[1]黄文鹏.节理密集带地质硬岩TBM刀盘损坏形式及对策[J].隧道建设,2012,32(4):587-593.
HANG Wenpeng. Study on Damage of Hard Rock TBM Induced by Tunneling through Joint-densely-developed Hard Rock Section and Countermeasures [J]. Tunnel Construction, 2012, 32(4):587-593.
[2]LING Jingxiu, SUN Wei, HUO Junzhou, et al. Study of TBM Cutterhead Fatigue Crack Propagation Life Based on Multi-degree of Freedom Coupling System Dynamics [J]. Computers & Industrial Engineering, 2015, 83:1-14.
[3]衣振华.疲劳裂纹扩展研究及在装载机横梁寿命估算中的应用[D].济南:山东大学,2011.
YI Zhenhua. Research on Fatigue Crack Propagation and Its Applications in Loader Beam Life [D]. Jinan:Shandong University, 2011.
[4]谢启江, 余海东. 硬岩掘进机刀盘载荷与撑靴接触界面刚度的耦合关系[J]. 上海交通大学学报, 2015, 49(9):1269-1275.
XIE Qijiang, YU Haidong. Coupling Relationship between Loads on Cutterhead of Tunnel Boring Machine and Contact Stiffness of Gripper Shoes and Rocks [J]. Journal of Shanghai Jiaotong University, 2015, 49(9):1269-1275.
[5]韩美东, 曲传咏, 蔡宗熙,等. 刀盘掘进过程动态仿真[J]. 哈尔滨工程大学学报, 2015(8):1098-1102.
HAN Meidong,QU Chuanyong,CAI Zongxi, et al. Dynamic Numerical Simulation of Tunneling by the TBM Cutter Head [J]. Journal of Harbin Engineering University, 2015(8):1098-1102.
[6]夏毅敏, 朱湘衡, 林赉贶,等. TBM刀盘掘进载荷影响因素研究[J]. 现代制造工程, 2015(9):1-6.
XIA Yimin,ZHU Xiangheng,LIN Laikuang, et al. Analysis of Influence Factors on Load of TBM Cutterhead [J]. Modern Manufacturing Engineering, 2015(9):1-6.
[7]霍军周, 史彦军, 滕弘飞,等. 全断面岩石掘进机刀具布置设计方法[J]. 中国机械工程, 2008, 19(15):1832-1836.
HUO Junzhou, SHI Yanjun, TENG Hongfei, et al. Cutter Layout Design of Full-face Rock Tunnel Boring Machine (TBM) [J]. China Mechanical Engineering, 2008, 19(15):1832-1836.
[8]SUN Wei, LING Jingxiu, HUO Junzhou, et al. Dynamic Characteristics Study with Multidegree-of-freedom Coupling in TBM Cutterhead System Based on Complex Factors [J]. Mathematical Problems in Engineering, 2013(3):657-675.
[9]HUO Junzhou, WU Hangyang, YANG Jing, et al. Multi-directional Coupling Dynamic Characteristics Analysis of TBM Cutterhead System Based on Tunnelling Field Test [J]. Journal of Mechanical Science & Technology, 2015, 29(8):3043-3058.
[10]霍军周, 欧阳湘宇, 王亚杰,等. 重载冲击激励下TBM刀盘振动特性的影响因素分析[J]. 哈尔滨工程大学学报, 2015(4):555-559.
HUO Junzhou, OUYANG Xiangyu, WANG Yajie, et al. Analysis of Influencing Factors of Vibration Behaviors of TBM Cutterhead under Heavy Impact Loads [J]. Journal of Harbin Engineering University, 2015(4):555-559.
[11]SUN Wei, LING Jing, HUO Junzhou, et al. Study of TBM Cutterhead Fatigue Damage Mechanisms Based on a Segmented Comprehensive Failure Criterion [J]. Engineering Failure Analysis, 2015, 58:64-82.
[12]LIN X B, SMITH R A. Finite Element Modeling of Fatigue Crack Growth of Surface Cracked Plates—Part I:The Numerical Technique [J]. Engineering Fracture Mechanics, 1999, 63(5):503-522.
[13]NAMI M R. Stress Intensity Factors in a Rotating Impeller Containing Semi-elliptical Surface Crack [J]. Mechanics Based Design of Structures and Machines, 2012, 40(1):1-18.
[14]CHIEW S P, LIE S T, LEE C K, et al. Stress Intensity Factors for a Surface Crack in a Tubular T-joint [J]. International Journal of Pressure Vessels and Piping, 2001, 78(10):677-685. |