中国机械工程

• 机械基础工程 • 上一篇    下一篇

超导磁液推力轴承的结构设计及性能分析

闫岗1;袁小阳1;陈润霖2;贾谦1;金英泽1   

  1. 1. 西安交通大学现代设计及转子轴承系统教育部重点实验室,西安,710049
    2. 西安理工大学机械与精密仪器工程学院,西安,710048
  • 出版日期:2021-01-10 发布日期:2021-01-20
  • 基金资助:
    国家自然科学基金(51775412)

Structural Design and Performance Analysis of Superconducting Magnetic Liquid Thrust Bearings

YAN Gang1;YUAN Xiaoyang1;CHEN Runlin2;JIA Qian1;JIN Yingze1   

  1. 1. Key Laboratory of Modern Design and Rotor Bearing System, Ministry of Education,Xian Jiaotong University, Xian, 710049
    2. School of Machinery and Precision Instrument Engineering,Xian University of Technology, Xian, 710048
  • Online:2021-01-10 Published:2021-01-20

摘要: 为提高大型飞轮储能系统的效率和稳定性,设计了一种超导磁力与静压流体力相复合、由16块超导瓦和8块带小孔节流器的静压瓦组成的推力轴承。首先基于超导体局域模型和静压流体方程建立分析模型,然后采用解耦的方法分析复合轴承的刚度等性能指标,对复合轴承进行优化。结果表明复合轴承既可以保证稳定悬浮,又能保持较大的刚度,其功率损耗也在可接受范围内。

关键词: 飞轮储能, 超导磁力, 推力轴承, 静压流体力, 性能分析, 刚度

Abstract: In order to improve the efficiency and stability of large-scale flywheel energy storage systems, a thrust bearing which consisted of 16 superconducting shoes and 8 small orifice restrictors that were composed of static pressure tiles was designed, combined with superconducting magnetic force and hydrostatic fluid force. Firstly, an analysis model was established based on superconductor local model and hydrostatic fluid equation. And then, performance indexes such as stiffness of the composite bearings were analyzed by decoupling method, and the composite bearings were optimized. The results show that the composite bearings may ensure stable suspension and maintain high rigidity, and the power loss is within the acceptable ranges.

Key words: flywheel energy storage, superconducting magnetic force, thrust bearing, hydrostatic fluid force, performance analysis, stiffness

中图分类号: