[1]KLARBRING A. An Introduction to Structural Optimization[M]. Berlin: Springer, 2008:15-35.
[2]SOKOLOWSKI J, ZOLESIO J P. Introduction to Shape Optimization[M].Berlin: Springer, 1992:229-263.
[3]CASSIS J H, SCHMIT L A. Optimum Structural Design with Dynamic Constraints[J]. Journal of the Structural Division,1976,102(10):2053-2071.
[4]BRAIBANT V, FLEURY C. Shape Optimal Design Using B-splines[J]. Computer Methods in Applied Mechanicsand Engineering,1984, 44(3):247-267.
[5]QIAN X . Full Analytical Sensitivities in NURBS Based Isogeometric Shape Optimization[J]. Computer Methods in Applied Mechanics and Engineering, 2010, 199(29/32):2059-2071.
[6]HUGHES T J R, COTTRELL J A, BAZILEVS Y. Isogeometric Analysis: CAD, Finite Elements, NURBS, Exact Geometry and Mesh Refinement[J]. Computer Methods in Applied Mechanics & Engineering, 194(39/41):4135-4195.
[7]吴紫俊, 黄正东, 左兵权, 等. 等几何分析研究概述[J]. 机械工程学报,2015,51(5):114-129.
WU Zijun, HUANG Zhengdong, ZUO Bingquan, et al.Perspectives on Isogeometric Analysis[J]. Journal of Mechanical Engineering,2015,51(5):114-129.
[8]XU G, KWOK T, WANG C C L. Isogeometric Computation Reuse Method for Complex Objects with Topology-consistent Volumetric Parameterization[J].Computer-Aided Design,2017,91:1-13.
[9]CHARAWI L A. Isogeometric Overlapping Schwarz Preconditioners for the Bidomain Reaction-diffusion System[J]. Computer Methods in Applied Mechanics and Engineering,2017,319:472-490.
[10]GU Jinliang, ZHANG Jianming,LI Guangyao. Isogeometric analysis in BIE for 3-D potential problem[J]. Engineering Analysis with Boundary Elements,2012,36(5):858-865.
[11]COOX L, ATAK O, VANDEPITTE D, et al. An Isogeometric Indirect Boundary Element Method for Solving Acoustic Problems in Open-boundary Domains[J]. Computer Methods in Applied Mechanics and Engineering, 2017, 316:186-208.
[12]DORFELMR, BERT J, BERND S. Adaptive Isogeometric Analysis by Local H-refinement with T-splines[J]. Computer Methods in Applied Mechanics and Engineering, 2010,199(5):264-275.
[13]BAZILEVS Y, CALO J A, COTTRELL J A, et al. Isogeometric Analysis Using T-splines[J]. Computer Methods in Applied Mechanics and Engineering, 2010, 199(5):229-263.
[14]LU Jia. Isogeometric Contact Analysis: Geometric Basis and Formulation for Frictionless Contact[J]. Computer Methods in Applied Mechanics and Engineering,2011, 200(5):726-741.
[15]LORENZIS L D, WRIGGERS P, HUGHES T J R. Isogeometric Contact: a Review[J]. GAMM-Mitteilungen,2014,37(1):85-123.
[16]刘宏亮, 祝雪峰, 杨迪雄. 基于等几何分析的结构优化设计研究进展[J]. 固体力学学报,2018, 39(3):248-267.
LIU Hongliang, ZHU Xuefeng, YANG Dixiong. Research on Structural Shape Optimization Based on the Isogeometric Analysis Method[J].Acta Mechanica Solida Sinica,2018,39(3):248-267.
[17]QIAN X, SIGMUND O. Isogeometric Shape Optimization of Photonic Crystals via Coons Patches[J]. Computer Methods in Applied Mechanics and Engineering,2011,200(25):2237-2255.
[18]KOSTAS K V, GINNIS A I, POLITIS C G, et al. Shape-optimization of 2D Hydrofoils Using an Isogeometric BEM Solver[J]. Computer-Aided Design,2017,82(13):79-87.
[19]QIAN X. Topology Optimization in B-spline Space[J].Computer Methods in Applied Mechanics and Engineering,2013,265:15-35.
[20]PARK J, SUTRADHAR A. A Multi-resolution Method for 3D Multi-material Topology Optimization[J].Computer Methods in Applied Mechanics and Engineering,2015,285:571-586.
[21]HERREMA A J, WIESE N M, DARLING C N, et al. A Framework for Parametric Design Optimization Using Isogeometric Analysis[J]. Computer Methods in Applied Mechanics and Engineering, 2017,316:944-965.
[22]DING C S, CUI X Y, LI G Y. Accurate Analysis and Thickness Optimization of Tailor Rolled Blanks Based on Isogeometric Analysis[J]. Structural & Multidisciplinary Optimization,2016,54(4):871-887.
[23]BRAIBANT V, FLEURY C. Shape Optimal Design Using B-splines[J]. Computer Methods in Applied Mechanics and Engineering,1984,44(3):247-267.
[24]BLANCHARD L, DUVIGNEAU R, VUONG A V, et al. Shape Gradient Computation in Isogeometric Analysis for Linear Elasticity[J]. Numerical Analysis,2014(2):361-367.
[25]张升刚,王彦伟.等几何壳体分析与形状优化[J].计算力学学报,2014,31(1):115-119.
ZHANG Shenggang, WANG Yanwei. Isogeometric Shell Analysis & Shape Optimization[J].Chinese Journal of Computational Mechanics, 2014,31(1):115-119.
[26]陈龙, 张高朋. 基于灵敏度分析的三维结构等几何形状优化[J]. 中国机械工程, 2017,28(14):1723-1729.
CHEN Long,ZHANG Gaopeng.Three Dimensional Structural Shape Optimization Based on Sensitivity Analysis Using Isogeometric Analysis[J].China Mechanical Engineering, 2017, 28(14): 1723-1729.
[27]SVANBERG K. The Method of Moving Asymptotes: a New Method for Structural Optimization[J]. International Journal for Numerical Methods in Engineering,1987,24(2):359-373.
[28]潘振宇,何钢,夏婷,等.平面线弹性问题的等几何形状优化方法[J].计算机辅助工程,2014,23(2):27-30.
PAN Zhengyu, HE Gang, XIA Ting, et al. Isogeometric Shape Optimization Method of Plane Linear Elastic Problem[J].Computer Aided Engineering,2014,23(2):27-30.
[29]PIEGL L A, TILLER W. The NURBS Book[M]. Berlin: Springer,1997:47-79. |