGX02300)

具有3层重构能力的可重构数控系统

王涛1;刘清建2;王太勇2;王立文1
  

  1. 1.中国民航大学，天津，300300
    2.天津大学天津市先进制造技术与装备重点实验室，天津，300072
  • 基金资助:
    国家科技重大专项(2009ZX04014-101-05)；天津市科技发展计划资助项目(08ZCKFGX02300)；中国民航大学科研启动基金资助项目(09QD05S)
    National Science and Technology Major Project ( No. 2009ZX04014-101-05);
    Science and Technology Development Program of Tianjin ( No. 08ZCKFGX02300)

PDF

Abstract:

A software-hardware reconfigurable platform of CNC system was proposed.Then the reconfiguration strategy of hardware system was given and a guided software-reconfiguration development platform was designed. Through analyzing the functions of CNC system,the system reconfiguration was divided into kernel-function reconfiguration, task-function reconfiguration and auxiliary-function reconfiguration. On the basis of that, the interaction and co-design of hardware reconfiguration, software reconfiguration and modular reconfiguration was discussed.

Key words:

摘要：

提出了一个软硬件可重构的数控系统平台方案,给出了硬件系统的重构策略，并设计了一个引导型软件重构开发平台。通过对数控系统的功能分析，将重构分为核心功能重构、工作功能重构和辅助功能重构，并以此研究了数控系统硬件重构、软件重构和模块重构的关系和协同设计问题。

关键词:

CLC Number: 

鄂ICP备11005124号
Copyright © China Mechanical Engineering, All Rights Reserved.
Tel: 027-59750772，88011893　E-mail: paper@cmemo.org.cn
Powered by Beijing Magtech Co., Ltd.