Research on Intelligent Optimization Model for Constraint-driven Product Conceptual Design

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (15): 1770-1775.

Previous Articles Next Articles

Research on Intelligent Optimization Model for Constraint-driven Product Conceptual Design

Wang Weiwei;Yu Suihuai;Yang Gangjun;Yang Yanpu

Northwestern Polytechnical University, Xi’an, 710072

Online:2011-08-10 Published:2011-08-24
Supported by:

The National Key Technology R&D Program（No. 2006BAF01A44-3）;
National High-tech R&D Program of China (863 Program) （No. 2007AA040406）

约束驱动的产品形态概念设计智能优化模型研究

王伟伟;余隋怀;杨刚俊;杨延璞

西北工业大学,西安,710021

基金资助:
国家科技支撑计划资助项目(2006BAF01A44-3)；国家高技术研究发展计划(863计划)资助重点项目(2007AA040406)
The National Key Technology R&D Program（No. 2006BAF01A44-3）;
National High-tech R&D Program of China (863 Program) （No. 2007AA040406）

Abstract

Abstract:

An intelligent optimization method and model in connection with constraint-driven product conceptual design was developed to make the design evolution and optimization phase more objective and scientific. Firstly, the paper analyzed the constraints of product conceptual design and the principles of constraint-driven. Then, the framework of a constraint-driven product conceptual design intelligent optimization model was established. And the paper studied the algorithm mechanism and the supporting technologies on this basis. Finally, the optimization process of a kind of airport main fire engine was employed to demonstrate and test the method.

Key words:

product conceptual design, design constraint, constraint-driven, design optimization

摘要：

为了增强产品概念设计推敲和优化阶段的客观性和科学性,提高产品概念设计的效率,提出了产品概念设计约束驱动智能优化方法和模型。该方法首先分析了产品概念设计约束的特点和约束驱动的原理,建立了约束驱动的概念设计优化法模型框架,并在此基础上研究了其算法机制和相关支持技术,最后利用某款机场主力消防车概念设计的优化过程,对该方法进行了说明和验证。

关键词:

产品形态概念设计, 设计约束, 约束驱动, 设计优化

CLC Number:

TP391

WANG Wei-Wei, TU Duo-Fu, YANG Gang-Dun, YANG Yan-Pu.

Research on Intelligent Optimization Model for Constraint-driven Product Conceptual Design

[J]. China Mechanical Engineering, 2011, 22(15): 1770-1775.

王伟伟, 余隋怀, 杨刚俊, 杨延璞.

约束驱动的产品形态概念设计智能优化模型研究

[J]. 中国机械工程, 2011, 22(15): 1770-1775.

References

[1]姚珺[1],宁汝新[2],张旭[2],常向青[2].计算机辅助产品方案设计方法研究[J].中国机械工程,2002,13(18):1573-1576.
[2]谢涛[1],陈火旺[1],康立山[2].多目标优化的演化算法[J].计算机学报:997-1003.
[3]Shi Chuan, Li Qingyong, Shi Zhongzhi. A QuickMulti--objective Evolutionary Algorithm Based onDominating Tree[J]. Journal of Software, 2007,3(18):505-516.
[4]张勇[1],黄克正[1],王卫国[1],孟庆波[1].结构与公差同步设计的产品概念设计优化[J].计算机集成制造系统,2006,12(3):321-327.
[5]Dantan J Y, Anwer N, Mathieu L. Integrated Tolerancing Process for Conceptual Design[J].CIRPAnnals-- Manufacturing Technology, 2003, 52 ( 1 ) :135-138.
[6]杨刚俊[1,2],余隋怀[1],张恒昌[2],陈国定[1].滚切剪剪切机构优化设计系统的构建[J].机械设计,2009(3):63-66.
[7]刘婧[1,2],刘弘[1].基于多目标进化算法的手机概念设计优化[J].计算机工程与设计,2008,29(4):1013-1015.
[8]Andreoni G, Santambrogio G, Rabuffetti M, et al.Method for the Analysis of Posture and InterfacePressure of Car Drivers[J]. Applied Ergonomics,2002, 33(6): 511-522.
[9]Falou W E, Duchene J, Grabisch M, et al. Evalua-tion of Driver Discomfort during Long- durationCar Driving[J].Applied Ergonomics, 2003, 34:249-255.
[10]Porter J M, Gyi D E, Tait H A. Interface Pres-sure Data and the Prediction of Driver Discomfortin Road Trials [J].Applied Ergonomics, 2003,34: 207-214.
[11]Kolich M. Automobile Seat Comfort: OccupantPreferences vs. Anthropometric Accommodation[J]. Applied Ergonomics, 2003, 34: 177-184.
[12]罗仕鉴[1],朱上上[2],冯骋[3].面向工业设计的产品族设计DNA[J].机械工程学报,2008,44(7):123-128.
[13]刘肖健[1],孙守迁[2].基于能量优化的产品曲面人机设计[J].中国机械工程:976-980.
[14]Eastman C,Tay S J. A Database Supporting Evo-lutionary Product Model Development for Design[J]. Automation in Construction, 1999, 8(3):305-323.
[15]刘忠途[1],王启付[1],陈立平[1].CAD中的知识驱动研究[J].中国机械工程,2004,15(17):1537-1541.

Research on Intelligent Optimization Model for Constraint-driven Product Conceptual Design

约束驱动的产品形态概念设计智能优化模型研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	LIU You-Ta, ZHOU Lai-Shui, WANG Zhi-Guo, WANG Xiao-Beng. Free-form Deformation Based on Polynomial Extension Factor for Parametric Surfaces [J]. China Mechanical Engineering, 2012, 23(5): 609-613.
[2]	GUO Yu, AN Bei, LIAO Wen-He. Research on Associated Network Construction of Rapid Extended Manufacturing Tasks Based on Multi-view Model [J]. China Mechanical Engineering, 2011, 22(24): 2903-2908.
[3]	AN Bei-1, LIAO Wen-He-1, GUO Yu-1, SUN Wei-Gong-2. Study on Extended Manufacturing Task Planning Method Based on Correlation [J]. China Mechanical Engineering, 2011, 22(23): 2839-2844.
[4]	TUN Li-Hua, CHEN Xin-Du, CHEN Qiang-Xin, CHEN Xin. Research on Proactive Scheduling of Mould Shop Floor with Uncertain Processing Times [J]. China Mechanical Engineering, 2011, 22(21): 2560-2566.
[5]	TUN Chun-Yan-1, 2, JIN Xin-1, HE Yu-Lin-1, WANG Lei-1, LIU Hua-1. Load Calculation of Wind Turbine Subjected to Earthquake and Wind [J]. China Mechanical Engineering, 2011, 22(18): 2236-2240.
[6]	LEI Min, ZHOU Lai-Shui, WANG Xiao-Beng. Optimization of Fiber Steering in Composite Laminates Using a Curve Projection Algorithm [J]. China Mechanical Engineering, 2011, 22(16): 1993-1996.
[7]	HUANG Qing-Li, BO Hun, CHENG Yun-Yong, ZHOU Li-Min. Registration for Turbine Blade between Dense Cloud Data and CAD Model [J]. China Mechanical Engineering, 2011, 22(14): 1699-1703.
[8]	GUO Yin-Zhang, CENG Jian-Chao. Dynamic Modeling for Mechanical Product Collaborative Design Process Based on OPN and Decision Rules [J]. China Mechanical Engineering, 2011, 22(14): 1708-1714.
[9]	AN Bei, LIAO Wen-He, GUO Yu, LIU Jiao-Jian. Research on Construction Process of Extended Manufacturing Alliance [J]. China Mechanical Engineering, 2011, 22(12): 1434-1440.
[10]	ZHOU Jian-Hang, GAO Gong-Li, JI Zi-Cheng, JIAN Hua-Rong. Study on On-line Measurement Method of Fatigue Crack Length Based on Camera Automatically Tracking and Positioning [J]. China Mechanical Engineering, 2011, 22(11): 1302-1306,1336.
[11]	GAO Zhu-1, 2, JI Xiao-Min-1, GUO Hun-2, SHI Li-2. Analysis and Evaluation of Form Inheritance in Configuration Design of Brand Products [J]. China Mechanical Engineering, 2011, 22(11): 1341-1346.
[12]	BIE Feng-Feng, LIU Yang, ZHOU Guo-Jiang, LV Feng-Xia. Research on Fault Prediction Approach for Reciprocating Machinery Based on Local Wave Method and SVM Prediction Model [J]. China Mechanical Engineering, 2011, 22(6): 687-691.
[13]	TAO Jia, GUO Yu. A Study of Knowledge Model Supporting Rolling Stock Rapid Design [J]. China Mechanical Engineering, 2011, 22(6): 691-696.
[14]	ZHANG Ming, LIU Wei-Jun, BIAN Hong-You. Optimized Contour-parallel Offset Tool-path Linking Method Based on Free Region [J]. China Mechanical Engineering, 2011, 22(4): 468-473.
[15]	LIANG Hua-Dong, GE Feng, YANG Yo, BAO Bei-Fang. Function Matching and Selection for Product Design Based on Dependency Constraints [J]. China Mechanical Engineering, 2011, 22(2): 227-231.