基于TOPSIS法的大型床身优选设计

摘要/Abstract

摘要： 以球形蜗杆砂轮磨齿机的床身为研究对象，设计了不同的床身结构作为备选方案，并建立了各方案参数化模型，对其进行了灵敏度分析和多目标优化计算确定其最优尺寸参数，通过对其进行有限元分析获得了优选决策的初步数据。建立了床身优选评价的TOPSIS数学模型，经计算求解优选出最佳方案。对比分析了优选前后床身的静态和动态性能，验证了床身的优选结果的有效性，完成了球形蜗杆砂轮磨齿机床身的优选设计。

关键词: TOPSIS法, 多目标优化, 优选设计, 灵敏度分析

Abstract: A spherical worm grinding wheel machine bed wasas research object and several bed structures were designed.The parametric models of each alternative were built and their sensitivity analyses were conducted respectively. The optimal dimensions of each alternative were obtained through multi-objective optimization. The preliminary data was obtained for decision making through finite element analysis of each optimized model. TOPSIS mathematical model of the bed was established and the best alternative was determined according to calculation results. The validity of the preference results was verified compared with analysis results of the original bed. The preference task for the bed of spherical worm wheel grinding machine was completed.

Key words: technique for order preference by similarity to an ideal solution(TOPSIS) method, multi-objective optimization, preference design, sensitivity analysis

中图分类号:

TH122

李宇鹏, 孙洪胜, 许亚钢. 基于TOPSIS法的大型床身优选设计[J]. 中国机械工程.

LI Yupeng, SUN Hongsheng, XU Yagang. Preference Design of Large Machine Beds Based on TOPSIS Method[J]. China Mechanical Engineering.

参考文献

[1]TZENG G H, HUANG J J. Multiple Attribute Decision Making：Methods and Applications[M]. Boca Raton:CRC Press, 2011:69-76.
[2]ZDEMIR Z, GEN T. Crackable Connecting Rod Material Selection by Using TOPSIS Method[J]. Journal of Mechanical Engineering and Automation, 2014,4(1):43-48.
[3]LAN T S. Taguchi Optimization of Multi-objective CNC Machining Using TOPSIS[J]. Information Technology Journal, 2009, 8(6):917-922.
[4]陈永亮，韩瑶，庞锦平, 等. 基于相对距离尺度TOPSIS法的机床结构优选设计研究[J]. 中国机械工程，2014,25(3):315-320.
CHEN Yongliang,HAN Yao,PANG Jinping,et al.A New TOPSIS Using Relative Distance Measures for Priority Design of Machine Tool Structures[J].China Mechanical Engineering, 2014,25(3):315-320.
[5]周奇，陈立，许辉, 等. 基于组合赋权TOPSIS法和粒子群的船舶概念优化设计[J]. 舰船科学技术，2014,36(1):62-69.
ZHOU Qi,CHEN Li,XU Hui,et al.Application of Combination Weight TOPSIS Method and Multi -objective Particle Swarm Optimization in Conceptual Ship Design[J].Ship Science and Technology,2014,36(1):62-69.
[6]车乐. 磨削大型硬齿面内齿圈蜗杆砂轮磨齿机的研究设计[D]. 秦皇岛：燕山大学, 2014:10-23.
CHE Le.Research and Design on Spherical Worm Wheel Gear Grinding Machine of Large and Hard Internal Gear[D].Qinhuangdao:Yanshan University,2014:10-23.
[7]满佳, 张连洪, 陈永亮．基于元结构的机床结构可适应优化设计方法[J]．中国机械工程，2010,21(1):51-54.
MAN Jia, ZHANG Lianhong, CHEN Yongliang. An Adaptable Optimization Design Method of Machine Tool Structures Based on Unit Structure[J].China Mechanical Engineering, 2010,21(1):51-54.
[8]现代实用机床设计手册编委会. 现代实用机床设计手册(上册)[M]. 北京：机械工业出版社，2006:1528-1635.
Editorial Board of Practical Design Handbook of ModernMachine Tools. Practical Design Handbook of Modern Machine Tools[M].Beijing:China Machine Press, 2006:1528-1635.
[9]何芙蓉. 层次分析法在施工招投标中的应用研究[D]. 成都：西南交通大学,2014:7-20.
HE Furong. Application of AHP in Construction Bidding[D].Chengdu:Southwest Jiaotong University, 2014:7-20.
[10]陈伟. 关于TOPSIS法应用中的逆序问题及消除的方法[J]. 运筹与管理,2005,14(5):50-54.
CHEN Wei.On the Problem and Elimination of Rank Reversal in the Application of TOPSIS Method[J]. Operations Research and Management Science, 2005,14(5):50-54.

[1]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[2]	翁剑, 庄可佳, 浦栋麟, 丁汉, . 基于机器学习和多目标算法的钛合金插铣优化[J]. 中国机械工程, 2021, 32(07): 771-777.
[3]	倪恒欣, 阎春平, 陈建霖, 侯跃辉, 陈亮. 高速干切滚齿工艺参数的多目标优化与决策方法[J]. 中国机械工程, 2021, 32(07): 832-838.
[4]	刘锋, 李吉泉, 彭翔, 姜少飞. [成形过程仿真优化与集成计算材料工程]限定加热管布局的快速热循环注塑成形模具电加热系统优化[J]. 中国机械工程, 2020, 31(22): 2699-2707.
[5]	焦东风;刘志峰. 低成本低噪声的驱动桥零部件精度优化方法[J]. 中国机械工程, 2020, 31(20): 2505-2511.
[6]	童哲铭1；陈尧1；童水光1；余跃1；李进富2；郝国帅3. 基于NSGA-Ⅲ算法的低比转速离心泵多目标优化设计[J]. 中国机械工程, 2020, 31(18): 2239-2246.
[7]	刘世豪, 林茂. [综述]高速数控转台优化设计方法研究现状与展望[J]. 中国机械工程, 2020, 31(13): 1629-1637.
[8]	陈龙;朱颖;徐力;张高朋. 基于权重灵敏度分析的结构形状等几何优化方法[J]. 中国机械工程, 2020, 31(11): 1306-1314.
[9]	李益兵1,2;黄炜星1;吴锐1. 基于改进人工蜂群算法的多目标绿色柔性作业车间调度研究[J]. 中国机械工程, 2020, 31(11): 1344-1350,1385.
[10]	吕凤鹏;李朝阳;黄健;陈兵奎. RV减速器转臂轴承的优化设计[J]. 中国机械工程, 2020, 31(09): 1043-1048.
[11]	丁晓红;张俊;张横. 三点支撑T形床身机床垫铁位置多目标优化设计[J]. 中国机械工程, 2019, 30(21): 2615-2621.
[12]	应富强;马亮亮;汪内利. 叉车横置油缸式转向机构的设计与优化[J]. 中国机械工程, 2019, 30(19): 2329-2334,2341.
[13]	蔡宁;张则强;张颖;朱立夏. 资源约束下拆卸线平衡问题的建模与改进混合蛙跳算法[J]. 中国机械工程, 2019, 30(17): 2091-2099.
[14]	谢苗;李晓婧. 掘支锚联合机组支撑油缸多目标优化设计[J]. 中国机械工程, 2019, 30(16): 1976-1981.
[15]	罗钜;郭福水. 民用涡扇发动机总体多学科设计优化研究[J]. 中国机械工程, 2019, 30(15): 1813-1820.