隐式功能函数结构体可靠性拓扑优化

摘要/Abstract

摘要：

考虑工程实际中外载荷、材料属性等的随机不确定性对结构安全性的影响，研究了具有结构位移可靠性约束的拓扑优化设计。建立以柔度最小为目标、以单元相对密度为变量、具有材料体积分数约束和结构位移可靠性约束的拓扑优化数学模型；针对运用有限元数值计算方法时结构功能函数为隐式的情况，运用响应面法近似逼近结构真实的功能函数；利用简便高效的一次二阶矩法计算结构位移可靠度;采用内循环为确定性的拓扑优化、外循环控制结构材料体积分数的策略对连续体结构进行可靠性拓扑优化设计。通过两个算例与确定性拓扑优化结果进行比较,结果表明所提设计方法是高效可行的。

关键词: 可靠性, 拓扑优化, 隐式功能函数, 响应面法

Abstract:

Considering the impacts of uncertain factors such as external loading,material property etc. on structural safety in engineering practice,the topology optimization design with the structural displacement reliability constrain was discussed.A mathematical of topology optimization was developed,where the minimization of compliance was taken as objective function,the relative densities of elements were taken as design variables,the material volume fraction and structural displacement reliability were taken as constraints. The response surface method was implemented to approximately approach its real performance function, for the situation that the structural performance function was implicit by using finite element numerical method.Then,the simple and efficient first order second moment method was used to obtain the structural displacement reliability.The strategy that inner loop was the deterministic topology optimization and the outer loop was to control the material volume fraction was implemented to carry out the reliability-based topology optimization of continuum structure.Finally,two numerical examples were given to be compared with the results of deterministic topology optimization showing that the design method is efficient and feasible.

Key words: reliability;topology , optimization;implicit , performance function;response surface method

中图分类号:

TB114
H122

吴劲松, 周金宇. 隐式功能函数结构体可靠性拓扑优化[J]. 中国机械工程, 2015, 26(16): 2203-2208.

Wu Jinsong, Zhou Jinyu. Reliability-based Topology Optimization of Implicit Performance Function Structure[J]. China Mechanical Engineering, 2015, 26(16): 2203-2208.

参考文献

[1]Bendsoe M P，Kikuchi N.Generating Optimal Topologies in Structural Design Using a Homogenization Method[J].Computer Methods in Applied Mechanics and Engineering,1988,71(1):197-224．
[2]Bendsoe M P,Sigmund O.Material Interpolation Schemes in Topology Optimization[J].Archive of Applied Mechanics, 1999, 69(9): 635-654．
[3]Xie Y M,Steven G P.A Simple Evolutionary Procedure for Structural Optimization[J].Computers and Structures,1993,49(5):885-896．
[4]Querin O M,Yong V,Steven G P,et al.Computational Efficiency and Validation of Bi-directional Evolutionary Structural Optimization[J]. Computer Methods in Applied Mechanics and Engineering,2001,189(2)：559-573．
[5]Sethian J A,Wiegmann A.Structural Boundary Design via Level Set and Immersed Interface Methods[J].Journal for Numerical Method in Engineering,2003,57(8):1177-1196．
[6]刘国梁,陈建军,马洪波.一种基于非概率可靠性的结构水平集拓扑优化[J].工程力学,2012,29(6)：58-62．
Liu Guoliang,Chen Jianjun,Ma Hongbo.Structural Topology Optimization for Non-probability Reliability in Level Set Method[J]. Engineering Mechanics,2012,29(6):58-62.
[7]Kharmanda G,Olhohoff N,Mohamed A,et al.Reliability-based Topology Optimization[J].Structural and Multidisciplinary Optimization, 2004,26(5)：295-307．
[8]邝泳聪，欧阳高飞，张宪民．基于可靠性的连续体结构拓扑优化设计[J]．机械强度，2009，31 (4)：604-608．
Kuang Yongcong,Ouyang Gaofei,Zhang Xianmin.Structural Topology Optimization of Continuous Structures Based on Reliability[J]. Journal of Mechanical Strength,2009,31(4):604-608.
[9]Kwang S Y,Eom Y S,Park J Y,et al.Reliability-based Topology Optimization Using Successive Standard Response Surface Method[J]. Finite Element in Analysis and Design,2011,47(7):843-849.
[10]Kwang S Y,Yong S E,Jae Y P,et al.Reliability-based Topology Optimization Using a Standard Response Surface Method for Three-dimensional Structures[J].Structural and Multidisciplinary Optimization,2011,43(2):287-295．
[11]李景奎，张义民．正态分布连续体结构可靠性拓扑优化设计[J].东北大学学报,2011,32(9):1303-1309．
Li Jingkui,Zhang Yimin.Reliability-based Topology Optimization Design of Normal Distribution Continuum Structure[J]. Journal of Northeaster University,2011,32(9):1303-1309．
[12]李景奎,张义民.非正态分布连续体结构可靠性拓扑优化设计[J].机械工程学报,2012,48(3):153-158,
Li Jingkui,Zhang Yimin.The Reliability-based Topology Optimization Design of Continuum Structure with Abnormal Distribution[J]. Journal of Mechanical Engineering,2012,48(3):153-158．
[13]李好.基于变密度法的连续体结构拓扑优化方法研究[D].武汉:华中科技大学,2011.
[14]Chwail K,Semyung W.Reliability-based Topology Optimization with Uncertainties[J].Journal of Mechanical Science and Technology, 2006,20(4):494-504．
[15]Maute K,Frangopol D M.Reliability-based Design of MEMS Mechanisms by Topology Optimization[J].Computers and Structures, 2003,81(8):813-824．
[16]Seung J H,Seonho C.Reliability-based Topology Optimization of Geometrically Nonlinear Structures with Loading and Material Uncertainties[J].Finite Elements in Analysis and Design,2004,41(3):311-331．
[17]Zhang Bin,Wang X J,Sun X Y.Structural Topology Optimization Considering Stress and Reliability Constraints[J].Metalurgia International,2014,ⅪⅩ(2):59-63．