Research on Interface Joint Performances of New Tool System for High-speed CNC Machine Tools

China Mechanical Engineering ›› 2010, Vol. 21 ›› Issue (13): 1527-1530.

Previous Articles Next Articles

Research on Interface Joint Performances of New Tool System for High-speed CNC Machine Tools

Zhou Qinyuan1,2;Zhou Zhixiong1;Ren Yinghui1

1.Hunan University, Changsha, 410082

2.Zhangjiajie Aeronautical Industrial Vocational and Technical College, Zhangjiajie, Hunan,427000

Online:2010-07-10 Published:2010-07-15
Supported by:

National Science and Technology Major Project ( No. 2009ZX04012-031);
Hunan Provincial Scientific Research Foundation of Ministry of Education of China（No. 09C1306）

高速数控机床新型工具系统连接性能研究

周秦源1,2;周志雄1;任盈晖1

1.湖南大学,长沙,410082

2.张家界航空工业职业技术学院,张家界,427000

基金资助:
国家科技重大专项项目(2009ZX04012-031)；湖南省教育厅科研基金资助项目(09C1306)
National Science and Technology Major Project ( No. 2009ZX04012-031);
Hunan Provincial Scientific Research Foundation of Ministry of Education of China（No. 09C1306）

Abstract

Abstract:

Structural characteristics of a new tool system in high-speed CNC machine tools were studied by theoretical, experimental and numerical calculation method.A finite element model was constructed based on the new tool system accurately, the parameters of the clamping force, the amount of interference and rotation speed to link performance were analyzed and researched. Results of the study can be used as basis and instruction of parameters’ selection of new tool system for high-speed CNC machine tools in practical manufacture.

Key words: high-speed, tool system, connection, finite element analysis

摘要：

以高速数控机床新型工具系统结构特性为研究对象,通过理论研究、实验研究和数值计算等方法,在准确构建新型工具系统非线性接触有限元模型的基础上,分析和研究了夹紧力、过盈量和旋转速度等参数对其连接性能的影响。研究结果为高速数控机床新型工具系统在实际加工中参数的选取提供了依据和指导。

关键词:

高速, 工具系统, 连接, 有限元分析

CLC Number:

TG502.14

ZHOU Qin-Yuan, ZHOU Zhi-Xiong, LIN Ying-Hui.

Research on Interface Joint Performances of New Tool System for High-speed CNC Machine Tools

[J]. China Mechanical Engineering, 2010, 21(13): 1527-1530.

周秦源, 周志雄, 任盈晖.

高速数控机床新型工具系统连接性能研究

[J]. 中国机械工程, 2010, 21(13): 1527-1530.

[1]	JIA Rui-Xue, LEI Rong-Qing, LIU Ning, DONG Jing-Chao. A Method of Automatic Extracting Feature Point Coordinates Based on Circle Array Target [J]. J4, 201016, 21(16): 1906-1910.
[2]	SHEN Minmin, SHI Rui, GUO Pengfei, YANG Yang, YANG Xiaodong, YANG Jihou. Study on Vibration and Fatigue of Distributed Connection Structures of Reusable Aircrafts [J]. China Mechanical Engineering, 2024, 35(01): 45-55.
[3]	ZHU Fuxian, QIU Gang, ZHU Xingmin, XU Xianyi, ZHOU Jinyu. Failure Mode and Progressive Damage Analyses of Carbon-glass Hybrid Composite Single Nail and Single Shear Bolted Joints [J]. China Mechanical Engineering, 2023, 34(23): 2781-2793.
[4]	SUN Hao, YUAN Ye, ZHANG Qi, ZHANG Xiaobei. Path Planning Method of Aviation Cables Based on Improved A* Algorithm [J]. China Mechanical Engineering, 2023, 34(16): 1958-1964,1974.
[5]	CAO Junyi, LIU Qinghua, HONG Jun. Overview of Micro Friction to Macro Dynamics for Bolted Connections [J]. China Mechanical Engineering, 2021, 32(11): 1261-1273.
[6]	KUANG Yuchun;HUANG Hesong;MIN Taoyuan. Simulation and Optimization of Mechanics Behaviors of Top Drive Center Pipe Thread [J]. China Mechanical Engineering, 2019, 30(07): 786-793.
[7]	LI Cao;SHANG Xianyang;ZHOU Xin;LENG Yue. Study on Influence Factors of Connection Stiffness of Rocket Structure [J]. China Mechanical Engineering, 2018, 29(16): 1947-1951.
[8]	LIN Xiezhao;WANG Fuzhen. Multi-objective Optimization of Threaded Connection on Tension Rods for a Uniform Load Distribution between Teeth [J]. China Mechanical Engineering, 2017, 28(17): 2024-2028.
[9]	SUN Jian, LIU Yawen, GAO Yifeng, ZHAO Qilin, QI Liang. Experimental Ressearch on Mechanics Properties of Composite Pre-tightened Teeth Connection Based on Length Changes of Steel Teeth [J]. China Mechanical Engineering, 2017, 28(09): 1101-1105,1111.
[10]	Wu Changyou, Dai Ning, Liu Hao, Chen Xiaosheng, Li Dawei, Shen Zhenhong, Sun Dengguang. Fractal Tool Path Connection Technology Based on Improved Ant Colony Algorithm [J]. China Mechanical Engineering, 2016, 27(01): 58-65.
[11]	Wang Jun, Ma Can, Han Yali, Zhang Chun. Design of High-speed Tool Holder with Hydraulic Expansion System Driven by Centrifugal Force [J]. China Mechanical Engineering, 2015, 26(21): 2941-2945,2962.
[12]	Huang Zhengtao, Zhang Chaoyong, Luo Min, Xie Yang, Zhou Zhiheng. An Assessment Model of Energy Consumption for NC Turning Process Based on Principle of Conservation of Energy [J]. China Mechanical Engineering, 2015, 26(18): 2419-2426.
[13]	Zhang Lufan, Long Zhili, Nian Longsheng, Fang Jiwen, . Dynamics Characteristics Analysis in Multi-cases of Connection Frame in Macro/micro Motion Platform [J]. China Mechanical Engineering, 2014, 25(22): 3088-3092,3108.
[14]	WANG Wei, HU Xu-Jin, LING Ling. Method and Implementation of Substructure FRF Synthesis Considering Connection Property [J]. China Mechanical Engineering, 2013, 24(10): 1385-1389.
[15]	XU Zi-Wen-1, NA Jing-Xin-1, ZHANG Zhi-Yuan-2, WANG Tong-1. #br# Research on Elastic Contact of Finite Element Model of Bolted Connection [J]. China Mechanical Engineering, 2012, 23(15): 1830-1832,1839.

Research on Interface Joint Performances of New Tool System for High-speed CNC Machine Tools

高速数控机床新型工具系统连接性能研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics