数控机床热误差特性分析

中国机械工程 ›› 2015, Vol. 26 ›› Issue (8): 1078-1084.

数控机床热误差特性分析

苗恩铭;高增汉;党连春;苗继超

合肥工业大学,合肥,230009

出版日期:2015-04-25 发布日期:2015-09-10
基金资助:
国家自然科学基金资助重大项目（51490660，51490661）；国家自然科学基金资助项目(51175142)；安徽省科技专项(2013AKKG0393)

Thermal Error Characteristics Analysis of CNC Machine Tools

Miao Enming;Gao Zenghan;Dang Lianchun;Miao Jichao

Hefei University of Technology,Hefei,230009

Online:2015-04-25 Published:2015-09-10
Supported by:
National Natural Science Foundation of China（No. 51490660，51490661, 51175142）;Anhui Provincial Science and Technology Project ( No. 2013AKKG0393)

摘要/Abstract

摘要：

对数控机床在主轴空转和实切状态下的热误差特性进行了比对分析。利用模糊聚类和F统计量确定了最佳的分类及分类阈值,根据温度与热误差之间的灰色关联度确定出温度敏感点,进而建立补偿模型。对实验结果的分析表明，温度敏感点在两种状态下是动态变化的，不同状态下的补偿模型并不通用;实际生产中的热误差补偿应优选实切状态下的热误差模型。

关键词: 数控机床, 热误差, 温度敏感点, 实际切削

Abstract:

Thermal errors of CNC machines were different under actual cutting and spindle idling. The methods of fuzzy clustering and F statistics were used to classify temperature variables,as well as to confirm the best threshold. Then the temperature sensitive points were selected according to grey correlation among temperature variables and thermal errors. At last, a model among temperature sensitive points and thermal errors was built. The results show that temperature sensitive points will be changed under two situations, the model under different situations can not be used mutually-interchanging. The model under actual cutting should be used.

Key words: prior during actual production CNC machine tool;thermal error;temperature-sensitive , point;actual cutting

中图分类号:

苗恩铭, 高增汉, 党连春, 苗继超. 数控机床热误差特性分析[J]. 中国机械工程, 2015, 26(8): 1078-1084.

Miao Enming, Gao Zenghan, Dang Lianchun, Miao Jichao. Thermal Error Characteristics Analysis of CNC Machine Tools[J]. China Mechanical Engineering, 2015, 26(8): 1078-1084.

参考文献

[1]ISO.IS0230-3:2001 Test Code for Machine Tools-Part 3:Determination of Thermal Effects[S].Switzerland:TC 39,2001.
[2]Bryan J.International Status of Thermal Error Research[J].ANN CIRP,1990,39(2):645-656.
[3]Aronson R B.War Against Thermal Expansion[J].Manufacturing Engineering,1996,116(6):45-50.
[4]Miao Enming,Gong Yayun,NiuPengcheng,et al.Robustness of Thermal Error Compensation Modeling Models of CNC Machine Tools[J]. International Journal of Manufacturing Technology,2013，69(9)：2593-2603.
[5]倪军.数控机床误差补偿研究的回顾及展望[J].中国机械工程,1997,8(1):29-33.
Ni Jun.Review and Forecast for Thermal Errors Compensation of Machine Tools[J].China Mechanical Engineering,1997,8(1):29-33.
[6]Miao Enming，NiuPengcheng，FeiYetai，et al.Selecting Temperature-sensitive Points and Modeling Thermal Errors of Machine Tools[J]. Journal of the Chinese Society of Mechanical Engineers，2011，32(6)：559-565.
[7]Yang Hong，Ni J. Dynamic Neural Network Modeling for Nonlinear，NonstationaryMachine Tool Thermally Induced Error[J]. International Journal of Manufacturing Technology，2005，45(4)：455-465.
[8]杨建国，邓卫国，任永强，等. 机床热补偿中温度变量分组优化建模[J]. 中国机械工程，2004，15(6)：478-481.
Yang Jianguo，Deng Weiguo，Ren Yongqiang，et al. Grouping Optimization Modeling by Selection of Temperature Variables for the Thermal Error Compensation on Machine Tools[J]. China Mechanical Engineering，2004，15(6)：478-481.
[9]Kim S K,Cho D W.Real-time Estimation of Temperature Distribution in a Ball-screw System[J]. International Journal of Manufacturing Technology，1997，37(4)：451-464.
[10]Chen Cheng,Zhang Chenyang,Chen Hong.Selection and Modeling of Temperature Variables for the Thermal Error Compensation in Servo System[C]//The Tenth International Conference on Electronic Measurement & Instruments. Chengdu, China, 2011：220-223.
[11]Yang S,Yuan J,Ni J.The Improvement of Thermal Error Modeling and Compensation on Machine Tools by CMAC Neural Network[J]. International Journal of Manufacturing Technology,1996,36(4):527-534.
[12]苗恩铭，龚亚运，成天驹，等. 支持向量回归机在数控加工中心热误差建模中的应用[J]. 光学精密工程,2013,21(4)：980-986.
Miao Enming，Gong Yayun，Cheng Tianju，et al. Application of Support Vector Regression to Thermal Error Modeling of Machine Tools[J]. Optics and Precision Engineering，2013，21(4)：980-986.
[13]张伟,叶文华.基于灰色关联和模糊聚类的机床温度测点优化[J].中国机械工程,2014,25(4):456-460.
Zhang Wei,Ye Wenhua.Optimization of Temperature Measuring Points for Machine Tools Based on Grey Correlation and Fuzzy Clustering Analysis[J].China Mechanical Engineering,2014,25(4):456-460.
[14]杨纶标,高英仪.模糊数学原理及应用[M].3版.广州:华南理工大学出版社,2004.

[1]	刘强, . 数控机床发展历程及未来趋势[J]. 中国机械工程, 2021, 32(07): 757-770.
[2]	桂林;李升. 国内重型数控机床的现状及发展趋势[J]. 中国机械工程, 2020, 31(23): 2780-2787,2797.
[3]	张朝阳;吉卫喜;彭威. 基于迁移学习的数控机床节能控制决策方法[J]. 中国机械工程, 2020, 31(23): 2855-2863.
[4]	付国强, 饶勇建, 谢云鹏, 高宏力, 邓小雷. [误差建模及精度保证方法]几何误差贡献值影响下五轴数控机床运动轴误差灵敏度分析方法[J]. 中国机械工程, 2020, 31(13): 1518-1528.
[5]	黄智, 刘永超, 邓涛, 周涛, 祝云. [误差建模及精度保证方法]一种五轴数控机床热误差建模方法[J]. 中国机械工程, 2020, 31(13): 1529-1538.
[6]	刘红艺, 樊锐, 郭江真, 张维, 赵钦志, 陈五一. [可靠性建模及试验技术]面向数控机床可靠性试验的多维力随动加载装置[J]. 中国机械工程, 2020, 31(13): 1606-1612.
[7]	杨斌, 冉琰, 张根保. [可靠性建模及试验技术]基于元动作模块的多轴数控机床精度分析[J]. 中国机械工程, 2020, 31(13): 1621-1628.
[8]	刘敏洋1，2;黄艳群1;张大卫1. 基于绩效激励机制的数控机床人机交互系统创新设计[J]. 中国机械工程, 2019, 30(21): 2554-2559.
[9]	张根保;王扬. 基于元动作链理论的数控机床故障分析[J]. 中国机械工程, 2019, 30(16): 1950-1958,1966.
[10]	苗恩铭1;吕玄玄2;魏新园2;宋先进2;董云飞2. 基于状态空间模型的数控机床热误差建模[J]. 中国机械工程, 2019, 30(09): 1049-1055,1064.
[11]	王宇钢1;修世超2. 基于聚类和自适应神经模糊推理系统的数控机床绿色度评价方法[J]. 中国机械工程, 2018, 29(23): 2845-2849,2858.
[12]	王超;刘飞;庹军波. 一种数控切削机床运行能耗状态在线判别方法[J]. 中国机械工程, 2017, 28(13): 1620-1627.
[13]	苗恩铭, 徐建国, 吕玄玄, 魏新园. 数控机床工作台误差综合补偿方法研究[J]. 中国机械工程, 2017, 28(11): 1326-1332.
[14]	陈光胜, 郑庆振. 一种多轴数控机床末端静刚度快速辨识方法[J]. 中国机械工程, 2017, 28(03): 322-326.
[15]	宋智勇, 李晴朝, 姜忠, 康文俊, 杜丽, 王伟. CNC机床动态特性与S形试件轮廓误差映射关系分析[J]. 中国机械工程, 2016, 27(23): 3157-3161,3166.