[学科发展]风电装备故障诊断与健康监测研究综述

摘要/Abstract

摘要： 针对风力发电机传动链中的三大部件——复合材料叶片、齿轮箱、发电机的故障诊断与健康监测的发展现状进行文献综述，总结该领域的研究现状及主要方法。综述风电装备中复合材料叶片、齿轮箱、发电机三大部件的主要故障特点、故障形式及诊断难点，并结合国内外相关文献系统地介绍并比较了现有的针对三大部件的故障诊断与健康监测方法，最后对该领域的发展方向进行了展望。

关键词: 风电机组, 故障诊断, 健康监测, 复合材料, 齿轮箱, 发电机

Abstract: The development status of fault diagnosis and health monitoring of the three major components of wind turbine drive chain, namely composite blade, gearbox and generator, were reviewed.The research status and methods in this field were also summarized. The main fault characteristics, fault forms and diagnosis difficulties of composite blades, gearboxes and generators in wind power equipment were summarized, and the existing fault diagnosis and health monitoring methods for the three components were also systematically presented and compared. Finally, the development direction of this field was prospected.

Key words: wind turbine； fault diagnosis； health monitoring； composite, gearbox；generator

中图分类号:

TH17

陈雪峰, 郭艳婕, 许才彬, 商红兵. [学科发展]风电装备故障诊断与健康监测研究综述[J]. 中国机械工程.

CHEN Xuefeng, GUO Yanjie, XU Caibin, SHANG Hongbing. Review of Fault Diagnosis and Health Monitoring for Wind Power Equipment[J]. China Mechanical Engineering.

参考文献

[1]CHU S, MAJUMDAR A. Opportunities and Challenges for a Sustainable Energy Future[J]. Nature, 2012, 488(7411): 294-303.

[2]CHEN Xuefeng, YAN Ruqiang, LIU Yanmeng, et al. Wind Turbine Condition Monitoring and Fault Diagnosis in China[J]. IEEE Instrumentation & Measurement Magazine, 2016, 19(2): 22-28.

[3]TAUTZ-WEINERT J, WATSON S J. Using SCADA Data for Wind Turbine Condition Monitoring: a Review[J]. IET Renewable Power Generation, 2017, 11:382-394.

[4]SU Chuang, HU Zhaoyong. Reliability Assessment for Chinese Domestic Wind Turbines Based on Data Mining Techniques[J]. Wind Energy, 2018, 21: 198-209.

[5]HIRTH L, MULLER S. System-friendly Wind Power How Advanced Wind Turbine Design Can Increase the Economic Value of Electricity Generated through Wind Power[J]. Energy Economics, 2016, 56: 51-63.

[6]中国可再生能源学会风能专业委员会. 2012年全国风电设备运行质量调查概述[J]. 风能, 2013(9):37-45.

Wind Energy Committee of China Renewable Energy Society. Overview of National Wind Power Equipment Operation Quality Survey in 2012[J]. Wind Energy, 2013(9):37-45.

[7]桂勇, 韩勤锴, 李峥, 等. 风机行星齿轮系统齿轮裂纹故障诊断[J]. 振动、测试与诊断, 2016(1):169-175.

GUI Yong, HAN Qinkai, LI Zheng, et al. The Fault Diagnosis of Cracks in the Planetary Gear System of Wind Turbine[J]. Journal of Vibration,Measurement & Diagnosis, 2016(1):169-175.

[8]YANG B Y, LIU R N, CHEN X F. Fault Diagnosis for Wind Turbine Generator Bearing via Sparse Representation and Shift-invariant K-SVD[J]. IEEE Transactions on Industrial Informatics, 2017,13(3): 1321-1331.

[9]YAZIDI A, CAPOLINO G A, FILIPPETTI F, et al. A New Monitoring System for Wind Turbines with Doubly-fed Induction Generators[C]∥ 2006 IEEE Mediterranean Electrotechnical Conference. Malaga, 2006: 1142-1145

[10]SRENSEN B F, JRGENSEN E, DEBEL C P, et al. Improved Design of Large Wind Turbine Blade of Fibre Composites Based on Studies of Scale Effects (Phase 1): Summary Report[R]. Roskilde: Ris National Laboratory, 2004.

[11]Caithness Windfarms Information Forum. Summary of Wind Turbine Accident Data to 31 March 2019[EB/OL]. Caithness: CWIF, 2019[2019-04-15].http:∥www.caithnesswindfarms.co.uk/AccidentStatistics.htm.

[12]CAWLEY P , ADAMS R D . The Location of Defects in Structures from Measurements of Natural Frequencies[J]. Journal of Strain Analysis, 1979, 14(2):49-57.

[13]WANG Zhiqiang, XU Yuxiu, MEI Yuanying. Damage Diagnosis for Wind Turbine Blades Based on the Shifting Distance of Characteristic Frequency[C]∥ 2nd International Congress on Image and Signal Processing. Tianjin, 2009: 1-3.

[14]ALLEMANG R J, BROWN D L. A Correlation Coefficient for Modal Vector Analysis[C]∥Proceedings of the 1st International Modal Analysis Conference. Orlando, 1982, 1: 110-116.

[15]YANG Zhibo, RADZIENSKI M, KUDELA P, et al. Fourier Spectral-based Modal Curvature Analysis and Its Application to Damage Detection in Beams[J]. Mechanical Systems and Signal Processing, 2017, 84: 763-781.

[16]YANG Zhibo, RADZIENSKI M, KUDELA P, et al. Two-dimensional Modal Curvature Estimation via Fourier Spectral Method for Damage Detection[J]. Composite Structures, 2016, 148: 155-167.

[17]HU Huiwen, WU Chengdu, LU Weijun. Damage Detection of Circular Hollow Cylinder Using Modal Strain Energy and Scanning Damage Index Methods[J]. Computers & structures, 2011, 89(1/2): 149-160.

[18]ZHANG J, LI P J, WU Z S . A New Flexibility-based Damage Index for Structural Damage Detection[J]. Smart Materials and Structures, 2013, 22(2):025037.

[19]张春峰, 文晓艳, 张东生,等. 基于光纤布拉格光栅的复合材料振动性能研究与损伤监测[J]. 玻璃钢/复合材料, 2017(8):15-19.

ZHANG Chunfeng, WEN Xiaoyan, ZHANG Dongsheng, et al. Study on Vibration Performance and Damaging Detection of Composite Materials Based on FBG[J]. Fiber Reinforced Plastics/Composites, 2017(8):15-19.

[20]李蓝天,赵恂.复合材料加筋板多失效模式可靠性分析[J].湖南科技大学学报(自然科学版),2017,32(2):52-57.

LI Lantian, ZHAO Xun. Reliability Analysis of Stiffened Composite Plates with Multiple Failure Modes[J]. Journal of Hunan University of Science & Technology(Natural Science Edition), 2017,32(2):52-57.

[21]PREZ M A, GIL L, OLLER S. Impact Damage Identification in Composite Laminates Using Vibration Testing[J]. Composite Structures, 2014, 108: 267-276.

[22]SHI Z Y, LAW S S, ZHANG L M. Structural Damage Detection from Modal Strain Energy Change[J]. Journal of Engineering Mechanics, 2000, 126(12): 1216-1223.

[23]ZHANG J, MOON F L. A New Impact Testing Method for Efficient Structural Flexibility Identification[J]. Smart Materials and Structures, 2012, 21(5): 055016.

[24]KOO K Y, SUNG S H, JUNG H J. Damage Quantification of Shear Buildings Using Deflections Obtained by Modal Flexibility[J]. Smart Materials and Structures, 2011, 20(4): 045010.

[25]TOMASZEWSKA A. Influence of Statistical Errors on Damage Detection Based on Structural Flexibility and Mode Shape Curvature[J]. Computers &Structures, 2010, 88(3/4): 154-164.

[26]LI Y Y. Hypersensitivity of Strain-based Indicators for Structural Damage Identification: a Review[J]. Mechanical Systems and Signal Processing, 2010, 24(3): 653-664.

[27]ZHANG J, GUO S L, WU Z, et al. Structural Identification and Damage Detection through Long-gauge Strain Measurements[J]. Engineering Structures, 2015,99: 173-183.

[28]LIANG C, SUN F P, ROGERS C A. An Impedance Method for Dynamic Analysis of Active Material Systems[J]. Journal of Vibration and Acoustics, 1994, 116(1): 120-128.

[29]LIANG C, SUN F P, ROGERS C A. Coupled Electro-mechanical Analysis of Adaptive Material Systems-determination of the Actuator Power Consumption and System Energy Transfer[J]. Journal of Intelligent Material Systems and Structures, 1997, 8(4): 335-343.

[30]LIM H J, KIM M K, SOHN H, et al. Impedance Based Damage Detection under Varying Temperature and Loading Conditions[J]. NDT & E International, 2011, 44(8):740-750.

[31]KOO K Y, PARK S, LEE J J , et al. Impedance-based Structural Health Monitoring Considering Temperature Effects[J]. Proceedings of the SPIE, 2007, 6532: 65320C.

[32]PITCHFORD C, GRISSO B L, INMAN D J. Impedance-based Structural Health Monitoring of Wind Turbine Blades[J]. Proceedings of the SPIE, 2007, 6532:65321I.

[33]BAPTISTA F, BUDOYA D, ALMEIDA V, et al. An Experimental Study on the Effect of Temperature on Piezoelectric Sensors for Impedance-based Structural Health Monitoring[J]. Sensors, 2014, 14(1):1208-1227.

[34]SU Zhongqing, YE Lin, LU Ye. Guided Lamb Waves for Identification of Damage in Composite Structures: a Review[J]. Journal of Sound and Vibration. 2006, 295(3/5): 753-780.

[35]ZUO Hao, YANG Zhibo, XU Caibin, et al. Damage Identification for Plate-like Structures Using Ultrasonic Guided Wave Based on Improved MUSIC Method[J]. Composite Structures, 2018, 203: 164-171.

[36]XU Caibin, YANG Zhibo, ZHAI Zhi, et al. A Weighted Sparse Reconstruction-based Ultrasonic Guided Wave Anomaly Imaging Method for Composite Laminates[J]. Composite Structures, 2019, 209: 233-241.

[37]徐冠基，许才彬，杨志勃，等.碳纤维层合板Lamb波损伤检测的加权块稀疏成像法[J].西安交通大学学报，2019，53(6)：176-182.

XU Guanji, XU Caibin, YANG Zhibo, et al. Weighted Group-sparse Imaging Method for Lamb Wave Damage Detection of CFRP Laminates[J]. Journal of Xi'an Jiaotong University, 2019，53(6)：176-182.

[38]GMEZ MUOZ C Q, GARCA MARQUEZ F P, HERNANDEZ CRESPO B, et al. Structural Health Monitoring for Delamination Detection and Location in Wind Turbine Blades Employing Guided Waves[J]. Wind Energy, 2019, 22(5): 698-711.

[39]YANG K, RONGONG J A, WORDEN K. Damage Detection in a Laboratory Wind Turbine Blade Using Techniques of Ultrasonic NDT and SHM[J]. Strain, 2018, 54(6): e12290.

[40]刘增华,曹瑾瑾,吴斌,等. 基于机电阻抗与超声导波综合技术的复合材料板损伤定位[J].北京工业大学学报,2018,44(5):699-707.

LIU Zenghua, CAO Jinjin , WU Bin , et al. Damage Location of Composite Plates Using Integrated Technology Based on Electromechanical Impedance and Ultrasonic Guided Waves[J]. Journal of Beijing University of Technology, 2018, 44(5):699-707.

[41]SHENG S. Gearbox Reliability Collaborative Update: PR-5000-60141[R]. Golden, Colorado: National Renewable Energy Laboratory (NREL), 2013.

[42]GAO Z, CECATI C, DING S X. A Survey of Fault Diagnosis and Fault-tolerant Techniques—Part I: Fault Diagnosis with Model-based and Signal-based Approaches[J]. IEEE Transactions on Industrial Electronics, 2015, 62(6): 3757-3767.

[43]GAO Z, CECATI C, DING S X. A Survey of Fault Diagnosis and Fault-tolerant Techniques—Part II: Fault Diagnosis with Knowledge-based and Hybrid/Active Approaches[J]. IEEE Transactions on Industrial Electronics, 2015, 62(6): 3768-3774.

[44]WANG S, HUANG W, ZHU Z. Transient Modeling and Parameter Identification Based on Wavelet and Correlation Filtering for Rotating Machine Fault Diagnosis[J]. Mechanical Systems and Signal Processing, 2011, 25(4): 1299-1320.

[45]CHEN B Q, ZHANG Z S, ZI Y Y, et al. Detecting of Transient Vibration Signatures Using an Improved Fast Spatial-spectral Ensemble Kurtosis Kurtogram and Its Applications to Mechanical Signature Analysis of Short Duration Data from Rotating Machinery[J]. Mechanical Systems and Signal Processing, 2013, 40(1): 1-37.

[46]WANG Y, XU G, LIANG L, et al. Detection of Weak Transient Signals Based on Wavelet Packet Transform and Manifold Learning for Rolling Element Bearing Fault Diagnosis[J]. Mechanical Systems and Signal Processing, 2015, 54: 259-276.

[47]HE W, ZI Y, CHEN B, et al. Automatic Fault Feature Extraction of Mechanical Anomaly on Induction Motor Bearing Using Ensemble Super-wavelet Transform[J]. Mechanical Systems and Signal Processing, 2015, 54/55: 457-480.

[48]ZHANG C, LI B, CHEN B, et al. Weak Fault Signature Extraction of Rotating Machinery Using Flexible Analytic Wavelet Transform[J]. Mechanical Systems and Signal Processing, 2015, 64/65: 162-187.

[49]QIN Y, XING J, MAO Y. Weak Transient Fault Feature Extraction Based on an Optimized Morlet Wavelet and Kurtosis[J].Measurement Science and Technology, 2016, 27(8): 085003.

[50]HE S, CHEN J, ZHOU Z, et al. Multifractal Entropy Based Adaptive Multiwavelet Construction and Its Application for Mechanical Compound-fault Diagnosis[J].Mechanical Systems and Signal Processing, 2016, 76/77: 742-758.

[51]PAN J, CHEN J, ZI Y, et al. Data-driven Mono-component Feature Identification via Modified Nonlocal Means and MEWT for Mechanical Drivetrain Fault Diagnosis[J]. Mechanical Systems and Signal Processing, 2016, 80: 533-552.

[52]KHAKIPOUR M H, SAFAVI A A, SETOODEH P. Bearing Fault Diagnosis with Morphological Gradient Wavelet[J]. Journal of the Franklin Institute: Engineering and Applied Mathematics, 2017, 354(6): 2465-2476.

[53]LI Y, LIANG X, XU M, et al. Early Fault Feature Extraction of Rolling Bearing Based on ICD and Tunable Q-factor Wavelet Transform[J]. Mechanical Systems and Signal Processing, 2017, 86: 204-223.

[54]WANG D, TSUI K L. Dynamic Bayesian Wavelet Transform: New Methodology for Extraction of Repetitive Transients[J]. Mechanical Systems and Signal Processing, 2017, 88: 137-144.

[55]PENG Z K, CHU F L. Application of the Wavelet Transform in Machine Condition Monitoring and Fault Diagnostics: a Review with Bibliography[J]. Mechanical Systems and Signal Processing, 2004, 18(2): 199-221.

[56]YAN R, Gao R X, CHEN X. Wavelets for Fault Diagnosis of Rotary Machines: a Review with Applications[J]. Signal Processing, 2014, 96: 1-15.

[57]CHEN J, LI Z, PAN J, et al. Wavelet Transform Based on Inner Product in Fault Diagnosis of Rotating Machinery: a Review[J]. Mechanical Systems and Signal Processing, 2016, 70: 1-35.

[58]PENG Z, MENG G, CHU F, et al. Polynomial Chirplet Transform with Application to Instantaneous Frequency Estimation[J]. IEEE Transactions on Instrumentation and Measurement, 2011, 60(9): 3222-3229.

[59]WIGNER E. On the Quantum Correction for Thermodynamic Equilibrium[J]. Physical Review, 1932, 40 (5): 749-759.

[60]DAUBECHIES I, LU J, WU H. Synchrosqueezed Wavelet Transforms: an Empirical Mode Decomposition-like Tool[J]. Applied and Computational Harmonic Analysis, 2011, 30(2): 243-261.

[61]CHUAN L, MING L. Time-Frequency Signal Analysis for Gearbox Fault Diagnosis Using a Generalized Synchrosqueezing Transform[J]. Mechanical Systems and Signal Processing, 2012, 26: 205-217.

[62]OLHEDE S, WALDEN A T. A Generalized Demodulation Approach to Time-Frequency Projections for Multicomponent Signals[J]. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2005, 461(2059): 2159-2179.

[63]WANG S, CHEN X, LI G, et al. Matching Demodulation Transform with Application to Feature Extraction of Rotor Rub-impact Fault[J]. IEEE Transactions on Instrumentation and Measurement, 2014, 63(4): 1372-1383.

[64]GUO Y, CHEN X, WANG S, et al. Wind Turbine Diagnosis under Variable Speed Conditions Using a Single Sensor Based on the Synchrosqueezing Transform Method[J]. Sensors, 2017, 17(5): 1149.

[65]HUANG N E, SHEN Z, LONG S R, et al. The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-stationary Time Series Analysis[J]. Proceedings of the Royal Society Amathematical Physical and Engineering Sciences, 1998, 454(1971): 903-995.

[66]WU Z, HUANG N E. Ensemble Empirical Mode Decomposition: a Noise-assisted Data Analysis Method[J]. Advances in Adaptive Data Analysis, Theory and Applications, 2009, 1(1): 1-41.

[67]HAO H, WANG H L, REHMAN N U. A Joint Framework for Multivariate Signal Denoising Using Multivariate Empirical Mode Decomposition[J]. Signal Processing, 2017, 135: 263-273.

[68]SMITH J S. The Local Mean Decomposition and Its Application to EEG Perception Data[J]. Journal of the Royal Society Interface, 2005, 2(5): 443-454.

[69]DRAGOMIRETSKIY K, ZOSSO D. Variational Mode Decomposition[J]. IEEE Transactionson Signal Processing, 2014, 62(3): 531-544.

[70]LI Z, CHEN J, ZI Y, et al. Independence-oriented VMD to Identify Fault Feature for Wheel Set Bearing Fault Diagnosis of High Speed Locomotive[J]. Mechanical Systems and Signal Processing, 2017, 85: 512-529.

[71]ANTONI J. The Spectral Kurtosis: a Useful Tool for Characterizing Non-stationary Signals[J]. Mechanical Systems and Signal Processing, 2006, 20(2): 282-307.

[72]DYER D, STEWART R M. Detection of Rolling Element Bearing Damage by Statistical Vibration Analysis[J]. Journal of Mechanical Design, 1978, 100(2): 229-235.

[73]ANTONI J. Fast Computation of the Kurtogram for the Detection of Transient Faults[J]. Mechanical Systems and Signal Processing, 2007, 21(1): 108-124.

[74]DONOHO D, TASIG Y, DRORI I, et al. Sparse Solution of Underdetermined Systems of Linear Equation by Stagewise Orthogonal Matching Pursuit[J]. IEEE Transactions on Information Theory, 2012, 58(2): 1094-1121.

[75]WAGNER A, WRIGHT J, GANESH A, et al. Toward a Practical Face Recognition System: Robust Alignment and Illumination by Sparse Representation[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 2012, 34(2): 372-386.

[76]XU Y, ZHU Q, AN Z, et al. From the Idea of “Sparse Representation” to a Representation-based Transformation Method for Feature Extraction[J]. Neurocomputing, 2013, 113: 168-176.

[77]杜朝辉. 结构化稀疏学习诊断理论与特征辨识研究[D]. 西安:西安交通大学，2017.

DU Zhaohui. Structured Sparsity Learning Diagnostic Theory for Feature Recognition[D]. Xi'an: Xi'an Jiaotong University, 2017.

[78]CUI L, WU N, MA C, et al. Quantitative Fault Analysis of Roller Bearings Based on a Novel Matching Pursuit Method with a New Step-impulse Dictionary[J]. Mechanical Systems and Signal Processing, 2016, 68:34-43.

[79]LIU C , WU X , MAO J , et al. Acoustic Emission Signal Processing for Rolling Bearing Running State Assessment Using Compressive Sensing[J]. Mechanical Systems and Signal Processing, 2017, 91:395-406.

[80]SUN R, YANG Z, LUO W, et al. Weighted Sparse Representation Based on Failure Dynamics Simulation for Planetary Gearbox Fault Diagnosis[J]. Measurement Science and Technology, 2019, 30: 045008.

[81]DU Z H, CHEN X F, ZHANG H, et al. Compressed Sensing Based Periodic Impulsive Feature Detection for Wind Turbine Systems[J]. IEEE Transactions on Industrial Informatics, 2017,13(6):2933-2945.

[82]DU Z H, CHEN X F, ZHANG H, et al. Learning Collaborative Sparsity Structure via Nonconvex Optimization for Feature Recognition[J]. IEEE Transactions on Industrial Informatics, 2018, 14(10):4417-4430.

[83]DU Z H, CHEN X F, ZHANG H. Convolutional Sparse Learning for Blind Deconvolution and Application on Impulsive Feature Detection[J]. IEEE Transactions on Instrumentation and Measurement, 2018, 67(2): 338-349.

[84]GUO Y J, ZHAO Z B, SUN R B, et al. Data-driven Multiscale Sparse Representation for Bearing Fault Diagnosis in Wind Turbine[J]. Wind Energy, 2019, 22(4):587-604.

[85]YIN S, DING S X, XIE X, et al. A Review on Basic Data-driven Approaches for Industrial Process Monitoring[J]. IEEE Transactions on Industrial Electronics, 2014, 61(11): 6418-6428.

[86]LEI Y, JIA F, LIN J, et al. An Intelligent Fault Diagnosis Method Using Unsupervised Feature Learning towards Mechanical Big Data[J]. IEEE Transactions on Industrial Electronics, 2016, 63(5): 3137-3147.

[87]张学工. 关于统计学习理论与支持向量机[J]. 自动化学报,2000, 26(1):32-42.

ZHANG Xuegong. Introduction to Statistical Learning Theory and Support Vector Machines[J]. Acta Automatica Sinica, 2000, 26(1):32-42.

[88]SHEN Z J, CHEN X F, ZHANG X L, et al. A Novel Intelligent Gear Fault Diagnosis Model Based on EMD and Multi-class TSVM[J]. Measurement, 2012, 45(1): 30-40.

[89]ZHANG X L, CHEN W, WANG B J, et al. Intelligent Fault Diagnosis of Rotating Machinery Using Support Vector Machine with Ant Colony Algorithm for Synchronous Feature Selection and Parameter Optimization[J]. Neurocomputing, 2015, 167: 260-279.

[90]ZHONG J, TSE P W, WANG D. Novel Bayesian Inference on Optimal Parameters of Support Vector Machines and Its Application to Industrial Survey Data Classification[J]. Neurocomputing, 2016, 211: 159-171.

[91]LIU Z W, GUO W, HU J H, et al. A Hybrid Intelligent Multi-fault Detection Method for Rotating Machinery Based on RSGWPT, KPCA and Twin SVM[J]. ISA Transactions, 2017, 66: 249-261.

[92]ZHENG J D, PAN H Y, CHENG J S. Rolling Bearing Fault Detection and Diagnosis Based on Composite Multiscale Fuzzy Entropy and Ensemble Support Vector Machines[J]. Mechanical Systems and Signal Processing, 2017, 85: 746-759.

[93]JIA F, LEI Y G, LIN J, et al. Deep Neural Networks: a Promising Tool for Fault Characteristic Mining and Intelligent Diagnosis of Rotating Machinery with Massive Data[J]. Mechanical Systems and Signal Processing, 2016, 72/73: 303-315.

[94]JANSSENS O, SLAVKOVIKJ V, VERVISCH B, et al. Convolutional Neural Network Based Fault Detection for Rotating Machinery[J]. Journal of Sound and Vibration, 2016, 377: 331-345.

[95]ABDELJABER O, AVCI O, KIRANYAZ S, et al. Real-time Vibration-based Structural Damage Detection Using One-dimensional Convolutional Neural Networks[J]. Journal of Sound and Vibration, 2017, 388: 154-170.

[96]INCE T, KIRANYAZ S, EREN L, et al. Real-time Motor Fault Detection by 1D Convolutional Neural Networks[J]. IEEE Transactions on Industrial Electronics, 2016, 63(11): 7067-7075.

[97]LU C, WANG Z Y, QIN W L, et al. Fault Diagnosis of Rotary Machinery Components Using a Stacked Denoising Autoencoder-based Health State Identification[J]. Signal Processing, 2017, 130: 377-388.

[98]LIU R N, MENG G T, YANG B Y, et al. Dislocated Time Series Convolutional Neural Architecture: an Intelligent Fault Diagnosis Approach for Electric Machine[J]. IEEE Transactions on Industrial Informatics, 2017, 13(3): 1310-1320.

[99]JING L Y, WANG T Y, ZHAO M, et al. An Adaptive Multi-sensor Data Fusion Method Based on Deep Convolutional Neural Networks for Fault Diagnosis of Planetary Gearbox[J]. Sensors, 2017, 17(2): 414.

[100]李志农, 何永勇, 褚福磊. 基于Wigner高阶谱的机械故障诊断的研究[J]. 机械工程学报, 2005,41(4):123-126.

LI Zhinong, HE Yongyong, CHU Fulei. Research on Mechanical Fault Diagnosis Based on Wigner Higher Order Spectrum [J]. Journal of Mechanical Engineering, 2005,41(4):123-126.

[101]左长青, 韩捷, 陈宏, 等. 矢Wigner高阶谱在齿轮故障诊断中的研究[J]. 机械设计与制造, 2011(10):127-129.

ZUO Changqing, HAN Jie, CHEN Hong, et al. Research on Vector Wigner Higher-order Spectrum in Gear Fault Diagnosis [J]. Machinery Design and Manufacture, 2011(10):127-129.

[102]蔡剑华,胡惟文,王先春. 基于高阶统计量的滚动轴承故障诊断方法[J]. 振动、测试与诊断, 2013，33(2): 298-301.

CAI Jianhua, HU Weiwen, WANG Xianchun. Fault Diagnosis Method of Rolling Bearing Based on High Order Statistics [J]. Journal of Vibration, Measurement and Diagnosis, 2013，33(2): 298-301.

[103]杨江天, 陈家骥, 曾子平. 基于高阶谱的旋转机械故障征兆提取[J]. 振动工程学报, 2001，14(1):17-22.

YANG Jiangtian, CHEN Jiaji,ZENG Ziping. Extracting Fault Features Using Higher Order Spectra for Rotating Machinery [J]. Journal of Vibration Engineering, 2001，14(1):17-22.

[104]POLA L M , JENSEN B B , RITCHIE E , et al. Condition Monitoring of Wind Generators[C]∥ Industry Applications Conference. Salt Lake City, 2003: 1839-1846.

[105]ESTEFANIA A, SOFIA K, ANDRES H, et al. Current Signature and Vibration Analyses to Diagnose an In-service Wind Turbine Drive Train[J]. Energies, 2018,11(5):960.

[106]HOSSAIN M, AHMED A, MUYEEN S. Methods for Advanced Wind Turbine Condition Monitoring and Early Diagnosis: a Literature Review[J].Energies, 2018, 11(5)：1309.

[107]ZHANG P, LU D. A Survey of Condition Monitoring and Fault Diagnosis toward Integrated O&M for Wind Turbines[J].Energies, 2019, 12(14):2801.

[108]WANG L L, ZHAO Y, JIA W, et al. Fault Diagnosis Based on Current Signature Analysis for Stator Winding of Doubly Fed Induction Generator in Wind Turbine[C]∥ Proceedings of 2014 International Symposium on Electrical Insulating Materials. Niigata, 2014: 233-236.

[109]SHAH D, NANDI S, NETI P. Stator-interturn-fault Detection of Doubly Fed Induction Generators Using Rotor-current and Search-coil-voltage Signature Analysis[J]. IEEE Transactions on Industry Applications, 2009,45(5):1831-1842.

[110]ABADI M, CRUZ S, GONCALVES A, et al. Inter-turn Fault Detection in Doubly-Fed Induction Generators for Wind Turbine Applications Using the Stator Reactive Power Analysis[C]∥ 3rd Renewable Power Generation Conference. Naples, 2014:8-29.

[111]ZAPPALA D, SARMA N, DJUROVIC S, et al. Electrical & Mechanical Diagnostic Indicators of Wind Turbine Induction Generator Rotor Faults[J]. Renewable Energy, 2019, 131:14-24.

[112]ESTEFANIA A, ANDRES H, EMILIO G. Current Signature Analysis to Monitor DFIG Wind Turbine Generators: a Case Study[J]. Renewable Energy,2018,116: 5-14.

[113]HASSAN M A, BAYOUMI A M E, SHIN Y J. Quadratic-nonlinearity Index Based on Bicoherence and Its Application in Condition Monitoring of Drive-train Components[J]. IEEE Transactions on Instrumentation and Measurement, 2013, 63(3): 719-728.

[114]SAIDI L, ALI J B, FNAIECH F. Bi-spectrum Based-EMD Applied to the Non-stationary Vibration Signals for Bearing Faults Diagnosis[J]. ISA Transactions, 2014, 53(5): 1650-1660.

[115]GU F, WANG T, ALWODAI A, et al. A New Method of Accurate Broken Rotor Bar Diagnosis Based on Modulation Signal Bispectrum Analysis of Motor Current Signals[J]. Mechanical Systems and Signal Processing, 2015, 50: 400-413.

[116]RIERA-GUASP M, ANTONINO-DAVIU J A, CAPOLINO G A. Advances in Electrical Machine, Power Electronic, and Drive Condition Monitoring and Fault Detection: State of the Art[J]. IEEE Transactions on Industrial Electronics, 2014, 62(3): 1746-1759.

[117]阳熹,杨源.智慧型海上风电场一体化监控系统方案设计[J].南方能源建设, 2019, 6(1):42-48.

YANG Xi, YANG Yuan. Design of Smart Offshore Wind Farm Integration Monitoring System[J]. Southern Energy Construction, 2019, 6(1):42-48.