考虑关节固体润滑的在轨装配机械臂振动特性及优化控制

摘要/Abstract

摘要： 面向大型空间结构在轨装配任务的空间机械臂对末端动态性能有很高要求。基于半物理仿真试验修正关节接触力，建立了考虑固体润滑特性的含关节轴向尺寸和间隙的机械臂动力学模型。通过仿真研究机械臂在不同结构参数与工况参数时重力及重力释放下径向振动特性的差异，并针对在轨装配过程中频繁启停的操作需求，分析变负载启停时的振动特性，以改善动态性能为目标，给出了优化控制方法。

关键词: 空间机械臂, 固体润滑, 半物理仿真试验, 振动特性

Abstract: On-orbit assembling manipulators for large space structures possessed high requirements for dynamic performance of the end-effectors. A dynamics model of solid lubricated manipulators with axial sizes and clearances was proposed，and the contact force of solid lubricated joints was modified based on semi-physical simulation experiments. The radial vibration characteristics for different gravity and its releasing environments of the manipulators under different structural parameters and working conditions were investigated by simulations. Focus on the demands of frequently start-stop operations throughout the assembly processes, the vibration characteristics of load mass changes at the start-stop operations of the manipulators were analyzed. Then, a optimal control strategy was presented to improve dynamic performance.

Key words: space manipulator, solid lubricate, semi-physical simulation experiment, vibration characteristic

中图分类号:

TP241

秦利;徐智颖;刘福才;徐继龙. 考虑关节固体润滑的在轨装配机械臂振动特性及优化控制[J]. 中国机械工程.

QIN Li;XU Zhiying;LIU Fucai;XU Jilong. Vibration Characteristics and Optimal Control of On-orbit Assembling Manipulators with Solid Lubricated Joints[J]. China Mechanical Engineering.

参考文献

[1]SHI H, SALIM H， SHI Y， et al. Geometric and Material Nonlinear Static and Dynamic Analysis of Space Truss Structures[J]. Mechanics Based Design of Structures and Machines, 2015, 43(1):38-56.
[2]ERKAYA S. Clearance-induced Vibration Responses of Mechanical Systems: Computational and Experimental Investigations[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2018, 40(2):90.
[3]ERKAYA S, UZMAY I. Experimental Investigation of Joint Clearance Effects on the Dynamics of a Slider-Crank Mechanism[J]. Multibody System Dynamics, 2010, 24(1):81-102.
[4]HOU Y, WANG Y， JING G， et al. Chaos Phenomenon and Stability Analysis of RU-RPR Parallel Mechanism with Clearance and Friction[J]. Advances in Mechanical Engineering, 2018, 10(1): 168781401774625.
[5]BAI Z F, JIANG X, LI F, et al. Reducing Undesirable Vibrations of Planar Linkage Mechanism with Joint Clearance[J]. Journal of Mechanical Science and Technology, 2018, 32(2):559-565.
[6]BAI Z F, ZHAO J J, CHEN J, et al. Design Optimization of Dual-axis Driving Mechanism for Satellite Antenna with Two Planar Revolute Clearance Joints[J]. Acta Astronautica, 2018, 144：80-89.
[7]ERKAYA S, UZMAY I. Effects of Balancing and Link Flexibility on Dynamics of a Planar Mechanism Having Joint Clearance[J]. Scientia Iranica, 2012, 19(3):483-490.
[8]洪昭斌, 陈力, 李文望. 柔性臂杆、柔性关节空间机械臂T-S模糊轨迹跟踪及双柔振动并行综合控制[J]. 中国机械工程, 2016, 27(15):2020-2026.
HONG Zhaobin, CHEN Li, LI Wenwang. T-S Fuzzy Trajectory Tracking and Double-flexible Parallel Control of Flexible-link Flexible-joint Space Manipulator[J]. China Mechanical Engineering, 2016, 27(15): 2020-2026.
[9]KOSHYC S, FLORES P, LANKARANIH M. Study of the Effect of Contact Force Model on the Dynamic Response of Mechanical Systems with Dry Clearance Joints: Computational and Experimental Approaches[J]. Nonlinear Dynamics, 2013, 73(1/2):325-338.
[10]TAN X, CHEN G, SUN D, et al. Dynamic Analysis of Planar Mechanical Systems with Clearance Joint Based on LuGre Friction Model[J]. Journal of Computational and Nonlinear Dynamics, 2018, 13(6):061003.
[11]PENNESTR E, ROSSI V，SALVINI P， et al. Review and Comparison of Dry Friction Force Models[J]. Nonlinear Dynamics, 2016, 83(4):1785-1801.
[12]FLORES P. Modeling and Simulation of Wear in Revolute Clearance Joints in Multibody Systems[J]. Mechanism & Machine Theory, 2009, 44(6):1211-1222.
[13]MACHADO M, COSTA J, SEABRA E, et al. The Effect of the Lubricated Revolute Joint Parameters and Hydrodynamic Force Models on the Dynamic Response of Planar Multibody Systems[J]. Nonlinear Dynamics, 2012, 69(1/2):635-654.
[14]FLORES P, AMBROSIO J, CLAROJ P. Dynamic Analysis for Planar Multibody Mechanical Systems with Lubricated Joints[J]. Multibody System Dynamics, 2004, 12(1):47-74.
[15]李波.空间润滑谐波减速器传动性能正交试验分析[J].机械工程学报,2012,48(3):82-87.LI Bo. Orthogonal Experiment Analysis on Transmission Performance of Space Lubricated Harmonic Drive[J]. Journal of Mechanical Engineering, 2012, 48(3):82-87.
[16]江静华, 蒋建清, 马爱斌,等. 固体润滑膜减摩效果与载荷对应关系的建模分析[J]. 中国表面工程, 2008, 21(2):44-49.JIANG Jinghua, JIANG Jianqing, MA Aibin, et al. Model Analysis for the Relationship of Nominal Load and the Reducing Friction Behavior of Soft Film on Hard Substrate[J]. China Surface Engineering, 2008, 21(2):44-49.
[17]HIROKATA S, KYOICHI U, MAKOTO M, et al. Micro-gravity Experiment of a Space Robotic Arm Using Parabolic Flight[J]. Advanced Robotics, 2004, 18(3):247-267.
[18]MATUNAGA S．Micro-gravity Experiments of Space Robotics and Space-used Mechanisms at Tokyo Institute of Technology[J]. Journal of the Japan Society of Microgravity Application, 2002, 19:105.
[19]FUSARO R L. Preventing Spacecraft Failures Due to Tribological Problems[R]. Cleveland：NASA Glenn Research Center, 2001.
[20]OBARA S, SATO M. Numerical Investigation of Influence of Gravity on the Performance of Ball Bearings Assembled in a Space Device[C]∥Proceedings of the 2nd World Tribology Congress. Vienna, 2001:1-4.
[21]HARRIST A， KORZALAS M N. 滚动轴承分析:轴承技术的基本概念[M]. 北京:机械工业出版社, 2010:233-236.HARRIS T A， KORZALAS M N. Essential Concepts of Bearing Technology:Rolling Bearing Analysis[M]. Beijing:Mechanical Industry Press, 2010:233-236.