China Mechanical Engineering

Previous Articles     Next Articles

Detection Method for Internal Wall Corrosion of Drill Pipes Based on MFL Testing under AC and DC Magnetization

WANG Rongbiao1;KANG Yihua1,2;DENG Yongle1;WANG Biyao1;WANG Shenghan2;TANG Jian1   

  1. 1. School of Mechanical Science and Engineering, Huazhong University of Science and Technology,Wuhan, 430074
    2. Huagong Manufacturing Equipment Digital National Engineering Center Co., Ltd., Wuhan, 430074
  • Online:2021-01-25 Published:2021-02-01

钻杆内壁腐蚀的交直流复合磁化漏磁检测方法

王荣彪1;康宜华1,2;邓永乐1;王碧瑶1;汪圣涵2;唐健1   

  1. 1. 华中科技大学机械科学与工程学院,武汉,430074
    2. 华工制造装备数字化国家工程中心有限公司,武汉,430074
  • 基金资助:
    国家自然科学基金(51875226)

Abstract: The internal wall corrosion of drill pipes after long-term service is the main reason for the fracture of the drill pipes. For the detection of the inner wall corrosion of the drill pipes, a magnetic flux leakage detection method was proposed based on the composite magnetization. The induction coil array was applied to pick up the changes of the AC magnetic fields on the outer wall of the drill pipes. The wall thickness reduction caused by the corrosion of the inner walls might be evaluated. The insufficient range and insufficient sensitivity of hall sensors might be avoided when they were used to measure magnetic fields under strong background magnetic field. The relative magnetic permeability distribution above the wall thickness reduction was analyzed by the finite element simulation software, and the magnetic flux density change rates with and without wall thinning were compared. Simulation and experimental results show that the detection of wall thickness reduction of the drill pipes may be achieved by this method.

Key words: drill pipe, internal wall corrosion, wall thinning, composite magnetization, magnetic flux leakage (MFL) testing

摘要: 钻杆长期服役后内壁出现的腐蚀是造成钻杆断裂的主要原因,针对钻杆内壁腐蚀的检测,提出了一种基于复合磁化的漏磁检测方法。该方法通过阵列感应线圈拾取钻杆外壁交流磁场的变化,进而评价内壁腐蚀产生的壁厚减薄状态,规避了强背景磁场下用霍尔元件测量磁场时量程范围不足、灵敏度不够等问题。利用有限元仿真软件分析壁厚减薄上方的相对磁导率分布,对比了有、无壁厚减薄的磁感应强度变化率,仿真与实验结果表明该方法可以实现钻杆内壁壁厚减薄的检测。

关键词: 钻杆, 内壁腐蚀, 壁厚减薄, 复合磁化, 漏磁检测

CLC Number: