[1]TONG V C,HONG S W. Characteristics of Tapered Roller Bearing Subjected to Combined Radial and Moment Loads[J]. International Journal of Precision Engineering and Manufacturing: Green Technology,2014,1:323-328.
[2]张军,李红,方芳.圆锥滚子球基面的范成法磨削与分析[J].轴承,2012,10:23-24.
ZHANG Jun, LI Hong,FANG Fang. Generating Method Grinding and Analysis of the Base Surface of Tapered Roller Spherical[J]. Bearing,2012,10:23-24.
[3]胡浪,王文中,赵自强,等.双列圆锥滚子轴承滚子大端-引导边润滑接触分析[J].摩擦学学报,2013,33(1):22-28.
HU Lang, WANG Wenzhong, ZHAO Ziqiang, et al. Lubricated Contact Analysis of Roller Large End-flange in Double-row Tapered Roller Bearing[J]. Tribology,2013,33(1):22-28.
[4]王亚彪,孙伟,张旭,等.风电圆锥滚子轴承大挡边-滚子球端面接触分析方法[J].太阳能学报,2018,39(1):258-263.
WANG Yabiao, SUN Wei, ZHANG Xu, et al. Analysis Method for the Big Side of Tapered Roller Bearing with Wind Power and the End Face Contact of Roller Ball[J]. Acta Energiae Solaris Sinica,2018,39(1): 258-263.
[5]WERNER G. Influence of Work Material on Grinding Forces[J]. CIRP Annals,1978,27(1):243-248.
[6]MALKIN S. 磨削技术理论与应用[M]. 蔡光起,巩亚东,宋贵亮,译. 沈阳:东北大学出版社,2002.
MALKIN S. Theory and Application of Grinding Technology[M]. CAI Guangqi,GONG Yadong, SONG Guiliang,trans. Shenyang: Northeastern University Press,2002.
[7]李力钧,付杰才.磨削力的数学模型的研究[J].机械工程学报,1981,17(4):31-41.
LI Lijun,FU Jiecai. Research on Mathematical Model of Grinding Force[J].Chinese Journal of Mechanical Engineering,1981,17(4):31-41.
[8]DURGUMAHANTI U S P,SINGH V,RAO P V. A New Model for Grinding Force Prediction and Analysis[J]. International Journal of Machine Tools and Manufacture,2010,50(3):231-240.
[9]王君明,汤漾平,宾鸿赞,等.55钢平面磨削中未变形磨屑厚度及单位磨削力的研究[J]. 中国机械工程,2009,20(10):1176-1179.
WANG Junming,TANG Yangping,BIN Hongzan,et al. Research on Undeformed Chip Thickness and Unit Grinding Force during Surface Grinding of 55 Steel[J]. China Mechanical Engineering,2009,20(10):1176-1179.
[10]王君明,叶人珍,汤漾平,等.55钢CBN 砂轮平面磨削的磨削力模型研究[J].金刚石与磨料磨具工程,2010,30(1):67-70.
WANG Junming,YE Renzhen,TANG Yangping,et al. Research on the Grinding Force Model of Steel 55 during Surface Grinding with CBN Wheel[J]. Diamond and Abrasive Engineering,2010,30(1):67-70.
[11]LI C,ZHANG F H,MENG B B,et al. Material Removal Mechanism and Grinding Force Modelling of Ultrasonic Vibration Assisted Grinding for SiC Ceramics[J]. Ceramics International,2017,43(3):2981-2993.
[12]YIN G Q,GONG Y D,LI Y W,et al. Research on Force and Temperature Characteristics of Novel Point Grinding Wheels[J]. Journal of Mechanical Science and Technology,2018,32(8):3817-3834.
[13]田欣利,王龙,刘谦,等.20CrMnTi钢齿面磨削力模型构建与分析[J].机械工程学报,2018,54(3):227-232.
TIAN Xinli, WANG Long, LIU Qian, et al. Construction and Analysis of Grinding Force Model of 20CrMnTi Steel Tooth Surface[J]. Journal of Mechanical Engineering,2018,54(3):227-232.
[14]林炳成.圆锥滚子球基面磨床隔离盘转动运动分析与运用[J].轴承,2007,12:19-20.
LIN Bingcheng. Analysis and Application of Rotational Motion of Tapered Grinder Spherical Base Brinding Isolation Disc[J].Bearing,2007,12:19-20.
[15]任敬心,华定安. 磨削原理[M]. 北京:电子工业出版社,2011:1-61.
REN Jingxin, HUA Dingan. Principle of Grinding[M]. Beijing: Publishing House of Electronics Industry, 2011:1-61.
[16]JENSEN C P,JORGENSEN J F. Vickers Hardness Indentations Measured with Atomic Force Microscopy[J].Journal of Testing and Evaluation,1998,26(6):532-538.
[17]迟玉伦.基于功率信号的切入式磨削工艺优化关键技术研究[D].上海:上海理工大学,2016.
CHI Yulun. Study on the Key Technology of Plunge Grinding Optimization Based on Power Signal[D]. Shanghai:University of Shanghai for Science and Technology, 2016. |