Research on Natural Characteristics and Sensitivity for Torsional Vibration of a Vehicle Multistage Planetary Gears

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (1): 96-101.

Previous Articles Next Articles

Research on Natural Characteristics and Sensitivity for Torsional Vibration of a Vehicle Multistage Planetary Gears

Cai Zhongchang;Liu Hui;Xiang Changle;Cao huaxia

National Key Lab of Vehicular Transmission, Beijing Institute of Technology, Beijing, 100081

Online:2011-01-10 Published:2011-01-17
Supported by:
National Defense Basic Scientific Research Project（No. 40402060103）

车辆行星传动系统扭转振动固有特性及灵敏度分析

蔡仲昌;刘辉;项昌乐;曹华夏

北京理工大学车辆传动国家重点实验室，北京，100081

基金资助:
国防科工委基础研究资助项目(40402060103)
National Defense Basic Scientific Research Project（No. 40402060103）

Abstract

Abstract:

On the basis of Lagrangian equation, the pure torsional vibration model of a vehicle powertrain containing multistage planetary gears was established and used to investigate the similarity of natural characteristics when system was in different conditions. By using the real modal theory, the sensitivities of natural frequency to moment of inertia and stiffness were calculated and analyzed when system under a normal condition. The distribution law of natural frequency and the influence of the physical parameter on the natural frequency were obtained. Because of the change of torsional stiffness of joining in multistage planetary gears transmissions, the phenomenon of frequencies loci veering exists. The influence of frequencies loci veering on natural characteristic was discussed simply. It provides theoretical guidance for the dynamic analysis of multistage planetary gears.

Key words:

powertrain, multistage planetary gear transmission, torsional vibration, natural frequency, sensitivity

摘要：

基于拉格朗日方程建立了包含多级行星传动的车辆动力传动系统纯扭转振动模型，研究了不同工况下系统固有特性的相似性。以某挡位为例，利用实模态理论计算分析了系统各阶固有频率对各部件转动惯量和刚度的灵敏度，得到了系统的固有频率分布规律和物理参数对固有频率的影响，探讨了传动系统中由于连接件扭转刚度变化引起的模态跃迁现象，并初步分析了该现象对固有特性的影响，为车辆多级行星传动系统的动态分析奠定了基础。

关键词:

动力传动系统, 多级行星传动, 扭转振动, 固有频率, 灵敏度

CLC Number:

CA Zhong-Chang, LIU Hui, XIANG Chang-Le, CAO Hua-Jia.

Research on Natural Characteristics and Sensitivity for Torsional Vibration of a Vehicle Multistage Planetary Gears

[J]. China Mechanical Engineering, 2011, 22(1): 96-101.

蔡仲昌, 刘辉, 项昌乐, 曹华夏.

车辆行星传动系统扭转振动固有特性及灵敏度分析

[J]. 中国机械工程, 2011, 22(1): 96-101.

[1]	KAN Junwu;HE Hengqian;WANG Shuyun;LIAO Weilin;ZHANG Zhonghua;CHEN Song;WU Yaqi. Rotary Magnet-coupled Generator with Frequency Adjustment Using Extensions of a Piezoelectric Simply-supported Beam [J]. China Mechanical Engineering, 2019, 30(23): 2857-2862.
[2]	ZHOU Chao1，2;ZHANG Xingzhong1;LIU Pingfei1;GUAN Jie3. Modeling and Natural Characteristic of Non-sinusoidal Oscillator of Continuous Casting Molds [J]. China Mechanical Engineering, 2018, 29(16): 1921-1926.
[3]	HAO Yaodong1，2;HE Zhicheng1;LI Guangyao1;ZHANG Zhuomin1. Uncertain Optimization of Torsional Vibration Damper Considering Tolerant Design [J]. China Mechanical Engineering, 2018, 29(14): 1645-1652,1660.
[4]	LI Yongquan1，2;SHE Yazhong2，3;WAN Yixin 1，2;ZHANG Lijie2，3. Elastodynamics Analysis of a Spherical 2-DOF Redundantly Actuated Parallel Robot [J]. China Mechanical Engineering, 2018, 29(10): 1179-1185.
[5]	MENG Cong;CHEN Chuan;YANG Yuhu. Modal Characteristic Analysis of RV Reducers [J]. China Mechanical Engineering, 2018, 29(01): 8-13.
[6]	WANG Xuan1,2;WANG Xiyang1. Measurement and Analysis of Torsional Vibration Signals for Diagnosing Planetary Gearbox Faults [J]. China Mechanical Engineering, 2018, 29(01): 49-56.
[7]	LIU Wenguang, GUO Longqing, HE Honglin, YAN Long. A Damage Identification Method of a Breathing Cracked Beam by Natural Frequency [J]. China Mechanical Engineering, 2017, 28(06): 702-707,713.
[8]	Zheng Jianxin, Hou Yali. Technological Experiments of Ultrasonic Deep Rolling with Longitudinal-torsional Vibration [J]. China Mechanical Engineering, 2016, 27(19): 2636-2640.
[9]	Liu Baixi, Wang Wenjun, Nie Songhui. Analyses of Natural Characteristics and Sensitivity for Torsional Vibration of RV Reducer [J]. China Mechanical Engineering, 2016, 27(03): 323-327.
[10]	Cheng Xiaoyong, Chen Guo, Liu Minghua, Zheng Qihui, Luo Yun, Hou Minli, Pu Liu. Analysis and Experimental Verification to Effects of Pipe Initial Installation Stress on Pipe's Natural Frequencies [J]. China Mechanical Engineering, 2015, 26(4): 512-517.
[11]	Li Guanghui, Yin Ningxia, Xu Hong, Tan Guangyu. Structure Design and Modal Analysis of Embeded Temperature Measuring Tool System [J]. China Mechanical Engineering, 2015, 26(21): 2862-2866.
[12]	Liu Rongsheng, Li Hui, Gao Yingjie, Yang Yulin. Vibration Analysis and Experimental Test of a Boom System of Truck Mounted Concrete Pump [J]. China Mechanical Engineering, 2015, 26(15): 2125-2129.
[13]	Huang Zhen, Zhao Wei. Theoretical Calculation and Experimental Analyses of Natural Frequency for High Frequency Dynamometer [J]. China Mechanical Engineering, 2015, 26(1): 7-11.
[14]	Shi Peiming1;Jiang Jinshui1;Liu Bin1;Wang Jun2. Improved Method of EMD and Its Applications Based on Boundary Characteristic Scale Matching Extension Method [J]. China Mechanical Engineering, 2014, 25(12): 1616-1623.
[15]	Huang Zhonghua;Xie Ya;Deng Yi. Hybrid Excavator Shafting Torsional Vibration Characteristics [J]. China Mechanical Engineering, 2014, 25(11): 1443-1446.

Research on Natural Characteristics and Sensitivity for Torsional Vibration of a Vehicle Multistage Planetary Gears

车辆行星传动系统扭转振动固有特性及灵敏度分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics