[1]唐荻,米振莉,苏岚.汽车板深加工技术发展趋势[J].轧钢,2015,32(1) :1-6.
Tang Di,Mi Zhenli,Su Lan. Trend of Development in Automobile Sheet Deep Working Technology[J]. Steel Rolling,2015,32(1):1-6.
[2]刘毅,秦国鹏,陈水荣.弯型钢建筑体系的发展与应用现状[J]. 钢结构,2013,28(9):1-3.
Liu Yi,Qin Guopeng,Chen Shuirong.The Development and Application of Cold-formed Steel Building System [J]. Steel Construction,2013,28(9):1-3.
[3]Wiebenga J H,Weiss M,Rolfe B,et al.Product Defect Compensation by Robust Optimization of a Cold Roll Forming Process[J]. Journal of Materials Processing Technology,2013,213(6):978-986.
[4]Groche P,Henkelmann M,Goetz P,et al.Cold Rolled Profiles for Vehicle Construction[J]. Archives of Civil and Mechanical Engineering,2008,8(2):31-38.
[5]韩飞,刘继英,艾正青,等.辊弯成型技术理论及应用研究现状[J].塑性工程学报,2010,17(5):53-60.
Han Fei,Liu Jiying,Ai Zhengqing,et al. State of the Art of Research on Roll Forming Process[J]. Journal of Plasticity Engineering,2010,17(5):53-60.
[6]Farahmand H R,Abrinia K.An Upper Bound Analysis for Reshaping Thick Tubes to Polygonal Cross-section Tubes through Multistage Roll Forming Process[J]. International Journal of Mechanical Sciences,2015,100:90-98.
[7]Lindgren M. Cold Roll Forming of a U-channel Made of High Strength Steel[J]. Journal of Materials Processing Technology,2007,186:77-81.
[8]Mohammad M K,Hassan M N,Behnam A,et al.Flange Wrinkling in Flexible Roll Forming Process[J]. Procedia Engineering,2014,81:245-250.
[9]Barbara R,Herve D,Romain B.Numerical Simula-tion of the Roll Forming of Thin-walled Sections and Evaluation of Corner Strength Enhancement[J]. Finite Elements in Analysis and Design,2013,72:13-20.
[10]韩非,石磊,刘继英,等.应用先进高强钢的典型汽车零件辊压成形关键技术及开发[J].塑性工程学报,2013,20(3):65-69.
Han Fei,Shi Lei,Liu Jiying,et al.Development and Key Technologies on Roll-formed Automobile Profiles with AHSS[J]. Journal of Plasticity Engineering,2013,20(3):65-69.
[11]李茜,韩飞,杨河.成形工艺对冷弯方管残余应力及焊接微观组织的影响[J].钢铁研究学报,2014,26(1): 37-42.
Li Qian,Han Fei,Yang He.Effect of Forming Processes on Residual Stresses and Weld Microstructure of Roll-formed Square Tube[J]. Journal of Iron and Steel Research,2014,26(1):37-42.
[12]Laila S B,Ahmed S A. Determination of the Forming Tool Load in Plastic Shaping of a Round Tube into a Square Tubular Section[J]. Journal of Materials Processing Technology,2009,209:1835-1842.
[13]Leu Daw-Kwei.The Shaping of a Circular Tube into a Symmetric Square-tube by Finite-element Modeling[J]. Journal of Materials Processing Technology,2006,178:287-296.
[14]Huang Yuung-ming. Elasto-plastic Finite Element Analysis of Squaring Circular Tube[J]. Transac-tions of Nonferrous Metals Society of China,2008,18(3):665-673.
|