[1]王中秋[1],李剑峰[1],孙杰[1],李桂玉[1].航空整体结构件侧壁滚压校正的有限元分析[J].中国机械工程,2009,10(5):612-616.
[2]白万金[1],柯映林[1],吴红兵[1],董辉跃[1].航空薄壁件对称及阶梯对称铣削的数值仿真与分析[J].中国机械工程,2009,10(2):214-217.
[3]王华明[1],张凌云[1],李安[1],汤海波[1],张述泉[1],方艳丽[1],李鹏[1].高性能航空金属结构材料及特种涂层激光熔化沉积制备与成形研究进展[J].金属热处理,2008,33(1):82-85.
[4]孙玉文[1],刘伟军[2],王越超[2],贾振元[3].基于成形工具姿态调整的适应性积层制造技术研究[J].高技术通讯,2003,13(2):55-59.
[5]Alireza Fathi,Amir Khajepour,Ehsan Toyserkani,Mohammad Durali.Clad height control in laser solid freeform fabrication using a feedforward PID controller[J]. The International Journal of Advanced Manufacturing Technology . 2007 (3-4)
[6]Bi Guijun,Schrmannb B,Gasser Aet al.Develop-ment and Qualification of a Novel Laser-claddingHead with Integrated Sensors. InternationalJournal of Machine Tools&Manufacture . 2007
[7]Zhong Minlin,Liu Wenjin,Ning Guoqinget al.La-ser Direct Manufacturing of Tungsten Nickel Colli-mation Component. Journal of Materials Pro-cessing Technology . 2004
[8]Pinkerton AJ,Li Lin.The Significance of DepositionPoint Standoff Variations in Multiple-layer CoaxialLaser Cladding. International Journal of MachineTools&Manufacture . 2004
[9]D. M. Hu,R. Kovacevic.Sensing, modeling and control for laser-based additive manufacturing. International Jurnal of Machine Tools & Manufacture . 2003
[10]Li Peng,Ji Shengqin,Zeng Xiaoyan,et al.Direct laser fabrica-tion of thin-walled metal parts under open-loop control. Inter-national Journal of Machine Tools&Manufacture . 2007
[11]Mazumder J,Dutta D,Kikuchi N,et al.Closed loop direct metal deposition: art to part. Optics and Lasers in Engineering . 2000
[12]Jichang Liu,Lijun Li.In-ti me motion adjust ment in la-ser cladding manufacturing process for i mproving di-mensional accuracy and surface finish of the formed part. Optics and Laser Technology . 2004
[13]T. Ehsan,K. Amir.A Mechatronics Approach to Laser Powder Deposition Process. Mechatronics . 2006 |