[1]程大中.高压水射流与机械刀具结合破岩初步试验总结[J].高压水射流,1982,(2):1-13.
[2]Hood M. Cutting Strong Rock with a Drag Bit As- sisted by High-pressure Water Jets[J]. Journal of the South African Institute of Mining and Metallur- gy,1976,77:79-90.
[3]Li X B,Summers D A,Rupert G,et al. Experiment Investigation on the Breakage of Hard Rock by PDC Cutters with Combined Action Modes[J].Tunnel- ling and Underground Space Technology, 2011,16 : 107-114.
[4]张文华 [1],汪志明 [1],于军泉 [2],孙清德 [1].高压水射流-机械齿联合破岩数值模拟研究[J].岩石力学与工程学报,2005,24(23):4373-4382.
[5]廖华林,李根生,等.超高压水射流辅助破岩钻孔研究进展[J].岩石力学与工程学报,2002,21(A02):2583-2587.
[6]汪志明[1],孙清德[1,2],于军泉[1,2],王镇全[1].超高压双流道PDC钻头破岩机制研究[J].岩石力学与工程学报,2007,26(4):795-803.
[7]Liu S Y,Du C L,Cui X X. Research on the Cutting Force of a Pick[J]. Mining Science and Technology, 2009,19 : 514-517.
[8]刘送永[1],杜长龙[1],崔新霞[1],李宁宁[1].不同齿身锥度和合金头直径截齿的截割试验[J].煤炭学报,2009,34(9):1276-1280.
[9]倪红坚[2],王瑞和[1],葛洪魁[1].高压水射流破岩的数值模拟分析[J].岩石力学与工程学报,2004,23(4):550-554.
[10]杨永印,周卫东.利用PIV技术对淹没冲击水射流动力学特性的研究[J].石油钻探技术,2001,29(4):19-21.
[11]王瑞和,倪红坚.高压水射流破岩钻孔过程的理论研究[J].石油大学学报:自然科学版,2003,27(4):44-47.
[12]Evans A. Theory of the Picks Cutting Force for Point Attack Picks [J]. International Journal of Mining Engineering, 1984,2 : 63-71.
[13]Nnishimatsu Y. The Mechanics of Rock Cutting [J]. Rock Mechanics and Rock Enginneering, 1985,18:131-140.
[14]Bao R H, Zhang L C, Yao Q Y. Estimating the Peak Indentation Force of the Edge Chipping of Rocks Using Single Point Attack Pick[J]. Rock Mechanics and Rock Enginneering, 2011,44 : 339- 347. |