Application on De-noise Processing of Wavelet Transform in Free-form Surface Reconstruction

Abstract

Abstract:

The application of wavelet transform in surface reconstruction de-noising was presented, and the offset points over the constructed original surface were wavelet-decomposed.Thus the lower frequencies of wavelet were extracted, and de-noise processing of wavelet transform was realized.The surface was reconstructed by NURBS of UG, and the precision and efficiency of the reconstruction was examined. Engineering examples prove that this method of de-noising is valid.

Key words: reverse engineering, surface reconstruction, wavelet analysis, NURBS

摘要：

介绍了小波变换去噪在曲面重构中的应用，首先对含噪声的原始曲面型值点数据进行小波分解，以提取小波低频分量，实现小波变换去噪处理，然后应用UG软件中的NURBS进行曲面重构。采用工程实例对小波去噪方法在曲面重构中的应用进行了验证，结果表明该方法能够提高曲面重构的精度与效率。

关键词:

逆向工程;曲面重构;小波分解, NURBS

CLC Number:

TP391

YANG Zheng-Yu, JIA Qiang-Guan, JIU De-Jian.

Application on De-noise Processing of Wavelet Transform in Free-form Surface Reconstruction

[J]. China Mechanical Engineering, 2010, 21(1): 63-66.

杨征宇, 夏庆观, 缪德建.

小波变换去噪处理在曲面重构中的应用

[J]. 中国机械工程, 2010, 21(1): 63-66.

[1]	ZHAO Xusheng1,4;YANG Jianzhong1;CHEN Jihong1;Alexander FRADKOV2;Oleg GRANICHIN3;HU Pengcheng1. Surface Reconstruction and Tool Path Generation Method for Remanufacturing of Damaged Blades [J]. China Mechanical Engineering, 2019, 30(24): 2906-2915,2924.
[2]	TIAN Mingming1;XIE Shejuan1,2; HAN Jie3,4;LI Peng2;PEI Cuixiang1;CHEN Zhenmao1. A Hybrid PECT/EMAT NDT Based on Wavelet Analysis [J]. China Mechanical Engineering, 2019, 30(16): 1925-1930.
[3]	ZHANG Hongxin;WANG Mingzhu;QIU Haoran;JIANG Jingang. 3D Reconstruction Method of Castings Based on Monocular Image Sequences [J]. China Mechanical Engineering, 2018, 29(23): 2799-2803,2814.
[4]	CHEN Shiping;WANG Zhenzhong;YU Hui;WANG Quanjin. Improved Wavelet Packet Multi Threshold Denoising Method and Its Engineering Applications [J]. China Mechanical Engineering, 2017, 28(20): 2414-2419.
[5]	WU Yapeng;WANG Jifang;XU Xiaoli;JIANG Zhanglei. Application Research of FastICA Noise Reduction Method Based on Wavelet Analysis in Fault Diagnosis of Rolling Bearing [J]. China Mechanical Engineering, 2017, 28(18): 2183-2188,2197.
[6]	Pan Hanming, Lei Liangyu, Wang Zihui. Fault Diagnosis of Permanent Magnets of Electric Car Hub Motor Based on Wavelet Analysis [J]. China Mechanical Engineering, 2016, 27(11): 1488-1492.
[7]	Shen Zhenhong, Dai Ning, Li Dawei, Wu Changyou. Generation of Branching Support Structures Based on Critical Angle Constraint [J]. China Mechanical Engineering, 2016, 27(08): 1107-1112.
[8]	Hu Xiaochun, Zhao Bao, Zhang Qingqing, Dong Liang. CAD Technique of Shoe Last Deformation Surface Reconstruction Based on Rotating Transformation [J]. China Mechanical Engineering, 2014, 25(22): 3044-3049.
[9]	ZHANG Ben-Guo-1, LI Jiang-1, WANG Ge-1, SUN Li-Feng-2, ZHANG Zhi-Ke-3. Temperature Data Processing for Breakout Prediction Based on Wavelet Analysis [J]. China Mechanical Engineering, 2012, 23(21): 2594-2596.
[10]	TANG Xian-Zhi, LIU Fei, LI Xu-Wu. Study on Layed Data Processing of Sheet Metal and Its Applications in Reverse Engineering [J]. China Mechanical Engineering, 2010, 21(06): 679-682.
[11]	Liu Baoqing;Dong Huimin. Research on the Interference Assembly Based on Surface Digital Model [J]. J4, 2009, 20(08): 0-1007.
[12]	Tan Guanghua;Chen Zhiyang;Zhang Sanyuan;Ye Xiuzi;Jiang Yuehua. Surface Reconstruction for Deformed Mesh Based on Original Surface Information [J]. J4, 2009, 20(01): 0-4.
[13]	Pei Yongsheng;Wang Liandong; Ruan Shijie. Application of Reverse Engineering in the Car Roof Multi-point Forming [J]. J4, 2008, 19(6): 0-750.
[14]	Liu Dafeng;Dai Ning;Sun Quanping;Liao Wenhe. Algorithm Based on Scanning Step for Finding All k Nearest Neighbors of Scattered Points [J]. J4, 2008, 19(4): 0-465.
[15]	Huang Kuidong;Zhang Dinghua;Wang Kai;Zhang Shunli. Digital Phantom Modeling Method Based on Cone-beam CT Images [J]. J4, 2008, 19(21): 0-2524.