变送粉量法斜坡薄壁件的激光熔覆成形研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (6): 701-705,714.

变送粉量法斜坡薄壁件的激光熔覆成形研究

王续跃;郭会茹;徐文骥;郭东明;王连吉

大连理工大学，大连，116024

出版日期:2011-03-25 发布日期:2011-04-15
基金资助:
国家自然科学基金资助项目(50975041，50775019)；辽宁省科研项目计划资助项目(2008S054)
National Natural Science Foundation of China（No. 50975041，50775019）;
Liaoning Provincial Scientific Research Project of China（No. 2008S054）

Laser Cladding Forming of a Ramp Thin Wall with Variable Powder Feed Rate

Wang Xuyue;Guo Huiru;Xu Wenji;Guo Dongming;Wang Lianji

Dalian University of Technology,Dalian,Liaoning,116024

Online:2011-03-25 Published:2011-04-15
Supported by:

National Natural Science Foundation of China（No. 50975041，50775019）;
Liaoning Provincial Scientific Research Project of China（No. 2008S054）

摘要/Abstract

摘要：

为解决采用2.5D切片分层成形时的台阶效应问题，建立了变厚度切片成形几何模型，研究了变送粉量法激光多层熔覆成形对斜坡薄壁件几何形状精度的影响。在单道熔覆范围内，每熔覆2mm长改变一次送粉量，送粉量从0.5g/min近似连续地增大到3.0g/min，获得沿熔覆长度方向、高度从0.05mm近似线性地增大到0.46mm的单道单层熔覆层。用MATLAB仿真斜坡和“山”形薄壁件的成形过程，规划出了正确的扫描路径。采用仿真得到的扫描路径，对316L不锈钢粉末进行多层熔覆成形实验验证，成形出了表面较光滑且具有3.37°倾角的斜坡，有效减小了分层成形的台阶效应对斜坡薄壁件几何形状精度的影响。

关键词:

激光熔覆成形, 变送粉量, 变厚度切片, 形状精度

Abstract:

To prevent stair-step effect when layered forming parts using

2.5D slices, a geometrical model formed with variable thickness slices was developed. The research work performed with variable powder feed rate. The relationships between the geometrical precision of the parts formed by laser cladding forming (LCF) and the variable powder feed rate were investigated. While change of the powder feed rate every 2mm,the height of the cladding layer increases from 0.05mm to 0.46mm with the powder feed rate varying from 0.5g/min to 3.0g/min. The correct scanning paths were planned by simulating forming process of a ramp and a mountain shape parts through Matlab program. Using the scanning path obtained, a relatively smooth ramp of 316L stainless steel with a slope angle (3.37°) was formed through experiments. The results show the method with variable powder feed rate reduces the stair-step effect significantly and improves the geometrical precision of the ramp thin wall.

Key words:

laser cladding forming, variable powder feed rate, variable thickness slice, geometrical precision

中图分类号:

TG665

王续跃, 郭会茹, 徐文骥, 郭东明, 王连吉.

变送粉量法斜坡薄壁件的激光熔覆成形研究

[J]. 中国机械工程, 2011, 22(6): 701-705,714.

WANG Xu-Ti, GUO Hui-Ru, XU Wen-Ji, GUO Dong-Meng, WANG Lian-Ji.

Laser Cladding Forming of a Ramp Thin Wall with Variable Powder Feed Rate

[J]. China Mechanical Engineering, 2011, 22(6): 701-705,714.

参考文献

[1]王中秋[1],李剑峰[1],孙杰[1],李桂玉[1].航空整体结构件侧壁滚压校正的有限元分析[J].中国机械工程,2009,10(5):612-616.
[2]白万金[1],柯映林[1],吴红兵[1],董辉跃[1].航空薄壁件对称及阶梯对称铣削的数值仿真与分析[J].中国机械工程,2009,10(2):214-217.
[3]王华明[1],张凌云[1],李安[1],汤海波[1],张述泉[1],方艳丽[1],李鹏[1].高性能航空金属结构材料及特种涂层激光熔化沉积制备与成形研究进展[J].金属热处理,2008,33(1):82-85.
[4]孙玉文[1],刘伟军[2],王越超[2],贾振元[3].基于成形工具姿态调整的适应性积层制造技术研究[J].高技术通讯,2003,13(2):55-59.
[5]Alireza Fathi,Amir Khajepour,Ehsan Toyserkani,Mohammad Durali.Clad height control in laser solid freeform fabrication using a feedforward PID controller[J]. The International Journal of Advanced Manufacturing Technology . 2007 (3-4)
[6]Bi Guijun,Schrmannb B,Gasser Aet al.Develop-ment and Qualification of a Novel Laser-claddingHead with Integrated Sensors. InternationalJournal of Machine Tools&Manufacture . 2007
[7]Zhong Minlin,Liu Wenjin,Ning Guoqinget al.La-ser Direct Manufacturing of Tungsten Nickel Colli-mation Component. Journal of Materials Pro-cessing Technology . 2004
[8]Pinkerton AJ,Li Lin.The Significance of DepositionPoint Standoff Variations in Multiple-layer CoaxialLaser Cladding. International Journal of MachineTools&Manufacture . 2004
[9]D. M. Hu,R. Kovacevic.Sensing, modeling and control for laser-based additive manufacturing. International Jurnal of Machine Tools & Manufacture . 2003
[10]Li Peng,Ji Shengqin,Zeng Xiaoyan,et al.Direct laser fabrica-tion of thin-walled metal parts under open-loop control. Inter-national Journal of Machine Tools&Manufacture . 2007
[11]Mazumder J,Dutta D,Kikuchi N,et al.Closed loop direct metal deposition: art to part. Optics and Lasers in Engineering . 2000
[12]Jichang Liu,Lijun Li.In-ti me motion adjust ment in la-ser cladding manufacturing process for i mproving di-mensional accuracy and surface finish of the formed part. Optics and Laser Technology . 2004
[13]T. Ehsan,K. Amir.A Mechatronics Approach to Laser Powder Deposition Process. Mechatronics . 2006