[1]SCHULZ H, SPUR G. High Speed Turn-milling:a New Precision Manufacturing Technology for the Machining of Rotationally Symmetrical Workpieces[J]. CIRP Annals:Manufacturing Technology, 1990, 39(1): 107-109.
[2]FILHO J M C. Prediction of Cutting Forces in Mill Turning through Process Simulation Using a Five-axis Machining Center[J]. International Journal of Advanced Manufacturing Technology, 2012, 58(1/4):71-80.
[3]KOPACˇ J, POGACˇNIK M. Theory and Practice of Achieving Quality Surface in Turn Milling[J]. International Journal of Machine Tools & Manufacture, 1997, 37(5):709-715.
[4]CHOUDHURY S K, BAJPAI J B. Investigation in Orthogonal Turn-milling towards Better Surface Finish[J]. Journal of Materials Processing Technology, 2005, 170(3):487-493.
[5]CHOUDHURY S K, MANGRULKAR K S. Investigation of Orthogonal Turn-milling for the Machining of Rotationally Symmetrical Work Pieces[J]. Journal of Materials Processing Technology, 2000, 99(1):120-128.
[6]SAVAS V, OZAY C. The Optimization of the Surface Roughness in the Process of Tangential Turn-milling Using Genetic Algorithm[J]. International Journal of Advanced Manufacturing Technology, 2008, 37(3/4):335-340.
[7]SAVAS V, OZAY C. Analysis of the Surface Roughness of Tangential Turn-milling for Machining with End Milling Cutter[J]. Journal of Materials Processing Technology, 2007, 186(1):279-283.
[8]CHEVRIER P, TIDU A, BOLLE B, et al. Investigation of Surface Integrity in High Speed End Milling of a Low Alloyed Steel[J]. International Journal of Machine Tools & Manufacture, 2003, 43(11):1135-1142.
[9]PAWADE R S, JOSHI S S, BRAHMANKAR P K. Effect of Machining Parameters and Cutting Edge Geometry on Surface Integrity of High-speed Turned Inconel 718[J]. International Journal of Machine Tools & Manufacture, 2008, 48(1):15-28.
[10]王西彬,李慎旺,解丽静,等.一种行星复合铣削系统的设计方法:中国,201310013866.1 [P].2013-05-08.
WANG Xibin, LI Shenwang, XIE Lijing, et al. A Design Method of Planetary Compound Milling System: China, 201310013866.1 [P].2013-05-08.
[11]王西彬,李慎旺,解丽静,等.行星铣刀:中国,201210160584.X [P].2012-09-05.
WANG Xibin, LI Shenwang, XIE Lijing, et al. Planetary Milling Cutter: China,201210160584.X [P]. 2012-09-05.
[12]LI S W, WANG X B, XIE L J, et al. The Milling-Milling Machining Method and Its Realization[J]. International Journal of Advanced Manufacturing Technology, 2015, 76(5/8):1151-1161.
[13]李慎旺. 铣-铣复合加工方法的刀具寿命分析研究[J]. 现代制造工程, 2018(2):102-106.
LI Shenwang. Analysis of Cutting Life of the Milling-Milling Machining Method[J]. Modern Manufacturing Engineering,2018(2):102-106.
[14]郑建新, 任元超. 7050铝合金二维超声滚压加工表面完整性综合评价[J]. 中国机械工程, 2018,29(13):1622-1626.
ZHENG Jianxin, REN Yuanchao. Comprehensive Assessment of Surface Integrity in Two Dimensional Ultrasonic Rolling 7050 Aluminum Alloys[J]. China Mechanical Engineering, 2018,29(13):1622-1626.
[15]刘彦臣, 庞思勤, 王西彬, 等. 表面完整性对高强度钢疲劳寿命影响的试验研究[J]. 兵工学报,2013,34(6):759-764.
LIU Yanchen,PANG Siqin,WANG Xibin,et al. Experimental Study on Effect of Surface Integrity on High-strength Steel Fatigue Life[J]. Acta Armamentarii,2013,34(6):759-764.
[16]SASAHARA H. The Effect on Fatigue Life of Residual Stress and Surface Hardness Resulting from Different Cutting Conditions of 0.45%C Steel[J]. International Journal of Machine Tools & Manufacture, 2005, 45(2):131-136.
[17]NOORI H, JAIN M, NIELSEN K, et al. Effect of Deformation-induced Residual Stress on Peel Strength of Polymer Laminated Sheet Metal[J]. Journal of Adhesion, 2016, 92(10):862-876.
[18]TANG Z T, LIU Z Q, PAN Y Z, et al. The Influence of Tool Flank Wear on Residual Stresses Induced by Milling Aluminum Alloy[J]. Journal of Materials Processing Technology, 2009, 209(9):4502-4508. |