[1]ZHANG H Y, LIU M. Development and Application of Carbon Fiber Composites[J]. Engineering Plastics Applications, 2015, 43(11): 132-135.
[2]LIU X, PIOTTER V. Mapping Micro-mechanical Properties of Carbon-filled Polymer Composites by TPM[J]. Precision Engineering, 2007, 31(2): 162-168.
[3]PRISCO U, D'ONOFRIO M C. Three-dimensional CFD Simulation of Two-phase Flow inside the Abrasive Water Jet Cutting Head[J]. International Journal for Computational Methods in Engineering Science and Mechanics, 2008, 9(5): 300-319.
[4]YANG L, SONG J, HU B. Neural Network Parametric Modelling of Abrasive Waterjet Cutting Quality[J]. International Journal of Abrasive Technology, 2007, 1(2): 198-207.
[5]HASHISH M. A Model for Abrasive-waterjet (AWJ) Machining[J]. Journal of Engineering Materials & Technology, 1989, 111(2): 154-162.
[6]PAUL S, HOOGSTRATE A M, LUTTERVELT C A V, et al. An Experimental Investigation of Rectangular Pocket Milling with Abrasive Water Jet[J]. Journal of Materials Processing Technology, 1998, 73(1/3): 179-188.
[7]AZMIR M A, AHSAN A K. Investigation on Glass/Epoxy Composite Surfaces Machined by Abrasive Water Jet Machining[J]. Journal of Materials Processing Technology, 2008, 198(1/3): 122-128.
[8]AZMIR M A, AHSAN A K, RAHMAH A. Effect of Abrasive Water Jet Machining Parameters on Aramid Fibre Reinforced Plastics Composite[J]. International Journal of Material Forming, 2009, 2(1): 37-44.
[9]UNDE P D, GAYAKWAD M D, PATIL N G, et al. Experimental Investigations into Abrasive Waterjet Machining of Carbon Fiber Reinforced Plastic[J]. Journal of Composites, 2015: 971596.
[10]THONGKAEW K, WANG J, YEOH G H. An Investigation of Hole Machining Process on a Carbon-fiber Reinforced Plastic Sheet by Abrasive Waterjet[J]. Advanced Materials Research, 2016, 1136: 113-118.
[11]KUMARAN S T, KO T J, KURNIAWAN R, et al. ANFIS Modeling of Surface Roughness in Abrasive Waterjet Machining of Carbon Fiber Reinforced Plastics[J]. Journal of Mechanical Science & Technology, 2017, 31(8): 3949-3954.
[12]杨清文, 廖振方, 杨林. 磨料射流加工的主要参数对冲蚀体积的影响[J]. 制造技术与机床, 1997(10):30-32.
YANG Qingwen, LIAO Zhenfang, YANG Lin. The Influence of the Main Parameters of Abrasive Jet on the Erosion Volume[J]. Manufacturing Technology and Machine Tools, 1997(10): 30-32.
[13]王建生, 李晓红, 杨林, 等. 磨料参数对准直磨料射流切割性能的影响[J]. 水动力学研究与进展, 2000, 15(1):89-93.
WANG Jiansheng, LI Xiaohong, YANG Lin, et al. Influence of Abrasive Parameters on Cutting Performance of Collimated Abrasive Jet[J]. Journal of Hydrodynamics, 2000, 15(1): 89-93.
[14]王伟. 高压磨料水射流切割碳纤维复合材料的试验研究[D]. 哈尔滨:哈尔滨理工大学, 2015.
WANG Wei. Study on the Experiment of Carbon Fiber Composite Materials with High-pressure AWJ Cutting[D]. Harbin: Harbin University of Science and Technology, 2015.
[15]HASHISH M. A Modeling Study of Metal Cutting with Abrasive Waterjets[J]. Journal of Engineering Materials & Technology Transactions of the ASME, 1984, 106(1): 88.
[16]HASHISH M. Visualization of the Abrasive-waterjet Cutting Process[J]. Experimental Mechanics, 1988, 28(2): 159-169. |