基于降维的驾驶员侧约束系统高维目标优化

摘要/Abstract

摘要：

为解决将高维目标变为单目标优化时各子目标不能同时较优,而多目标算法直接用于高维目标优化时又存在难以找到一个有代表性的Pareto非劣解集问题,在某轿车驾驶员侧约束系统的优化过程中提出了乘员损伤准则与多目标算法协同优化的方法。在已有相关损伤准则基础上根据最新版的FMVSS 208和ECE R94法规提出了适合研究问题的损伤准则;以提出的损伤准则为媒介,将一个高维目标优化问题降为一个低维目标优化问题,通过灵敏度分析、实验设计、多项式近似模型筛选出优化设计变量并得到近似模型,用多目标算法NSGA-Ⅱ对近似模型进行计算得到Pareto非劣解集,将得到的Pareto非劣解集中的每个解代入损伤准则损伤值计算公式,升序排列得到各子目标同时较优而损伤值最小的优化解。最终的优化结果表明：该方法很好地解决了乘员约束系统的高维目标优化问题,优化效果明显。

关键词: 乘员约束系统, 高维目标, 优化, 降维, Pareto解集

Abstract:

To solve the problems that each sub-goal cannot reach optimum at the same time when multiple objectives were integrated into a single objective optimization, and using multi-objective genetic algorithm for high-dimensional objective optimization it was hard to find a representative non-inferiority Pareto solution, an optimization method coordinated occupant injury criteria with multi-objective evolutionary algorithm was proposed for optimizing the driver side restraint system of a passenger car. Based on the existed injury criterion and the latest version of FMVSS 208 and ECE R94, a new injury criterion (IC) was proposed for the problems mentioned above. The IC was used to reduce a high-dimensional objective optimization problem to a low-dimensional objective optimization problem. Sensitivity analysis and experimental design were conducted to get an approximate model, and NSGA-Ⅱ evolutionary algorithm was used to calculate non-inferiority Pareto solution. Then every non-inferiority Pareto solution was put into the injufy formula, which ordered in ascending order, to obtain an optimization solution that each sub goal can reach optimum at the same time, meanwhile, the injury value was minimum. The optimized results show that high-dimensional optimization problems of occupant restraint system are solved, and the effect of optimization is significant.

Key words: occupant restraint system, high-dimensional objective, optimization, reduction of dimension, Pareto solution

中图分类号:

U463.83

白中浩, 卢静, 王玉龙, 费敬. 基于降维的驾驶员侧约束系统高维目标优化[J]. 中国机械工程, 2014, 25(11): 1556-1561.

Bai Zhonghao, Lu Jing, Wang Yunlong, Fei Jing. High-dimensional Objective Optimization of Driver Side Restraint System Based on Reduction of Dimension[J]. China Mechanical Engineering, 2014, 25(11): 1556-1561.

参考文献

[1]张君媛, 黄柏, 冯原，等. 基于多工况的汽车碰撞乘员约束系统参数匹配的研究[J]. 中国机械工程, 2007, 18(24)： 3005-3008.
Zhang Junyuan, Huang Bai, Feng Yuan, et al. Study on the Optimization of Occupant Restraint System Based on Multiple Load Cases[J]. China Mechanical Engineering, 2007, 18(24)： 3005-3008.
[2]张学荣, 刘学军, 苏清祖. 轿车乘员约束系统的试验验证及参数优化[J]. 中国机械工程, 2008, 19(10)：1254-1257.
Zhang Xuerong, Liu Xuejun, Su Qingzu. Testing Validation and Parameter Optimization in Occupant Restraint System Development[J]. China Mechanical Engineering, 2008, 19(10)： 1254-1257.
[3]Knowles J, Corne D, Deb K. Multi-objective Problem Solving form Nature[M]. New York: Spring-Verlag, 2008.
[4]Raquel C R, Naval P C Jr. An Effective Use of Crowding Distance in Multi-objective Particle Swarm Optimization[C]//Proc. of Congress Evolutionary Compution. Washington DC: ACM Press, 2005: 257-264.
[5]张维刚, 廖兴涛, 钟志华. 基于逐步回归模型的汽车碰撞安全性多目标优化[J]. 机械工程学报, 2007, 43(8): 142-147.
Zhang Weigang, Liao Xingtao，Zhong Zhihua. Multi-objective Optimization for Crash Safety Design of Vehicles Using Stepwise Regression Model[J]. Chinese Journal of Mechanical Engineering, 2007, 43(8): 142-147.
[6]孙光永, 李光耀, 钟志华,等. 基于序列响应面法的汽车结构耐撞性多目标粒子群优化设计[J]. 机械工程学报, 2009, 45(2)：224-230.
Sun Guangyong, Li Guangyao, Zhong Zhihua, et al. Optimization Design of Multi-objective Particle Swarm in Crashworthiness Based on Sequential Response Surface Method[J]. Journal of Mechanical Engineering, 2009, 45(2)：224-230.
[7]公茂果, 焦李成, 杨咚咚,等. 进化多目标优化算法研究[J]. 软件学报, 2009, 20(2): 271-289.
Gong Maoguo, Jiao Licheng, Yang Dongdong, et al. Research on Evolutionary Multi-objective Optimization Algorithms[J]. Journal of Software, 2009, 20(2): 271-289.
[8]Deb K, Pratap A, Agarwal S, et al. A Fast and Elitist Multi-objective Genetic Algorithm: NSGA-Ⅱ[J]. IEEE Transactions on Evolutionary Computation, 2002, 6(2): l82-197.
[9]David C V, Sudhakar A. Assessing the Safety Performance of Occupant Restraint Systems[C]//Proceedings of the SAE World Congress. Detroit: SAE Technical Paper, 1990: 902328.
[10]张君媛, 毕莹, 周剑,等. 面向欧洲新车评价的汽车正面碰撞儿童座椅参数设计[J]. 中国机械工程, 2010, 21(8): 983-987.
Zhang Junyuan, Bi Ying, Zhou Jian, et al. Child Restraint System Parameter Design of a CAR for the Frontal Crash Mode in E-NACP[J]. China Mechanical Engineering, 2010, 21(8): 983-987.
[11]张维刚, 何文, 钟志华. 车辆乘员碰撞安全保护技术[M]. 长沙: 湖南大学出版社, 2007.
[12]Koch P N, Yang R J, Gu Lei. Design for Six Sigma through Robust Optimization[J]. Struct. Multidist. Optim., 2004, 26:235-248.

[1]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[2]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[3]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[4]	梁淑宝, 张培林, 曹建军, 任国全. 基于蚁群优化的提升小波包渐变式阈值降噪方法 [J]. J4, 201016, 21(16): 1964-1969.
[5]	张西宁, 赵明, 温广瑞. 一种轴系全息动平衡配重的多目标优化方法 [J]. J4, 201016, 21(16): 1974-1977.
[6]	李西兴, 杨道明, 李鑫, 吴锐, . 基于混合遗传鲸鱼优化算法的柔性作业车间自动导引车融合调度方法[J]. 中国机械工程, 2021, 32(08): 938-950，986.
[7]	刘峰, 赵彦凯, 姚竞争, 王贺. 基于主体参数化分析的潜水器多学科优化[J]. 中国机械工程, 2021, 32(08): 997-1007.
[8]	翁剑, 庄可佳, 浦栋麟, 丁汉, . 基于机器学习和多目标算法的钛合金插铣优化[J]. 中国机械工程, 2021, 32(07): 771-777.
[9]	倪恒欣, 阎春平, 陈建霖, 侯跃辉, 陈亮. 高速干切滚齿工艺参数的多目标优化与决策方法[J]. 中国机械工程, 2021, 32(07): 832-838.
[10]	张静, 程肥肥, 宋宝林, 刘志刚, 张卫华. [设计与优化]基于协同优化算法的高速受电弓多学科设计优化[J]. 中国机械工程, 2021, 32(04): 490-498.
[11]	张琦1;李增亮1;董祥伟1;刘延鑫1;王雨婷2. 大功率潜水电机冷却系统分析方法与试验研究[J]. 中国机械工程, 2021, 32(03): 368-377.
[12]	易永胜1,2;李伟1;高亮1;肖蜜1;邱浩波1. 一种基于协同近似的多学科设计优化方法[J]. 中国机械工程, 2021, 32(01): 12-17.
[13]	刘涛;张丽芳. 基于改进粒子群优化算法的变截面涡旋盘瞬时铣削力模型参数求解[J]. 中国机械工程, 2020, 31(24): 2943-2949.
[14]	赵保林1,2;李博1,2;夏蕊1,2;王学文1,2;王赟3. 刮板输送机中板仿生耐磨优化试验研究[J]. 中国机械工程, 2020, 31(24): 3006-3015.
[15]	张大志, 管明升, 张清东, 王爱国, 周新亮. [成形过程仿真优化与集成计算材料工程]限动芯棒连轧管机轧制过程轧件变形行为及规律仿真[J]. 中国机械工程, 2020, 31(22): 2691-2698.