[1]季远,李勋,张德远.超声椭圆振动精密切削[J].航空制造技术,2005(4):92-95.
Ji Yuan, Li Xun, Zhang Deyuan.Ultrasonic Elliptical Vibration Cutting Precision[J].Aviation Manufacturing Technology , 2005(4):92-95.
[2]马春翔,胡德金.超声波椭圆振动切削技术[J].机械工程学报,2003,39(12):67-70.
Ma Chunxiang, Hu Dejin.Ultrasonic Elliptical Vibration Cutting[J].Chinese Journal of Mechanical Engineering, 2003,39(12):67-70.
[3]陈明方,邹平,于泽旭,等.功率型椭圆超声振动切削机构的研究[J].机械设计与制造,2014(3):8-11.
Chen Mingfang, Zou Ping,Yu Zexu,et al.Study on the Cutting Mechanism of Power Type Elliptic Ultrasonic Vibration[J]. Machinery Design & Manufacture, 2014(3):8-11.
[4]赵亮,祝锡晶,陆志猛.功率超声车削加工装置的设计与仿真分析[J].机械设计与制造,2010(12):20-22.
Zhao Liang, Zhu Xijing, Lu Zhimeng.The Design of Power Ultrasonic Vibration Device for Turning and Simulation Analysis[J]. Machinery Design & Manufacture, 2010(12):20-22.
[5]马春翔,社本英二.超声波椭圆振动切削提高加工系统稳定性的研究[J].兵工学报,2004,25(6):752-756.
Ma Chunxiang,Shamoto E. Ultrasonic Elliptical Vibration Cutting to Improve the Study of Stability of the Maching System[J]. Journal of Armaments Factories, 2004, 25(6):752-756.
[6]陈明方,邹平,韩钢,等. 数控辅助超精密定位工作平台的研究[J].东北大学学报(自然科学版),2013, 34 (6): 875-879.
Chen Mingfang, Zou Ping, Hang Gang,et al.Study on Ultra Precision CNC Auxiliary Working Platform[J]. Journal of Northeastern University (Natural Science),2013, 34(6): 875-879.
[7]陶继增,王中宇,李程.压电叠堆在正弦电压激励下振动位移特性的研究[J].计测技术,2006(6):20-23.
Tao Jizeng, Wang Zhongyu, Li Cheng.Research on Vibration Displacement Characteristic of Piezoelectric Ceramics under Sine Voltage Excitation[J].Metrology & Measurement Technology, 2006(6):20-23.
[8]Zhao Yibo, Luo Xiaoshu, Fang Jinqing.Study on Stability of the Voltage-mode DC-DC Converters[J].Annual Report of China Institute of Atomic Energy, 2004(1):84-87.
[9]欧阳长莲,严仰光,章国宝.同步整流BUCK变换器断续工作模式建模分析[J].电工技术学报,2002,17(6):53-58.
Ouyang Changlian,Yan Yangguang, Zhang Guobao. Modeling Analysis of Synchronous Rectifier BUCK Converter in DCM[J]. Journal of Electrotechnics, 2002,17(6):53-58.
[10]刘树林,钟久明,刘健.BUCK-Boost变换器的最小电感和电容设计考虑[C]//2011中国电工技术学会学术年会论文集. 北京, 2011: 716-721.
[11]付园园,姚素英,徐江涛,等.BUCK DC-DC变换器电感的优化设计[J].南开大学学报(自然科学版),2012,45(6):33-40.
Fu Yuanyuan, Yao Suying,Xu Jiangtao,et al.Optimization of Inductance for BUCK DC-DC Converter[J].Acta Scientiarum Naturalium Universitatis Nankaiensis, 2012,45(6):33-40.
[12]刘树林,刘健,寇蕾,等.BUCK DC/DC变换器的输出纹波电压分析及其应用[J].电工技术学报,2007,22(2):91-97.
Liu Shulin, Liu Jian,Kou Lei,et al.Analysis of Output Ripple Voltage of BUCK DC/DC Converter and Application[J]. Journal of Electrotechnics, 2007,22(2):91-97.
[13]解光军,徐慧芳.峰值电流模式控制非理想BUCK变换器系统建模[J].中国电机工程学报,2012,32(24):52-58.
Xie Guangjun,Xu Huifang. Modeling of Current Programmed Mode Non-ideal BUCK Converter Systems[J]. Proceedings of the CSEE, 2012,32(24):52-58.
[14]蔡宣三,龚绍文.高频功率电子学[M].北京:中国水利水电出版社,2009.
|