2PRS-2PSS并联机构的设计与运动学分析

摘要/Abstract

摘要： 设计出一种两移动两转动的四自由度2PRS-2PSS并联机构。以该机构的4条分支运动链的主动移动副轴线与静平台的夹角为变量。首先根据方位特征集理论分析了该并联机构的运动输出特性；再基于矢量法对其运动学进行分析，推导出机构的位置和姿态的正解、逆解，进而推导出其速度和加速度方程；然后基于机构雅可比矩阵的奇异性，详细讨论了机构可能存在的奇异位形；最后，通过算例仿真验证了理论分析的正确性。

关键词: 并联机构, 自由度, 运动学分析, 奇异性

Abstract: A new two-translational and two-rotational 4-DOF 2PRS-2PSS parallel mechanism was proposed. Orientation angles among axis of all actuated prismatic joints and fixed base of the parallel mechanism were variables. Firstly, the motion output characteristics were analyzed by theory of position and orientation characteristics. The kinematics of the mechanism was analyzed by using vector approach. Forward and inverse solutions of the position and orientation of the mechanism were derived. Then, the equations of velocity and acceleration were obtained. In addition, the singular configurations of the mechanism were discussed in detail based on the singularity of its Jacobian matrices. Finally, simulation results show that the theoretic analysis is correct.

Key words: parallel mechanism, degree of freedom(DOF), kinematics analysis, singularity

中图分类号:

TH112
TP242

张彦斌, 丁丁, 吴鑫, 王增辉, 赵浥夫. 2PRS-2PSS并联机构的设计与运动学分析[J]. 中国机械工程.

Zhang Yanbin, Ding Ding, Wu Xin, Wang Zenghui, Zhao Yifu. Design and Kinematics Analysis of a 2PRS-2PSS Parallel Mechanism[J]. China Mechanical Engineering.

参考文献

[1]边辉, 刘艳辉, 梁志成, 等. 并联2-RRR/UPRR踝关节康复机器人机构及其运动学[J]. 机器人, 2010(1):6-12.

Bian Hui, Liu Yanhui, Liang Zhicheng, et al. A Novel 2-RRR/UPRR Robot Mechanism for Ankle Rehabilitation and Its Kinematics[J]. Robot, 2010 (1): 6-12.

[2]Richard P L, Gosselin C M, Kong X. Kinematic Analysis and Prototyping of a Partially Decoupled 4-DOF 3T1R Parallel Manipulator[J]. Journal of Mechanical Design, 2007, 129(6): 611-616.

[3]窦玉超, 曾达幸, 李明洋, 等. 一种两转一移完全解耦并联机器人机构及其特性分析[J]. 中国机械工程, 2014, 25(2): 241-245.

Dou Yuchao, Zeng Daxing, Li Mingyang, et al. Analysis of a 2T1R Fully Decoupled Parallel Robot Mechanism and Its Characteristics[J]. China Mechanical Engineering, 2014, 25(2): 241-245.

[4]Gan D, Dai J S, Dias J, et al. Singularity-free Workspace Aimed Optimal Design of a 2T2R Parallel Mechanism for Automated Fiber Placement[J]. Journal of Mechanisms and Robotics, 2015, 7(4): 041022.

[5]Clavel R. DELTA, a Fast Robot with Parallel Geometry[C]//Proc. of the 18th International Symposium on Industrial Robots. New York, 1988:91-100.

[6]Gao F, Peng B, Zhao H, et al. A Novel 5-DOF Fully Parallel Kinematic Machine Tool[J]. The International Journal of Advanced Manufacturing Technology, 2006, 31(1/2): 201-207.

[7]Pierrot F, Company O. H4: A New Family of 4-dof Parallel Robots[C]//Proceeding of IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Atlanta, 1999: 508-513.

[8]Song Y, Gao H, Sun T, et al. Kinematic Analysis and Optimal Design of a Novel 1T3R Parallel Manipulator with an Articulated Travelling Plate[J]. Robotics and Computer-Integrated Manufacturing, 2014, 30(5): 508-516.

[9]李永刚宋轶民, 冯志友, 等. 4自由度非全对称并联机构的完整雅可比矩阵[J]. 机械工程学报, 2007, 43(6): 37-40.

Li Yonggang, Song Yimin, Feng Zhiyou, et al. Complete Jacbian Matrix of a Class of Incompletely Symmetrical Parallel Mechanisms with 4-DOF[J]. Journal of Mechanical Engineering, 2007, 43(6): 37-40.

[10]Wang S. The Singularity Research of a Novel 2T2R Parallel Mechanism[C]//The Second International Conference on Mechanic Automation and Control Engineering. Hohhot, 2011: 866-869.

[11]马履中, 陈修祥, 杨启志, 等. 基于并联机构的具有冗余自由度四自由度弹性阻尼减振装置研究[J]. 中国机械工程, 2006, 17(17): 1761-1764.

Ma Lüzhong, Chen Xiuxiang, Yang Qizhi, et al. Research on 4-DOF Parallel Mechanism-Based Vibration Damping Device with Redundant Freedom[J]. China Mechanical Engineering, 2006, 17(17): 1761-1764.

[12]刘剑敏, 马履中, 许子红, 等. 振动筛两平移两转动并联机构的运动学分析[J]. 农业机械学报, 2008, 39(2): 14-17.

Liu Jianmin, Ma Lüzhong, Xu Zihong, et al. Kinematical Analysis of Vibrating Screen on a Kind of 2T-2R Parallel Mechanism[J]. Transactions of the Chinese Society for Agricultural Machinery, 2008, 39(2): 14-17.

[13]Kumar N, Piccin O, Bayle B. Dimensional Synthesis of a Novel 2T2R Parallel Manipulator for Medical Applications[C]//ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. New York, 2014: V05AT08A069.

[14]范彩霞, 刘宏昭, 张彦斌. 基于构型演变和李群理论的2T2R型四自由度并联机构型综合[J]. 中国机械工程, 2010, 21(9): 1101-1105.

Fan Caixia, Liu Hongzhao, Zhang Yanbin. Type Synthesis of 2T2R 4-DOF Parallel Mechanism Based on Configuration Evolution and Lie Group Theory[J]. China Mechanical Engineering, 2010, 21(9): 1101-1105.

[15]杨廷力. 机器人机构拓扑结构设计[M]. 北京: 科学出版社, 2012.