TC4管状零件内壁加工残余应力计算及其有限元分析

中国机械工程 ›› 2014, Vol. 25 ›› Issue (19): 2583-2587.

TC4管状零件内壁加工残余应力计算及其有限元分析

孟龙晖;何宁;李亮

南京航空航天大学,南京,210016

出版日期:2014-10-10 发布日期:2014-10-14
基金资助:
国防科技成果推广资助项目（C152012C002）；国家科技重大专项（2012ZX04003021）；高等学校博士学科点专项科研基金资助项目（20123218120025）

Calculation of Residual Stress Induced by Machining in Internal Surface of TC4 Tubular Parts and Its FEA

Meng Longhui;He Ning;Li Liang

Nanjing University of Aeronautics & Astronautics,Nanjing,210016

Online:2014-10-10 Published:2014-10-14
Supported by:
National Science and Technology Major Project ( No. 2012ZX04003021);Research Fund for the Doctoral Program of Higher Education of China（No. 20123218120025）

摘要/Abstract

摘要：

针对残余应力对加工零件使用性能有严重影响以及TC4材料难以用X射线法进行残余应力测量的现状,提出了一种通过测量外壁应变来计算TC4管状零件内壁加工残余应力的方法。为验证该方法的正确性,在有限元软件中对模型内壁进行分层施加预定的随深度变化的残余应力,并用生死单元技术将内层单元逐层“杀死”来模拟实际实验中应力层被腐蚀的过程。根据外层不断变化的应变以及推导出的计算公式来计算内壁随深度变化的残余应力,并将计算得到的残余应力与之前所施加的应力进行对比,可发现该方法求得的残余应力值准确度较高,由此可以得出结论：该方法可用于测量实际零件的残余应力。

关键词: 残余应力, 有限元分析, 应变, 生死单元

Abstract:

With respect to residual stresses had a strong effect on the usability of the parts and the residual stresses in the material of TC4 were hard to measure with XRD method, this paper briefly presented a method to calculate the residual stresses induced by machining in internal surface of TC4 tubular parts. In order to verify the correctness of the method, the residual stresses varying with depth were applied in internal surface of the model in FEA software, the technology of element birth and death was used to “kill” the elements in internal surface layer by layer to simulate the process of corrosion in experiments. And the residual stresses were calculated based on the changing strains on the external surface of the part and the deduced formulas, and then the calculated residual stresses were contrasted to the stresses that were applied to the model.It can be found that the accuracy of the calculated residual stress is very high, so it can be concluded that this method can be applied to measure the residual stress in practice.

Key words: residual stress, finite element analysis(FEA), strain, element birth and death

中图分类号:

TH161

孟龙晖, 何宁, 李亮. TC4管状零件内壁加工残余应力计算及其有限元分析[J]. 中国机械工程, 2014, 25(19): 2583-2587.

Meng Longhui, He Ning, Li Liang. Calculation of Residual Stress Induced by Machining in Internal Surface of TC4 Tubular Parts and Its FEA[J]. China Mechanical Engineering, 2014, 25(19): 2583-2587.

参考文献

[1]Withers P J, Turski M, Edwards L, et al. Recent Advances in Residual Stress Measurement[J]. International Journal of Pressure Vesselsand Piping，2008，85(3):118-127.
[2]葛文翰.旋压筒形件的残余应力的分析研究[J].锻压机械,1985(3):2-12.
Ge Wenhan.The Analysis of the Residual Stress in Spinning Tube Parts[J].Metal Forming Machinery,1985(3):2-12.
[3]Yu X X, Lau W S, Lee T C. A Finite Element Analysis of Residual Stresses in Stretch Turning[J]. Tools Manufact,1997, 37(10): 1525-1537.
[4]Liu Chuan, Zhang Jianxun, Wu Bing, et al. Numerical Investigation on the Variation of Welding Stresses after Material Removal from a Thick Titanium Alloy Plate Joined by Electron Beam Welding[J]. Materials and Design, 2012, 34: 609-617.
[5]王秋成.航空铝合金残余应力消除及评估技术研究[D].杭州：浙江大学，2003.
[6]Larsson C, Holden T M, Bourke M A M. Measurement and Modeling of Residual Stress in a Welded Haynes 25 Cylinder[J]. Materials Science and Engineering A, 2005, 399(1/2):49-57.
[7]Grzesik W, Zak K. Surface Integrity Generated by Oblique Machining of Steel and Iron Parts[J]. Journal of Materials Processing Technology,2012,212(12):2586-2596.
[8]Mirzaee-Sisan A, Fookes A J, Truman C E,et al.Residual Stress Measurement in a Repair Welded Header in the As-welded Condition and after Advanced Post Weld Treatment[J]. International Journal of Pressure Vessels and Piping, 2007, 84(5):265-273.
[9]Ficquet X, Smith D J, Truman C E,et al. Measurement and Prediction of Residual Stress in a Bead-on-plate Weld Benchmark Specimen[J]. International Journal of Pressure Vessels and Piping,2009,86(1):20-30.
[10]Navas V G, Gonzalo O, Bengoetxea I. Effect of Cutting Parameters in the Surface Residual Stresses Generated by Turning in AISI 4340 Steel[J]. International Journal of Machine Tools & Manufacture,2012,61:48-57.
[11]Pratihar S, Stelmukh V, Hutchings M T,et al. Measuremet of the Residual Stress Field in MIG-welded Al-2024 and Al-7150 Aluminium Alloy Compact Tension Specimens[J]. Materials Science and Engineering A,2006, 437(1):46-53.
[12]Sebastiani M, Eberl C, Bemporad E,et al.Depth-resolved Residual Stress Analysis of Thin Coatings by a New FIB-DIC Method[J]. Materials Science and Engineering A, 2011, 528(27):7901-7908.
[13]Carrera E, Rodriguez A, Talamantes J,et al. Measurement of Residual Stresses in Cast Aluminium Engine Blocks[J]. Journal of Materials Processing Technology,2007,189(1/2):206-210.
[14]Rossini N S, Dassisti M, Benyounis K Y,et al. Methods of Measuring Residual Stresses in Components[J]. Materials and Design,2012,35:572-588.
[15]Moore M G, Evans W P. Mathematical Correction for Stress in Removed Layers in X-ray Diffraction Residual Stress Analysis[J]. SAE Trans.,1958, 66:340-345.
[16]George D, Smith D J. Through Thickness Measuremet of Residual Stresses in a Stainless Steel Cylinder Containig Shallow and Deep Weld Repairs[J]. International Journal of Pressure Vessels and Piping, 2005,82(4):279-287.