基于SAFT的单晶硅内部缺陷时域检测成像方法

摘要/Abstract

摘要：

为了提高单晶硅内部缺陷的测量精确度和空间分辨率，针对单晶硅材料提出了合成孔径聚焦技术直接时域重建的方法，将多个A超扫描测量结果连续叠加，合并样本点的相位信息,根据TOF算法实现数据映射和同相求和。基于6 dB-drop的概念，提出了可描述缺陷边界特征的测量方法，进而推测缺陷的范围、位置、形状及特征，为单晶硅切片工序的计算提供更多信息。流时域重建方法可用于处理实验数据，进而描绘缺陷的特征，简单有效地提高空间分辨率。实验结果表明，该方法可清楚辨别出两个间隔小且直径为0.8mm的孔洞，且天然缺陷的尺寸和方位的量化非常接近于实际测量出的切割试样。

关键词: 合成孔径聚焦技术, 无损检测, 缺陷尺寸, 时域, SAFT成像

Abstract: A direct time-domain reconstruction and sizing method of SAFT was developed to improve the spatial resolution and sizing accuracy of monocrystalline silicon internal defects. The basic idea of the reconstruction algorithm was to coherently superimpose multiple A-scan measurements, incorporating the phase information of the sampling points. The algorithm involved data mapping and in-phase summation according to time-of-flight (TOF). A sizing method was proposed to characterize the flaw boundary based on the concept of 6 dB-drop. The extents, orientation and the shape of the flaw might then be inferred to provide more informations for monocrystalline silicon slicing process technology. The developed method was used to process the experimental data to characterize the flaws. Using the developed method, the improvement of spatial resolution was observed. Results indicate that two closely spaced 0.8mm-diameter holes are clearly identified, and the quantification of size and orientation of the natural flaw are very close to the actual measurements after cutting the testing piece apart.

Key words: synthetic aperture focusing technique technigue(SAFT), nondestructive testing(NDT), flaw size, time-domain, SATF imaging

中图分类号:

TM930.1

乌伟, 邱宗明, 黄秋红. 基于SAFT的单晶硅内部缺陷时域检测成像方法[J]. 中国机械工程.

Wu Wei, Qiu Zongming, Huang Qiuhong. Imaging Method of Monocrystalline Silicon Internal Defects Based on SAFT Time-domain Detection[J]. China Mechanical Engineering.

参考文献

[1]Poguet J, Marguet J, Pichonnat F,et al.Phased Array Technology:Concepts, Probes and Applications[J].J. Nondestruct. Test. Ultrason., 2002,7(5):1-6.

[2]Nagy P B. Fatigue Damage Assessment by Nonli-near Ultrasonic Materials Characterization[J]. Ultrasonics, 1998,36(1):375-381.

[3]陈广东，孙红梅，陈智.一种基于合成孔径聚焦图像的目标测距法[J].南京航空航天大学学报,2014,46（4）:573-579.

Chen Guangdong,Sun Hongmei,Chen Zhi.Target Distance Measurement Based on Synthetic Aperture Focusing Image[J].Journal of Nanjing University of Aeronautics&Astronautics,2014,46(4):573-579.

[4]关迪，孙秦，杨锋平.一个修正的金属材料低周疲劳损伤模型[J].固体力学学报，2013,34（6）:571-578.

Guan Di,Sun Qin,Yang Fengping.A Modified Low Cycle Fetigue Damage Model for Metals[J].Chinese Journal of Solid Mechanics,2013,34（6）:571-578.

[5]谢从珍，袁超，何子兰，等.复合绝缘子典型内部缺陷的相控阵检测[J].高电压技术,2014,40（3）:837-842.

Xie Congzhen,Yuan Chao,He Zilan,et al.Ultrasonic Phased Array to Inspect Typical Internal Defects of Composite Insulators[J].High Voltage Engineering,2014,40(3):837-842.

[6]Li Menglin, Guan Weijung, Li Paichi.Improved Synthetic Aperture Focusing Technique with Applications in High-frequency Ultrasound Imaging[J].IEEE Trans. Ultrason. Ferroelectr. Freq. Control,2004,51(1):63-70.

[7]Prine D.Synthetic Aperture Ultrasonic Imaging[J].Proceedings of the Engineering Applications of Holography Symposium,1972, 287：102-107.

[8]Burckhardt C, Grandchamp P, Hoffman H.Methods for Increasing the Lateral Resolution of B-scan[M].New York: Plenum Publishing Company Limited, 1974.

[9]Thomson R.Transverse and Longitudinal Resolution of the Synthetic Aperture Focusing Technique[J]. Ultrasonics, 1984, 22(1):9-15.

[10]Spies M, Jager W.Synthetic Aperture Focusing for Defect Reconstruction in Anisotropic Media[J].Ultrasonics, 2003,41 (2):125-131.

[11]Pignone E. Enhancement in Image Quality in Ultrasonic Flaw Detection Process in Rotor Turbine Using SAFT[C]//IEEE International Conference on Imaging Systems and Techniques. Thera, 2004:117-122.

[12]Brekow G, Brackrock D, Boehm R,et al.Phased Array-based SAFT for Defect Sizing on Power Plant Components[J].Review of Progress in Quantitative Nondestructive, 2009, 1096(1):872-879.

[13]Spies M, Rieder H.Synthetic Aperture Focusing of Ultrasonic Inspection Data to Enhance the Probability of Detection of Defects in Strongly Attenuating Materials[J].NDT & E Int., 2010,43 (5):425-431.

[14]Boehm R, Brackrock D, Kitze J,et al.Advanced Crack Shape Analysis Using SAFT[J]. AIP Conference, 2010, 1211(1):814-821.

[15]Zhang J, Drinkwater B W, Wilcox P D.Defect Ch-aracterization Using an Ultrasonic Array to Measure the Scattering Coefficient Matrix[J].IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 2008,55(10):2254-2265.

[16]Prager J, Kitze J,Acheroy C, et al.SAFT and TO-FD-a Comparative Study of Two Defect Sizing Techniques on a Reactor Pressure Vessel Mock-up[J].J. Nondestr. Eval., 2013,32(1):1-13.

[17]常俊杰.3D合成孔径超声波探伤仪的开发及应用[C]//第十届全国无损检测学术年会.南昌,2014:231-236.