China Mechanical Engineering ›› 2022, Vol. 33 ›› Issue (07): 786-796.DOI: 10.3969/j.issn.1004-132X.2022.07.004

Previous Articles     Next Articles

Design of Diameter-variable Wheels Based on Continuity and Steady Distribution of Slip Line

YIN Yonghui;CHEN Sichen   

  1. School of Mechanical and Power Engineering,East China University of Science and Technology,Shanghai,200237
  • Online:2022-04-10 Published:2022-05-04

滑移线连续和平稳分布的变径车轮设计

殷勇辉;陈司晨   

  1. 华东理工大学机械与动力工程学院,上海,200237
  • 作者简介:殷勇辉,男,1972年生,副教授。研究方向为产品创新设计、工程摩擦学。发表论文40余篇。E-mail:yhyin@ecust.edu.cn。

Abstract: Based on theories of wheel terrain contact dynamics, a new type of diameter-variable wheel, which was fit for sandy soil, with close fitting inner and outer double layers’ rigid rim and a central grouser was designed. The interaction mechanism between different sections of diameter-variable wheel and soil, and the soil flow slip model were analyzed. Through the detailed derivation and numerical calculation of the soil slip-line formulas, slip-line radius and equivalent wheel rim of the diameter-variable wheel were proposed. And then, the design ideas that the height of shear-slip section as main factor and inclination angel as auxiliary factor was put forward. The functional relationship among the height of shear-slip cross-section(the adjustable grouser) and inclination angle, and diameter ratio in smooth continuous slip-line model was established.

Key words: diameter-variable wheel, wheel soil interaction, terramechanics, grouser, slip line

摘要: 基于轮地接触动力学理论,设计出一种适应沙壤土环境、具有内外双层紧贴刚性轮片和中部轮刺的新型变径车轮。分析了变径轮不同断面与土壤的作用机理和土壤流动滑移模型,通过对滑移线公式详细推导和数值计算,获得其滑移半径和等效轮周的变化规律,提出了以断面高度为主、倾角为辅的设计思想。建立了满足平稳和连续滑移线模型的剪切滑移交错层断面(可调轮刺)高度与倾角和变径比的函数关系。

关键词: 变径轮, 轮地作用, 地面力学, 轮刺, 滑移线

CLC Number: