[1]朱志宏, 李济泽, 彭晋民, 等. 微小型壁面检测爬壁机器人移动平台研究[J]. 机械工程学报, 2011, 47(3):49-54.
ZHU Zhihong, LI Jize, PENG Jinmin, et al. Mobile Platform of Miniature Wall-climbing Robot for Building Surface Inspection[J]. Journal of Mechanical Engineering, 2011, 47(3):49-54.
[2]BERNS K, HILLENBRAND C. A Climbing Robot Based on under Pressure Adhesion for the Inspection of Concrete Walls[C]∥The 35th International Symposium on Robotics. Paris, 2004:119.
[3]BRIDGE B, HILLENBRAND C, SCHMIDT D, et al. CROMSCI:Development of a Climbing Robot with Negative Pressure Adhesion for Inspections[J]. Industrial Robot, 2008, 35(3):228-237.
[4]刘淑霞, 王炎, 徐殿国, 等. 爬壁机器人技术的应用[J]. 机器人, 1999, 21(2):148-155.
LIU Shuxia, WANG Yan, XU Dianguo, et al. The Application of Wall-climbing Robot[J]. Robot, 1999, 21(2):148-155.
[5]吴善强. 低噪声负压吸附爬壁机器人系统的研究[D]. 哈尔滨:哈尔滨工业大学, 2007.
WU Shanqiang. Study on Low Noise Wall-climbing Robot Based on Negative Pressure Suction[D]. Harbin :Harbin Institute of Technology, 2007.
[6]YUE R, XIAO J, WANG S, et al. Modeling and Path Planning of the City-climber Robot Part I:Dynamic Modeling[C]∥IEEE International Conference on Robotics and Biomimetics. Guilin, 2009:2385-2390.
[7]LONGO D, MUSCATO G. The Alicia 3 Climbing Robot:a Three-module Robot for Automatic Wall Inspection[J]. Robotics & Automation Magazine, 2006, 13(1):42-50.
[8]SCHRAFT R D, SIMONS F, SCHFER D, et al. Concept of Low-cost Window-cleaning Robot[C]∥6th International Conference on Climbing and Walking Robots and Their Supporting Technologies. Catania, 2003:17-19.
[9]XIAO J, SADEGH A, ELLIOTT M, et al. Design of Mobile Robots with Wall Climbing Capability[C]∥IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Monterey, 2005:438-443.
[10]XIAO J, LI B, USHIRODA K, et al. Rise-Rover:A Wall-climbing Robot with High Reliability and Load-carrying Capacity[C]∥IEEE International Conference on Robotics and Biomimetics. Zhuhai, 2015:299-306.
[11]MAGGIO S J. Surface Traversing Apparatus and Method:US,7775312[P]. 2010-08-17.
[12]徐泽亮, 马培荪. 永磁吸附履带式爬壁机器人转向运动灵活性分析[J]. 上海交通大学学报, 2003, 37(增刊2):58-61.
XU Zeliang, MA Peisun. Analysis of Permanent Magnetic Tracked Wall-climbing Robot's Turning Agile Capability[J]. Journal of Shanghai Jiao Tong University, 2003, 37(S2):58-61.
[13]孙玲. 除锈爬壁机器人壁面行走控制技术研究[D]. 大连:大连海事大学, 2015.
SUN Ling. Research on Wall Travelling Control for Ship Rust Removal Wall Climbing Robot[D]. Dalian :Dalian Maritime University, 2015.
[14]孙玲, 弓永军, 王祖温, 等. 船舶除锈机器人转向运动学分析[J]. 机械设计与制造, 2014(7):189-191.
SUN Ling, GONG Yongjun, WANG Zuwen, et al. Steering Kinematics Analysis on Ship Rust Removal Robot[J]. Machinery Design & Manufacture, 2014(7):189-191.
[15]衣正尧, 弓永军, 王祖温, 等. 新型船舶壁面除锈爬壁机器人动力学建模与分析[J]. 机械工程学报, 2010, 46(15):23-30.
YI Zhengyao, GONG Yongjun, WANG Zuwen, et al. Dynamic Modeling and Analysis on a New Type Wall-climbing Robot for Ship Wall Rust Removal[J]. Journal of Mechanical Engineering, 2010, 46(15):23-30.
[16]汪志城. 滚动摩擦机理和滚动摩擦因数[J]. 上海理工大学学报, 1993(4):35-43.
WANG Zhicheng. A Mechanism of Rolling Friction and the Coefficient of Rolling Friction[J]. Journal of University of Shanghai for Science and Technology, 1993(4):35-43.
[17]郭建廷. 滚动摩擦力的产生机理及其计算[J]. 润滑与密封, 1988(1):21-26.
GUO Jianting. The Mechanism of Producing Rolling Friction Force and Its Calculation[J]. Lubrication and Sealing, 1988(1):21-26. |