有限元网格剖分与网格质量判定指标
李海峰1;吴冀川2;刘建波1;梁宇兵1
1.中国工程物理研究院计算机应用研究所,绵阳,621900
2.新加坡国立大学,新加坡,119077
Finite Element Mesh Generation and Decision Criteria of Mesh Quality
Li Haifeng1;Wu Jichuan2;Liu Jianbo1;Liang Yubing1
1.Computer Application Institution of CAEP, Mianyang, Sichuan, 621900
2.National University of Singapore,Singapore,119077
摘要 讨论了网格剖分中的一些常见问题,阐述了网格剖分中应遵循的要求,介绍了近十多年来网格剖分方法的研究进展,回顾了网格剖分的各种算法,并比较了各种算法的优缺点。基于工程计算需求,提出了网格质量要求及判定指标,探讨了网格质量优化问题。同时,介绍了当前广泛使用的网格剖分前处理商业软件及其应用状况,并结合工作实际,给出了复杂模型网格剖分的具体实例。最后展望了网格剖分的发展趋势。
关键词 :
Abstract :Some general problems in mesh generation were discussed, the demands of mesh generation were expounded, the mesh generation methods were introduced, the mesh generation algorithms in last ten years were retrospected and their advantages and disadvantages were compared. Based on the requirements of practical engineering calculation,the authors brought up the mesh quality demands and decision index, explored the mesh quality optimization, introduced the preprocessors and their applications of the commercial softwares,then gave out several practical examples of the mesh generation. At last, the trends of mesh generation were also presented.
Key words :
mesh generation')" href="#">mesh generation
finite element;algorithm
mesh quality
decision index
引用本文:
李海峰1, 吴冀川2, 刘建波1, 梁宇兵1. 有限元网格剖分与网格质量判定指标
[J]. 中国机械工程, 2012, 23(3): 368-377.
LI Hai-Feng-1, TUN Ji-Chuan-2, LIU Jian-Bei-1, LIANG Yu-Bing-1. Finite Element Mesh Generation and Decision Criteria of Mesh Quality
. China Mechanical Engineering, 2012, 23(3): 368-377.
链接本文:
http://www.cmemo.org.cn/CN/ 或 http://www.cmemo.org.cn/CN/Y2012/V23/I3/368
[1]
关振群[1],单菊林[1],顾元宪[1].基于转换模板的三维实体全六面体网格生成方法[J].计算力学学报,2005,22(1):32-37.
[2]
张建华,叶尚辉.有限元网格自动生成典型方法及发展方向[J].计算机辅助设计与制造,1996(2):28-31.
[3]
王明强[1],朱永梅[1],刘文欣[1].有限元网格划分方法应用研究[J].机械设计与制造,2004(1):22-24.
[4]
罗特军[1],罗季军[2].有限元网格优化方法[J].四川联合大学学报:工程科学版,1999,3(3):65-72.
[5]
吕军[1],王忠金[2],等.有限元六面体网格的典型生成方法及发展趋势[J].哈尔滨工业大学学报,2001,33(4):485-490.
[6]
胡恩球,张新访.有限元网格生成方法发展综述[J].计算机辅助设计与图形学学报,1997,9(4):378-383.
[7]
黄志超,包忠诩,周天瑞,陈泽中.有限元网格划分技术研究[J].南昌大学学报:工科版,2001,23(4):25-31.
[8]
李卫民[1].有限元网格生成算法的评述[J].泰州职业技术学院学报,2004,4(1):12-14.
[9]
T. Blacker. Automated Conformal Hexahedral Meshing Constraints, Challenges and Opportunities[J] 2001,Engineering With Computers(3):201~210
[10]
闵卫东,唐泽圣.有限元网络划分技术[J].计算机研究与发展,1995,32(7):37-42.
[11]
关振群,宋超,顾元宪,隋晓峰.有限元网格生成方法研究的新进展[J].计算机辅助设计与图形学学报,2003,15(1):1-14.
[12]
于开平,周传月,谭惠丰等编著.HYPERMESH从入门到精通[M],2005:445.
[13]
单菊林.自适应有限元网格生成算法研究与应用[D].大连理工大学,2007:
[14]
李俊,游理华.有限元网格自动生成算法的研究进展[J].机械研究与应用,1998,11(4):25-27.
[15]
Ho-Le K . Finite Element Mesh Generation Aethods:a Review and Classification [J]. 1988,20(01) .
[16]
George P L . Automatic Mesh Generation.Applications to Finite Element Methods [M]. 1991 .
[17]
Lohner R Juan R C . Parallel Advancing Front Grid Generation [A]. 1999 .
[18]
Wordenweber B . Finite Element Mesh Generation [J]. 1984,16(05) .
[19]
Woo T C Thomasma T . An Algorithm for Generating Solid Element in Objects with Holes [J]. 1984,18(02) .
[20]
Ruppert J Seidel R . On the Difficulty of Triangulating Three-dimensional Nonconvex Polyhedra [J]. 1992,7(03) .
[21]
Yerry M A Shephard M S . Automatic Three Dimensional Mesh Generation by the Modified-octree Technique [J]. 1984,20(11) .
[22]
Huang C Y . Recent Progress in Multiblock Hybrid Structured and Unstructured Mesh Generation [J]. 1997,150(1/4) .
[23]
Regina C. Almeida Raul A. Feijoo Augusto C. Galeao Claudio Padra Renato S. Silva . 查看详情 [J]. 2000 .
[24]
Fuenmayor F J Restrepo J L Tarancn J E . Error Estimation and H-adaptivere Finement in the Analysis of Natural Frequencies [J]. 2001,38(02) .
[25]
Chrisochoides N. Nave D. . 查看详情 [J]. 2000 .
[26]
Liu Shangsheng Rajit G . Automatic Hexahedral Mesh Generation by Recursive Convexand Swept Volume Decomposition [A]. 1997 .
[27]
古成中[1],吴新跃[1].有限元网格划分及发展趋势[J].计算机科学与探索,2008,2(3):248-259.
[28]
Schneiders R Bunten R . Automatic Generation of Hexahedral Finite Element Meshes [J]. 1995,12 .
[29]
Schneiders R Weiler F . Octree-based Generation of Hexahedral Element Mesher [A]. 1996 .
[30]
Matthias Muller-Hannemann . 查看详情 [J]. 2002 .
[31]
Takeo Taniguchi Tomoaki Goda Harald Kasper . Hexahedra Mesh Generation of Complex Composite Domain [A]. 1996 .
[32]
Shephard M S . Approaches to the Automatic Generation and Control of Finite Element Meshes [J]. 1998,4(04) .
[33]
郑岩 顾松东 吴斌 . Marc 2001从入门到精通 [M]. 2003 .
[1]
李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化
[J]. J4, 201016, 21(16): 1915-1920.
[2]
罗洁思, 于德介, 史美丽. 基于SVD和线调频小波路径追踪的转速波动齿轮箱故障诊断
[J]. J4, 201016, 21(16): 1947-1951.
[3]
胡超, 刘佐民. 基于材料匹配性的球轴承Heathcote黏-滑模型研究
[J]. J4, 201016, 21(16): 1969-1973.
[4]
李燕元, 王小平, 朱丽君. 基于弧长参数的高光线求解算法
[J]. J4, 201016, 21(16): 1981-1985.
[5]
董国疆, 赵长财, 曹秒艳, 郝海滨, 杨东峰. 圆筒件固体颗粒介质成形壁厚及变形规律研究
[J]. J4, 201016, 21(16): 1992-1998.
[6]
景轩1;谭援强2;朱杰3. 径向磁轴承磁路耦合对磁力的影响及其解耦控制策略 [J]. 中国机械工程, 2017, 28(14): 1669-1676.
[7]
闫凯1,2,3;张静1,2,3;寇子明1,2,3. S形折叠式柔性铰链结构设计 [J]. 中国机械工程, 2017, 28(14): 1696-1700.
[8]
寇发荣;杜嘉峰;王哲;范二军;李冬. 电液半主动馈能悬架非线性建模与协调性优化 [J]. 中国机械工程, 2017, 28(14): 1701-1707.
[9]
祝效华;敬洋. 基于三维接触的滑环式旋转组合密封性能主控因素分析 [J]. 中国机械工程, 2017, 28(13): 1548-1553.
[10]
白亚莉1;张毅1;冀敏2;刘文强3. 基于多分布响应面算法的火炮方向机齿轮传动误差可靠性分析 [J]. 中国机械工程, 2017, 28(13): 1593-1600.
[11]
方一鸣1,2;郑贺军1;刘乐1;胡春洋3. 基于模拟退火-粒子群算法优化支持向量机参数的连铸漏钢预报 [J]. 中国机械工程, 2017, 28(12): 1462-1467.
[12]
李杨1,2,3;吴运新1,2,3;龚海1,2,3;张宇1,2,3. 中子应力谱仪样品承重台回转支承载荷分析 [J]. 中国机械工程, 2017, 28(12): 1434-1441.
[13]
凌静秀1;孙伟2;杨晓静1;童昕1. 全断面隧道掘进机刀盘裂纹尖端应力强度因子收敛性分析 [J]. 中国机械工程, 2017, 28(10): 1143-1148.
[14]
司远1;钱立军1;邱利宏1,2;李浩1. 基于等效油耗最小的四驱混合动力汽车能量管理 [J]. 中国机械工程, 2017, 28(09): 1112-1117.
[15]
曾莎莎;彭卫平;雷金. 基于混合算法的薄壁件铣削加工工艺参数优化 [J]. 中国机械工程, 2017, 28(07): 842-845,851.