Quality Analysis for Abrasive Flow Precision Machining of Special-shaped Holes

doi:10.3969/j.issn.1004-132X.2021.17.007

Abstract

Abstract: The abrasive flow precision machining technology was used to carry out numerical simulation and experimental research for the special-shaped deep holes.A large-eddy simulation method was used to numerically analyze the titanium alloy shaped hole parts，and related experimental studies were conducted to reveal the creation mechanism of the surface of the abrasive flow machining special-shaped curved surfaces. The study finds that: the effects of dynamic pressure，velocity，the pressure of abrasive particles on wall surfaces and the effects wall shear force on wall surfaces were revealed through numerical analysis of precision machining of abrasive flow.The vortex position distribution and the cause of the vortex as well as the interaction relationship between the vortex and the abrasive particles in the flow directional sections of the special-shaped section holes were obtained；After precision machining by abrasive flow，the surface roughness of special-shaped curved surfaces improves from Ra=7.136 μm，Rz=40.103 μm to Ra=1.822 μm，Rz=8.964 μm respectively.The protrusions and spheroidization on the inner surfaces of the shaped holes are removed，and the surface quality is significantly improved.The vortex greatly improves the surface quality of the special-shaped curved surfaces.

Key words: abrasive flow precision machining, special-shaped hole, vortex analysis, surface quality

摘要： 采用磨粒流精密加工技术对异形截面深孔进行数值模拟及实验研究，通过大涡模拟方法对钛合金异形截面孔零件进行数值分析，并进行相关实验研究以揭示磨粒流抛光异形曲面的表面创成机理。磨粒流精密加工数值分析揭示了磨粒流动态压力、速度、磨粒对壁面压力和壁面剪切力对壁面作用规律，获得了异形截面孔内流向截面的漩涡位置分布与漩涡产生原因以及漩涡与磨粒相互作用关系。经过磨粒流精密加工后，异形曲面的表面粗糙度由Ra=7.136 μm、Rz=40.103 μm减小到Ra=1.822 μm、Rz=8.964 μm，异形截面孔内表面凸起、球化现象去除，表面质量明显改善，漩涡使异形曲面的表面质量得到大幅改善。

关键词: 磨粒流精密加工, 异形截面孔, 漩涡分析, 表面质量

CLC Number:

TP182

LI Junye, ZHU Zhibao, ZHANG Xinming, SHI Guangfeng, ZHAO Weihong, SU Ningning. Quality Analysis for Abrasive Flow Precision Machining of Special-shaped Holes[J]. China Mechanical Engineering, 2021, 32(17): 2063-2073.

李俊烨, 朱志宝, 张心明, 石广丰, 赵伟宏, 苏宁宁. 异形截面孔磨粒流精密加工质量分析[J]. 中国机械工程, 2021, 32(17): 2063-2073.

References

［1］王素艳. 汽车发动机活塞异形孔精密镗削微进给机构研究［J］. 机械设计与制造, 2014(6):109-111.
WANG Suyan. Research on Micro-feed Mechanism for Precision Boring of Special Shaped Holes in Automobile Engine Pistons［J］. Machinery Design Manufacture, 2014(6):109-111.
［2］汪红兵，张义平，李志荣，等. 大深径比微小深孔超声电火花加工工艺研究［J］. 现代制造工程， 2015（6）：110-114.
WANG Hongbing， ZHANG Yiping， LI Zhirong， et al. Research on an Ultrasonic Vibration Assisted Electrical Discharge Machining Technology of Micro Deep Hole with High Aspect Ratio［J］. Modern Manufacturing Engineering， 2015（6）：110-114.
［3］焦悦，贺斌，李朋，等. 大深径比微孔加工技术及其发展［J］. 航空科学技术， 2018， 29（3）：1-7.
JIAO Yue， HE Bin， LI Peng， et al. Development of Micro-holes Machining with High-aspect Ratio［J］. Aeronautical Science and Technology， 2018， 29（3）：1-7.
［4］郭景哲，贾宝贤，王冬生，等. 微细深孔加工研究进展及关键技术分析［J］. 机械设计与制造， 2009（10）：257-258.
GUO Jingzhe， JIA Baoxian， WANG Dongsheng， et al. Research Development and Analysis of the Key Technologies of Micro Deep Holes Machining［J］. Machinery Design Manufacture， 2009（10）：257-258.
［5］CAN PENG， YOUZHI FU， HAIBO WEI， et al. Study on Improvement of Surface Roughness and Induced Residual Stress for Additively Manufactured Metal Parts by Abrasive Flow Machining［J］. Procedia CIRP， 2018， 71：386-389.
［6］RHOADES L J. Abrasive Flow Machining［J］. Manufacturing Engineering， 1988，110（11）：75-78.
［7］FU Y， GAO H， YAN Q， et al. Rheological Charac terisation of Abrasive Media and Finishing Behaviours in Abrasive Flow Machining［J］. The International Joural of Advanced Mannfacturing Technology， 2020， 107：3569-3580.
［8］SUSHIL M， VINOD K， HARMESH K. Experimental Investigationand Optimization of Process Parameters of Al/SiC MMCs Finished by Abrasive Flow Machining［J］. Mater. Manuf. Process， 2015， 30（7）：902-911.
［9］DUVAL-CHANEAC M S， HAN S， CLAUDIN C， et al. Experimental Study on Finishing of Internal Laser Melting（SLM）Surface with Abrasive Flow Machining（AFM）［J］. Precis. Eng.， 2018， 54：1-6.
［10］LI JUN， JI Shiming， TAN Dapeng. Improved Soft Abrasive Flow Finishing Method Based on Turbulent Kinetic Energy Enhancing［J］. Chinese Journal of Mechanical Engineering， 2017， 30（2）：301-309.
［11］WANG A C， CHENG K C， CHEN K Y， et al. A Study on the Abrasive Gels and the Application of Abrasive Flow Machining in Complex-hole Polishing［J］. Procedia CIRP， 2018， 68：523-528.
［12］WANG A C， CHENG K C， CHEN K Y， et al. Finishing Performance of the Abrasive Flow Machining in Complex Holes by Using Helical Cores［J］. Key Engineering Materials， 2020， 831：52-56.
［13］计时鸣，葛江勤，高涛，等. 基于CFD-DEM耦合的面约束软性磨粒流加工特性研究［J］. 机械工程学报， 2018， 54（5）：129-141.
JI Shiming， GE Jiangqin， GAO Tao， et al. Study on Machinability of Surface-constrained Softness Abrasive Flow Based on CFD-DEM Coupled Method［J］. Journal of Mechanical Engineering， 2018， 54（5）：129-141.
［14］TAN D P, JI S M, FU Y Z. An Improved Soft Abrasive Flow Finishing Method Based on Fluid Collision Theory［J］. International Journal of Advanced Manufacturing Technology, 2016, 85(5/8):1261-1274.
［15］LI Junye， MENG Wenqing， DONG Kun， et al. Study of Effect of Impacting Direction on Abrasive Nanometric Cutting Process with Molecular Dynamics［J］. Nanoscale Research Letters， 2018， 13（11）：1-14.
［16］LI Junye， ZHANG Hengfu， WEI Lili， et al. Formation Mechanism and Quality Control Technology for Abrasive Flow Precision Polishing Vortex：Large Eddy Simulation［J］. The International Journal of Advanced Manufacturing Technology， 2019， 105：2135-2150.
［17］李俊烨，苏宁宁，张心明，等. 基于大涡模拟的伺服阀喷嘴磨粒流抛光数值研究［J］. 制造业自动化， 2017， 39（12）：90-94.
LI Junye， SU Ningning， ZHANG Xinming， et al. Numerical Study for Abrasiveflow Polishing of Servo Valve Nozzle Based on Large Eddy Simulation［J］. Manufacturing Automation， 2017， 39（12）：90-94.
［18］HAN S， SALVATORE F， RECH J， et al. Abrasive Flow Machining（AFM）Finishing of Conformal Cooling Channels Created by Selective Laser Melting（SLM）［J］. Precision Engineering， 2020， 64：20-33.
［19］BOULAND C， URLEA V， BEAUBIER K， et al. Abrasive Flow Machining of Laser Powder Bed-fused Parts：Numerical Modeling and Experimental Validation［J］. Journal of Materials Processing Technology， 2019， 273：1-13.
［20］党稼宁，雷力明，石磊，等. 增材制造燃油喷嘴特征件磨粒流抛光研究［J］. 航空制造技术， 2019， 62（7）：79-83.
DANG Jianing， LEI Liming， SHI Lei， et al. Study on Abrasive Flow Machining of Additive Manufacturing Fuel Nozzle Features［J］. Aeronautical Manufacturing Technology， 2019， 62（7）：79-83.
［21］KIM WW， MENON S. Application of the Localized Dynamic Subgrid-scale Model to Turbulent Wall-Bounded Flows［C］∥The 35th AIAA Aerospace Sciences Meeting & Exhibit. Reno， 1997：97-0210.

[1]	LI Xiaorui, ZHAO Wei, LI Hao, SHI Weiqi, HE Ning. Experimental Study of High-speed Turning of Hardened Bearing Steels under High-pressure Cryogenic CO2 Jet Cooling Conditions [J]. China Mechanical Engineering, 2023, 34(24): 2975-2985.
[2]	ZHANG Qicong, JIANG Chen, YE Hui, SHEN Lingxin, JIAO Mengdie. Design and Processing Research of Dynamic Pressure Assisted Non-Newtonian Fluid Polishing Tools [J]. China Mechanical Engineering, 2023, 34(23): 2805-2811，2823.
[3]	LI Jiaxuan, LI Lun, ZHOU Bo, ZHAO Jibin, ZHU Guang, WANG Zhengjia, . A Robotic Multi-directional Polishing Trajectory Generation Method Based on Preston-PSO Algorithm [J]. China Mechanical Engineering, 2023, 34(14): 1729-1740.
[4]	LI Hongyu, HUANG Xiangming, MING Yang, LI Xiyang, ZENG Qing, ZHOU Dongdong. Simulation and Experimental Study of Magnetic Field-assisted Shear Thickening Fluid Polishing for Cemented Carbide Blades [J]. China Mechanical Engineering, 2023, 34(06): 650-659.
[5]	WANG Ziguang, LIU Jinxin, YIN Jian, ZHOU Ping, SHA Zhihua, KANG Renke. Surface Quality of Ultra-precision Grinding of Silicon with Fine Diamond Grinding Wheels [J]. China Mechanical Engineering, 2023, 34(02): 245-251.
[6]	WANG Lanqing, HUANG Hui, CUI Changcai. Experimental Research of Surface Quality Evaluation Method for Wire Saw Sapphire Wafer [J]. China Mechanical Engineering, 2022, 33(17): 2023-2028.
[7]	LI Guochao, BAI Xiaoxiang, WANG Liming, LI Changming, LI Yousheng. Key Technologies and Development Trends of Multi-axis Tool Grinding Software [J]. China Mechanical Engineering, 2022, 33(08): 943-951.
[8]	LIU Xiao, DENG Wenjun, CHEN Haitao, ZHANG Baoyu. Scale Thorn Formation Regularity and Inhibitory Measures in Cryogenic Cutting Processes of Aluminum Alloy 7075 [J]. China Mechanical Engineering, 2022, 33(03): 261-269.
[9]	WU Ke, LU Xinming, MEHMOOD Awais, ZHOU Libo, YUAN Julong. Fixed Abrasive Based Self-rotation Grinding for Single Crystal Sapphire [J]. China Mechanical Engineering, 2021, 32(16): 2002-2007，2015.
[10]	LI Qiang, GUO Chenguang, ZHAO Lijuan, LENG Yuefeng, YUE Haitao. Milling Force Modeling of DD5 Ni-based Single Crystal Superalloy with Crystallographic Anisotropic Characteristics [J]. China Mechanical Engineering, 2021, 32(06): 734-740.
[11]	LI Junye1;LU Hui1;SU Ningning1;ZHANG Xinming1;ZHANG Hongwei2. Research on Quality Control of Abrasive Flow Precision Machining Nozzles Based on Large Eddy Simulation Smagorinsky Model [J]. China Mechanical Engineering, 2020, 31(10): 1169-1174.
[12]	XI Fengfei;ZENG Xi;JI Shiming;CHEN Guoda. Cobalt-based Alloy Material Removing Method under Photocatalytic Conditions [J]. China Mechanical Engineering, 2020, 31(06): 662-669.
[13]	SHI Wentian;HOU Yanjun;LIU Yude;LI Qiangqiang. Overview on Formation Mechanism and Research Progresses of Burrs in Micro Cutting [J]. China Mechanical Engineering, 2019, 30(23): 2809-2819,2828.
[14]	PENG Ruitao1;JIANG Haojian1;TANG Xinzi1;ZHANG Shan2. Directional Internal-cooling Tools and Their Machining Performances [J]. China Mechanical Engineering, 2019, 30(21): 2629-2635,2642.
[15]	SHI Wentian;HAN Dong;LIU Yude;HOU Yanjun. Surface Quality of Aramid Fiber Composites with Ultra-low Temperature and Micro-milling [J]. China Mechanical Engineering, 2019, 30(09): 1056-1064.

Quality Analysis for Abrasive Flow Precision Machining of Special-shaped Holes

异形截面孔磨粒流精密加工质量分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics