精密球超精密加工技术的研究进展

摘要/Abstract

摘要： 掌握精密球超精密加工过程中的球面研磨轨迹分布特性以及各工艺参数对加工结果的影响，对提高精密球加工精度与效率十分重要。对精密球超精密加工技术的发展及研磨均匀性的评价进行回顾，并根据精密球超精密加工技术的发展脉络，阐述当前主要精密球超精密加工技术的加工原理及加工实例。从材料去除率、加工精度、批一致性等方面对几种精密球超精密加工技术进行比较，并以提高加工精度及加工效率为目标，对精密球超精密加工技术的发展趋势进行预测。

关键词: 精密球, 超精密加工, 研磨均匀性, 研磨轨迹, 批一致性

Abstract: For improving the precision and efficiency of precision ball machining, understanding of the distribution characteristics of the spherical machining trajectory and the influences of each process parameters on the machining results were essential prerequisites. Historical progresses of the ultra-precision machining technology of precision balls and evaluation of lapping uniformity were plotted, and based on the development of precision ball machining methods，the present advanced ultra-precision machining methods of precision balls were described with emphasis on the processing mechanism and examples. The different ultra-precision machining methods of precision balls were compared in terms of material removal rate, machining accuracy and batch consistency. And aiming to high machining accuracy and high efficiency, the probable further trends of ultra-precision machining technology of precision balls were forecasted．

Key words: precision ball, ultra-precision machining, lapping uniformity, lapping trajectory, batch consistency

中图分类号:

TH161

周芬芬1；袁巨龙2；姚蔚峰3；吕冰海2；阮德南4. 精密球超精密加工技术的研究进展[J]. 中国机械工程.

ZHOU Fenfen1；YUAN Julong2；YAO Weifeng3；LYU Binghai2；NGUYEN Duc-Nam4. Review on Ultra-precision Machining Technology of Precision Balls[J]. China Mechanical Engineering.

参考文献

[1]黄强先, 胡小娟, 卞亚魁,等. 微球球度测量技术的研究进展[J]. 中国机械工程, 2016, 27(9):1271-1277.
HUANG Qiangxian, HU Xiaojuan, BIAN Yakui, et al. Advances in Sphericity Measurement Technology of Micro Sphere[J]. China Mechanical Engineering, 2016, 27(9):1271-1277.
[2]向北平, 付康, 倪磊,等. 沟曲率半径系数对高速陶瓷球轴承润滑状态影响的研究[J]. 机械设计与制造, 2018(2):54-57.
XIANG Beiping, FU Kang, NI Lei, et al. Curvature Radius Coefficient of the Deep Research on the Effects of Groove Ceramic Ball Bearing Lubrication State[J]. Machinery Design & Manufacture, 2018(2):54-57.
[3]TADZIJEVAS A, BARZDAITIS V, BARZDAITISV V, et al. New Deep Groove Ball Bearings High Frequencies Vibration Testing[J]. Mechanika, 2014, 20(3):287-293.
[4]ZHUO Y, ZHOU X, YANG C. Dynamic Analysis of Double-row Self-aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls[J]. Journal of Sound & Vibration, 2014, 333(23):6170-6189.
[5]NOGUCHI S, HIRUMA K, KAWA H, et al. The Influence of Location of Balls and Ball Diameter Difference in Rolling Bearings on the Nonrepetitive Runout (NRRO) of Retainer Revolution[J]. Precision Engineering, 2005, 29(1):11-18.
[6]MRIO CSAR R. Ball's Motion, Sliding Friction, and Internal Load Distribution in a High-speed Ball Bearing Subjected to a Combined Radial, Thrust, and Moment Load, Applied to the Inner Ring's Center of Mass: Numerical Procedure[J]. Journal of Physics Conference Series, 2015, 641(1):1-9.
[7]O'BRIEN M J, PRESSER N, ROBINSON E Y. Failure Analysis of Three Si3N4 Balls Used in Hybrid Bearings[J]. Engineering Failure Analysis, 2003, 10(4):453-473.
[8]袁巨龙, 张飞虎, 戴一帆,等. 超精密加工领域科学技术发展研究[J]. 机械工程学报, 2010, 46(15):161-177.
YUAN Julong, ZHANG Feihu, DAI Yifan, et al. Development Research of Science and Technologies in Ultra-precision Machining Field[J]. Journal of Mechanical Engineering, 2010, 46(15):161-177.
[9]郭东明. 高性能精密制造[J]. 中国机械工程, 2018, 29(7):757-765.
GUO Dongming. High-performance Precision Manufacturing[J]. China Mechanical Engineering, 2018, 29(7):757-765.
[10]程相文, 林福严, 孙新民,等. 静电陀螺仪球形转子的研磨运动轨迹分析[J]. 制造技术与机床, 2009,30(9):90-93.
CHENG Xiangwen, LIN Fuyan, SUN Xinmin, et al. Lapping Motional Trajectory Analysis on Sphere Rotor of Electrostatic Gyroscope[J]. Manufacturing Technology & Machine Tool, 2009, 30(9):90-93.
[11]聂兰芳, 赵学军. 钢球加工成圆条件及其影响因素探讨[J]. 轴承, 2001(1):16-18.
NIE Lanfang, ZHAO Xuejun. Discussion on Sphere-shaping Condition and Influencing Factors of Steel Ball Processing[J]. Bearing, 2001(1):16-18.
[12]IDO M. Studies on the Method of the Manufacture of Miniature Ball Bearings[J]. J. Japan Soc. Precision Engng.，1957,23(4)：127-131.
[13]INAGAKI K, ABE K. Evaluation of Performance of Minute Sphere Grinders Prepared for Trial [R]. Tohoku：Report of Science and Measurement Research Institute，1976.
[14]ANGELE W. Finishing High Precision Quartz Balls[J]. Precision Engineering, 1980, 2(3):119-122.
[15]ZHANG B, UEMATSU T, NAKAJIMA A. High Efficiency and Precision Grinding of Si3N4 Ceramic Balls Aided by Magnetic Fluid Support Using Diamond Wheels.[J]. JSME International Journal, 1998, 41(3):499-505.
[16]CHANG F Y, CHILDS T H C. Non-magnetic Fluid Grinding[J]. Wear, 1998, 223(1/2):7-12.
[17]黑部利次. ヤラミックスの球超精密研磨[J]. 机械と工具, 1990, 34 (2): 43-49.
[18]王军, 郑焕文. 陶瓷球研磨加工的新方法[J]. 金刚石与磨料磨具工程, 1996(4):15-18.
WANG Jun, ZHENG Huanwen. A New Method for Lapping Ceramic Balls[J]. Diamond & Abrasives Engineering, 1996(4):15-18.
[19]ICHIKAWA S, ONA H, YOSHIMOTO I, et al. Proposal of New Lapping Method for Ceramic Balls[J]. CIRP Annals： Manufacturing Technology, 1993, 42(1):421-424.
[20]KANG J, HADFIELD M. A Novel Eccentric Lapping Machine for Finishing Advanced Ceramic Balls[J]. Proceedings of the Institution of Mechanical Engineers Part B： Journal of Engineering Manufacture, 2001, 215(6):781-795.
[21]冯凯萍, 吕冰海, 邓乾发,等. 氮化硅陶瓷球双平面抛光技术[J]. 轴承, 2013(3):11-15.
FENG Kaiping, LYU Binghai, DENG Qianfa, et al. Dual-plane Polishing Technology for Silicon Nitride Ceramic Balls[J]. Bearing, 2013(3):11-15.
[22]叶程, 吕冰海, 邓乾发,等. 陶瓷球毛坯摇摆式精整技术的研究[J]. 中国机械工程, 2014, 25(4):512-516.
YE Cheng, LYU Binghai, DENG Qianfa, et al. Research on Swing Type Sizing Technology for Ceramic Blank Balls[J]. China Mechanical Engineering, 2014, 25(4):512-516.
[23]YUAN J L, CHEN L N, ZHAO P, et al. Study on Sphere Shaping Mechanism of Ceramic Ball for Lapping Process[J]. Key Engineering Materials, 2004, 259/260:195-200.
[24]YUAN J L, WANG Z W, LYU B H, et al. Simulation Study on the Developed Eccentric V-grooves Lapping Mode for Precise Ball[J]. Aviation Precision Manufacturing Technology, 2005, 304/305:300-304.
[25]王志伟.精密球研磨技术的基础研究[D]. 杭州：浙江工业大学，2005.
WANG Zhiwei. Basic Research on Precision Ball Lapping[D]. Hangzhou: Zhejiang University of Technology, 2005.
[26]郭红燕. 新型精密轴承球超精密研磨加工系统仿真与设计优化[D]. 南京：南京航空航天大学, 2006.
GUO Hongyan. Simulation and Design Optimization of the New Ultra-precision Lapping System of Precise[D]. Nanjing：Nanjing University of Aeronautics and Astronautics, 2006.
[27]程相文, 王凌霄. 四轴球体研磨机研磨轨迹的研究[J]. 制造业自动化, 2013, 35(20):98-100.
CHENG Xiangwen, WANG Lingxiao. Research on Lapping Trace of Four Cup Lapping Machine[J]. Manufacturing Automation, 2013, 35(20):98-100.
[28]ZHOU Z Z, ZHENG J J, YUAN J L, et al. Simulation of a Ceramic Ball Lapping Process under Dual Rotating Plates Lapping Mode[J]. International Journal of Computer Applications in Technology, 2007, 29(2/4):247.
[29]周芬芬, 袁巨龙, 姚蔚峰,等. 陶瓷球成球过程的建模与仿真[J]. 华中科技大学学报(自然科学版), 2016，44(2):128-132.
ZHOU Fenfen, YUAN Julong, YAO Weifeng, et al. Modeling and Simulation on Sphere-shaping of Ceramic Balls[J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2016，44(2):128-132.
[30]吕程昶, 孙玉利, 王勇,等. 双转盘偏心槽球体研磨均匀性定量评价方法[J]. 南京航空航天大学学报, 2016, 48(6):864-869.
LYU Chengchang, SUN Yuli, WANG Yong, et al. Quantitative Evaluation Method of Ball Lapping Uniformity Using Eccentric Lapping Method with Two Rotatable Lapping Plates[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2016, 48(6):864-869.
[31]ZHANG B, NAKAJIMA A. Spherical Surface Generation Mechanism in the Grinding of Balls for Ultraprecision Ball Bearings[J]. Journal of Engineering Tribology, 2000, 214(4):351-357.
[32]马志谦, 张所昌. 钢球研磨板沟槽尺寸设计及压沟深度控制[J]. 轴承, 2002(5):21-22.
MA Zhiqian, ZHANG Suochang. Groove Dimension Design and Groove Depth Control of Steel Ball Grinding Plate[J]. Bearing, 2002(5):21-22.
[33]YUAN J L, LU B H, LIN X, et al. Research on Abrasives in the Chemical Mechanical Polishing Process for Silicon Nitride Balls[J]. Journal of Materials Processing Technology, 2002, 129(S1):171-175.
[34]张京军, 李国广, 高瑞贞,等. 基于无打滑现象钢球研磨的动力学分析[J]. 中南大学学报:自然科学版, 2015,46(7):2452-2458.
ZHANG Jingjun, LI Guoguang, GAO Ruizhen, et al. Dynamic Analysis of Grinding Balls Based on No Slipping[J]. Journal of Central South University (Science and Technology), 2015, 46(7):2452-2458.
[35]李国广, 高瑞贞, 张京军,等. 轴承钢球研磨力学建模及分析[J]. 机械设计与制造, 2014(2):236-238.
LI Guoguang, GAO Ruizhen, ZHANG Jingjun, et al. The Modeling and Analysis of Grinding Mechanics on Bearing Balls[J]. Machinery Design & Manufacture, 2014(2):236-238.
[36]陈章. 3M7680型钢球磨球机优化设计研究[D]. 苏州：苏州大学, 2011.
CHEN Zhang.3M7680 Type Steel Ball Grinding Machine Optimization Design Research[D]. Suzhou：Suzhou University, 2011.
[37]孔永刚, 于琦, 万磊. 氮化硅陶瓷球高效研磨加工工艺试验[J]. 轴承, 2016(2):20-21.
KONG Yonggang, YU Qi, WAN Lei. Efficient Grinding Process Test for Silicon Nitride Ceramic Balls[J]. Bearing, 2016(2):20-21.
[38]余龙芬, 袁巨龙, 周芬芬,等. 高精度球体加工机床加压系统的研究[J]. 制造技术与机床, 2016，37(2):31-36.
YU Longfen, YUAN Julong, ZHOU Fenfen, et al. Study on the Loading System of Precision Ball Processing Machine Tool[J]. Manufacturing Technology & Machine Tool, 2016，37(2):31-36.
[39]ZHANG B, UMEHARA N, KATO K. Effect of the Eccentricity between the Driving Shaft and the Guide Ring on the Behavior of Magnetic Fluid Grinding of Ceramic Balls[J]. Journal of the Japan Society for Precision Engineering, 1995, 61(4):586-590.
[40]LEE R T, HWANG Y C, CHIOU Y C. Lapping of Ultra-precision Ball Surfaces. Part Ⅱ. Eccentric V-groove Lapping System[J]. International Journal of Machine Tools & Manufacture, 2006, 46(10):1146-1156.
[41]KANG J, HADFIELD M. Parameter Optimization by Taguchi Methods for Finishing Advanced Ceramic Balls Using a Novel Eccentric Lapping Machine[J]. Journal of Engineering Manufacture, 2001, 215(1):69-78.
[42]HADFIELD M, KANG J. The Effects of Lapping Load in Finishing Advanced Ceramic Balls on a Novel Eccentric Lapping Machine[J]. Journal of Engineering Manufacture, 2005, 219(7):505-513.
[43]KANG J, HADFIELD M. The Polishing Process of Advanced Ceramic Balls Using a Novel Eccentric Lapping Machine[J].Journal of Engineering Manufacture, 2005, 219(7):493-504.
[44]王军, 张淳, 吴玉厚. 精密陶瓷球研磨加工技术研究[J]. 制造技术与机床, 1998，19(9):34-36.
WANG Jun, ZHANG Chun, WU Yuhou, et al. Study on a Lapping Method for Precision Ceramic Ball[J]. Manufacturing Technology & Machine Tool, 1998，19(9):34-36.
[45]章燕申, 雷田玉. 精密球形零件的工艺和计量[J]. 中国惯性技术学报, 1989(1):117-124.
ZHANG Yanshen, LEI Tianyu. Manufacture and Measurement of Precision Balls[J]. Journal of Chinese Inertial Technology, 1989(1): 117-124.
[46]孙新民, 李树文, 王永梁. 四轴球体研磨机实现球体均匀研磨的充分必要条件[J]. 光学精密工程, 1999, 7(1):70-74.
SUN Xinmin, LI Shuwen, WANG Yongliang. Full Conditions of the Uniform Lap for the Four Shafts Ball lapping Machine[J]. Optics & Precision Engineering, 1999, 7(1):70-74.
[47]孙新民, 王占林, 李树文,等. 四轴球体研磨机超精密研磨的机理及试验[J]. 河北联合大学学报(自然科学版), 2000, 8(1):46-50.
SUN Xinmin, WANG Zhanlin, LI Shuwen, et al. Mechanism and Experiment of Superprecision Ball Lapping for the Four Shafts Lapping Machine[J]. Optics & Precision Engineering, 2000, 8(1):46-50.
[48]余兴龙, 王友冰, 索忠堃. 四研头超精加工小球机理分析[J]. 清华大学学报(自然科学版), 2003, 43(5):632-635.
YU Xinglong, WANG Youbing, SUO Zhongkun. Mechanism Analysis for Super-precision Machining of Small Balls by a 4-cup Type Lapping Machine[J]. Journal of Tsinghua University, 2003, 43(5):632-635.
[49]程相文, 林福严, 孙新民. 四轴球体研磨机的研磨均匀性[J]. 光学精密工程, 2009, 17(12):3022-3027.
CHENG Xiangwen, LIN Fuyan, SUN Xinmin. Lapping Uniformity of Four-shaft-ball Lapping Machine[J]. Optics & Precision Engineering, 2009, 17(12):3022-3027.
[50]KUROBE T, KAKUTA H, ONODA M. Spin Angle Control Lapping of Balls (2nd Report): Lapping of Silicon Nitride Ball[J]. J. JSPE，1997, 63（5）： 726-730.
[51]朱晨. 同轴三盘研磨方式钢球研磨运动学方程及其解[J]. 湘潭大学自然科学学报, 1994，19(3):24-27.
ZHU Chen. Kinematics Equation of Motion of a Steel Ball Which is Being Lapped for the Lapping Mode Having Three Coaxial Plates and Its Solution[J]. Natural Science Journal of Xiangtan University, 1994，19(3):24-27.
[52]朱晨. 同轴二盘和三盘两种研磨方式的钢球研磨运动规律分析[J]. 湘潭大学自然科学学报, 1995，20(1):52-57.
ZHU Chen. Analyses of Laws of Motion of a Steel Ball Being Lapped for Two Lapping Modes Having Two and Three Coaxial Plates[J]. Natural Science Journal of Xiangtan University, 1995，20(1):52-57.
[53]KUROBE T, MORITA T, TSUCHIHASHI N. Super Fine Finishing of Si3N4 Ceramic Ball Using Spin Angle Controlled Machining Method[J]. Journal of the Japan Society for Precision Engineering Contributed Papers, 2004, 70(11):1392-1396.
[54]LIU D, DENG Q F, LYU B H, et al. Simulation and Analysis for Spin Angle Track of the Ball Machined by Dual Rotation Plates Lapping Method[J]. Applied Mechanics & Materials, 2010, 37/38:1148-1152.
[55]郁炜, 吕冰海, 姚蔚峰,等. 基于ADAMS的球体双自转研磨方式下研磨盘转速优化研究[J]. 中国机械工程, 2013, 24(7):866-872.
YU Wei, LYU Binghai, YAO Weifeng, et al. Speed Optimization for Lapping Plates in RDP Lapping Mode Based on ADAMS[J]. China Mechanical Engineering, 2013, 24(7) :866-872.
[56]LYU B H, YUAN J L, CHENG F, et al. Influence of Supporting Characteristics on Sphericity of Ceramic Balls in Rotated Dual-plates Lapping Process[J]. Advanced Materials Research, 2009, 69/70:69-73.
[57]郁炜, 吕冰海, 李兴林,等. 双自转研磨沟槽结构参数对球体研磨均匀性的影响分析[J]. 轴承, 2013(4):19-21.
YU Wei, LYU Binghai, LI Xinglin, et al. Analysis on Influence of Structural Parameters for Rotated Dual-plates Lapping Groove on Lapping Uniformity of Sphere[J]. Bearing, 2013(4):19-21.
[58]WANG Zhiwei, LYU Binghai, YUAN Julong, et al. On the Evaluation of Lapping Uniformity for Precision Balls[J]. Key Engineering Materials, 2009, 416:558-562.
[59]YUAN J L, TANG K F, WANG Z W, et al. Lapping of WC-Co Cemented Carbide Ball by Eccentric Dual-rotating V-groove Lapping Mode[J]. Advanced Materials Research, 2009, 69/70:287-290.
[60]LYU C C, SUN Y L, ZUO D W. A Novel Eccentric Lapping Method with Two Rotatable Lapping Plates for Finishing Cemented Carbide Balls[J]. International Journal of Mechanical and Mechatronics Engineering, 2015, 9(5):684-691.
[61]UMEHARA N, KATO K. Magnetic Fluid Grinding of Advanced Ceramic Balls[J]. Wear, 1996, 200(S 1/2):148-153.
[62]RAGHUNANDAN M, KOMANDURI R. Finishing of Silicon Nitride Balls for High-speed Bearing Applications[J]. Journal of Manufacturing Science & Engineering, 1998, 120(2):376-386.
[63]UMEHARA N, KIRTANE T, GERLICK R, et al. A New Apparatus for Finishing Large Size/Large Batch Silicon Nitride (Si3N4) Balls for Hybrid Bearing Applications by Magnetic Float Polishing (MFP)[J]. International Journal of Machine Tools & Manufacture, 2006, 46(2):151-169.
[64]JIANG M, KOMANDURI R. On the Finishing of Si3N4 Balls for Bearing Applications[J]. Wear, 1998, 215(S1/2):267-278.
[65]LEE R T, HWANG Y C, CHIOU Y C. Dynamic Analysis and Grinding Tracks in the Magnetic Fluid Grinding System : Part Ⅰ. Effects of Load and Speed[J]. Precision Engineering, 2009, 33(1):81-90.
[66]LEE R T, HWANG Y C, CHIOU Y C. Dynamic Analysis and Grinding Tracks in the Magnetic Fluid Grinding System: Part Ⅱ. The Imperfection and Ball Interaction Effects[J]. Precision Engineering, 2009, 33(1):91-98.
[67]CHILDST H C, MOSS D J. Grinding Ratio and Cost Issues in Magnetic and Non-magnetic Fluid Grinding[J]. Annals of the CIRP, 2000,49(1) :255-261.
[68]CHILDST H C, MOSS D J. Wear and Cost Issues in Magnetic Fluid Grinding[J]. Wear, 2001，249（5）：509-516.
[69]MA W, ZHANG B, NAKAJIMA A, et al. Electrolytic In-process Dressing Grinding of Ceramic Balls[J]. International Journal of Advanced Manufacturing Technology, 2015, 79:1-8.
[70]ZHAO P, GUO W, FENG M, et al. A Novel Lapping Method for High Precision Balls Based on Variable-radius V-groove[J]. Journal of Micro and Nano-Manufacturing, 2013, 1(4):041007.
[71]ZHOU F, YUAN J, LYU B, et al. Kinematics and Trajectory in Processing Precision Balls with Eccentric Plate and Variable-radius V-groove[J]. International Journal of Advanced Manufacturing Technology, 2015, 84(9/12):1-12.
[72]郑斌, 袁巨龙, 赵萍,等. 变曲率沟槽精密球研磨加工优化实验研究[J]. 表面技术, 2017(2):214-219.
ZHENG Bin, YUAN Julong, ZHAO Ping, et al. Experiment of Optimized Grinding of Precision Ball with Variable-radius Groove[J]. Surface Technology, 2017(2):214-219.
[73]JIANG L, YAO W, HE Y, et al. An Experimental Investigation of Double-side Processing of Cylindrical Rollers Using Chemical Mechanical Polishing Technique[J]. International Journal of Advanced Manufacturing Technology, 2016, 82(1/4):523-534.