面向多向3D打印的混联机构及其运动分析

摘要/Abstract

摘要： 为解决多向3D打印装备瓶颈问题，提出一种完全解耦五自由度混联机构作为3D打印的执行机构，该机构由并联模块3-CPaRR和串联模块RRo组成，其中并联模块由3条相同CPaRR支链构成，可实现空间的三维移动，串联模块RRo用于调整打印头姿态，改善3D打印过程中的台阶现象、干涉问题。基于约束螺旋理论，分析了3CPaRR&RRo机构自由度，并通过ADAMS建模对其进行了验证。然后运用D-H法求得混联机构的运动学方程，对机构的位姿正解表达式求导，得到了机构的雅可比矩阵和末端速度方程，分析了机构在工作空间内的奇异性问题，通过对模型运动仿真，绘制出了机构末端输出速度曲线，验证了上述分析的正确性。

关键词: 多向3D打印, 混联机构, 完全解耦, 螺旋理论, 运动学

Abstract: In order to solve the bottleneck problems of multi 3D printing equipment, a fully-decoupled five degree of freedom (5-DOF) HKM was presented as the actuator of 3D printing. HKM consisted of 3-CPaRR parallel module and RRo serial module, and the parallel module consisted of three identical CPaRR limb chains, it might realize three-dimensional translations, the serial module RRo was used to adjust the print head posture, improve 3D printing process step phenomenon and interference problems. Screw theory was applied to analyze the kinematic characteristics of mechanisms and to calculate the degrees of freedom of 3CPaRR&RRo which were verified via the ADAMS software. The kinematic matrix of the hybrid mechanisms was carried out by using the D-H convention. The expression of the forward kinematics was deduced to obtain the Jacobian matrix and velocity equations, and the analysis of singularity was carried out. Moreover, simulation model was built with ADAMS, the velocities of the end-effectors of mechanisms were drawn. Thus, the validity of the theoretical analyses was proved.

Key words: multi 3D printing, hybrid kinematics mechanism(HKM), fully decoupled, screw theory, kinematics

中图分类号:

TH112

周辉, , 丁锐, , 秦友蕾, , 曹毅, . 面向多向3D打印的混联机构及其运动分析[J]. 中国机械工程.

ZHOU Hui, , DING Rui, , QIN Youlei, , CAO Yi, . Hybrid Kinematics Mechanisms and Its Kinematic Analysis Oriented to Multi 3D Printing[J]. China Mechanical Engineering.

参考文献

[1]GIBSON I, ROSEN D W, STUCKER B. Additive Manufacturing Technologies [M]. New York: Springer, 2010:54-61.
[2]中国机械工程学会. 3D打印，打印未来[M]. 北京：中国科学技术出版社，2013: 20-35.
Chinese Mechanical Engineering Society. 3D Printing, print the future[M]. Beijing: China Science and Technology Press, 2013: 20-35.
[3]ONUH S O, HON K K B. Optimising Build Parameters for Improved Surface Finish in Stereo Lithography[J]. International Journal of Machine Tools & Manufacture, 1998, 38(4):329-342.
[4]JING S K, SONG G H, LIU J H, et al. A Review of Product Design for Additive Manufacturing[J]. Applied Mechanics & Materials, 2014, 635/637:97-100.
[5]PINKERTON A J, WANG W, LI L. Component Repair Using Laser Direct Metal Deposition[J]. Journal of Engineering Manufacture, 2008, 222(7):827-836.
[6]DUTTA B, PALANISWAMY S, CHOI J, et al. Additive Manufacturing by Direct Metal Deposition[J]. Advanced Materials & Processes, 2011, 169(5):33-36.
[7]CHEN Y, ZHOU C, LAO J. A Layerless Additive Manufacturing Process Based on CNC Accumulation[J]. Rapid Prototyping Journal, 2011, 17(3):218-227.
[8]LEE W C, WEI C C, CHUNG S C. Development of a Hybrid Rapid Prototyping System Using Low-cost Fused Deposition Modeling and Five-axis Machining[J]. Journal of Materials Processing Technology, 2014, 214(11): 2366-2374.
[9]CHEN Y，ZHOU C，LAO J. A Layer Less Additive Manufacturing Process Based on CNC Accumulation[J]. Rapid Prototyping Journal，2011，17(3): 218-227.
[10]SONG X，PAN Y，CHEN Y. Development of a Low-cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing[J]. Journal of Manufacturing Science and Engineering，2015，137(2): 297-310.
[11]曹毅, 秦友蕾, 陈海,等. 基于GF集理论的五自由度混联机器人构型综合[J]. 农业机械学报, 2015, 46(11):392-398.
CAO Yi, QIN Youlei, CHEN Hai, et al. Structural Synthesis of 5-DOF Hybrid Mechanisms Based on GF Set[J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(11):392-398.
[12]秦友蕾, 曹毅, 陈海, 等. 两移动三转动完全解耦混联机器人机构型综合[J]. 西安交通大学学报, 2016,50(1):92-99.
QIN Youlei, CAO Yi, CHEN Hai, et al. Structural Synthesis of Fully-decoupled Two-translational and Three-rotational Hybrid Robotic Manipulators[J]. Journal of Xi’an Jiaotong University, 2016,50(1):92-99.
[13]HUANG Z, LIU J F, ZENG D X. A General Methodology for Mobility Analysis of Mechanisms Based on Constraint Screw Theory[J]. Science in China, 2009, 52(5):1337-1347.
[14]赵铁石, 黄真. 欠秩空间并联机器人输入选取的理论与应用[J]. 机械工程学报, 2000, 36(10):81-85.
ZHAO Tieshi, HUANG Zhen. Theory and Application of Selecting Actuating Components of Spatial Parallel Mechanisms[J]. Chinese Journal of Mechanical Engineering, 2000, 36(10):81-85.
[15]于靖军, 刘辛军, 丁希仑. 机器人机构学的数学基础[M]. 北京：机械工业出版社, 2009:82-86.
YU Jingjun, LIU Xinjun, DING Xilun. Mathematic Foundation of Mechanisms and Robotics[M]. Beijing: China Machine Press, 2009:82-86.
[16]李菊，赵德安，沈惠平,等. 多喷枪协同式喷涂五轴混联机器人设计[J]. 农业机械学报，2012，43(4): 216-220.
LI Ju, ZHAO De'an, SHEN Huiping et al. Design of 5-axes Hybrid Robot with Several Spray Guns for Collaborative Spraying[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012，43(4):216-220.