[1]ZHANG Ming, WANG Weiqiang, WANG Pengfei, et al. Fatigue Behavior and Mechanism of FV520B-I Welding Seams in a Very High Cycle Regime [J]. International Journal of Fatigue, 2016, 87: 22-37.
[2]ZHANG Ming, WANG Weiqiang, WANG Pengfei, et al. The Fatigue Behavior and Mechanism of FV520B-I with Large Surface Roughness in a Very High Cycle Regime [J]. Engineering Failure Analysis, 2016, 66: 432-444.
[3]QIN Ming, LI Jianfeng, CHEN Songying, et al. Experimental Study on Stress Corrosion Crack Propagation Rate of FV520B in Carbon Dioxide and Hydrogen Sulfide Solution [J]. Results in Physics, 2016, 6: 365-372.
[4]LIU Ziwu, LI Jianfeng, JIA Xiujie, et al. Establishment and Analysis of Erosion Depth Model for Impeller Material FV520B [J]. International Journal of Precision Engineering and Manufacturing-green Technology, 2016, 3 (1): 27-34.
[5]王光存, 李剑峰, 贾秀杰, 等. 离心压缩机叶轮材料FV520B冲蚀规律和机理的研究 [J]. 机械工程学报, 2014, 50(19): 182-190.
WANG Cunguang, LI Jianfeng, JIA Xiujie, et al. Study on Erosion Behavior and Mechanism of Impeller’s Material FV520B in Centrifugal Compressor[J]. Journal of Mechanical Engineering, 2014, 50(19): 182-190.
[6]WANG Jinlong, ZHANG Yuanliang, LIU Shujie, et al. Competitive Giga-fatigue Life Analysis Owing to Surface Defect and Internal Inclusion for FV520B-I [J]. International Journal of Fatigue, 2016, 87: 203-209.
[7]ZHANG Yuanliang, WANG Jinlong, SUN Qingchao, et al. Fatigue Life Prediction of FV520B with Internal Inclusions [J]. Materials & Design, 2015, 69: 241-246.
[8]沈健, 杨威振, 周丹, 等. 压缩机转子过盈配合温差拆解松动量模型研究 [J]. 河北科技大学学报, 2015, 36(5): 445-450.
SHEN Jian, YANG Weizhen, ZHOU Dan, et al. Loose Volume Model Research on the Interference Fit Compressor Rotor Using the Method of Temperature Difference [J]. Journal of Hebei University of Science and Technology, 2015, 36(5): 445-450.
[9]SHEN Jian, CHEN Dong, LIU Guangfu, et al. FEM Analysis of Stress on Shaft-sleeve Interference Fits [J]. Advanced Materials Research, 2013, 668: 495-499.
[10]LIU Weiwei, ZHANG Bin, LI Yanzeng, et al. An Environmentally Friendly Approach for Contaminants Removal Using Supercritical CO2 for Remanufacturing Industry [J]. Applied Surface Science, 2014, 292: 142-148.
[11]LIU Weiwei, LI Mingzheng, SHORT T, et al. Supercritical Carbon Dioxide Cleaning of Metal Parts for Remanufacturing Industry [J]. Journal of Cleaner Production, 2015, 93: 339-346.
[12]LI Mingzheng, LIU Weiwei, QING Xiaochuan, et al. Feasibility Study of a New Approach to Removal of Paint Coatings in Remanufacturing [J]. Journal of Materials Processing Technology, 2016, 234: 102-112.
[13]郎经纬, 杜晓东, 陈丰君, 等. 叶片表面硫化腐蚀层弧斑低温等离子体去除 [J]. 中国表面工程, 2016, 29 (3): 103-108.
LANG Jingwei, DU Xiaodong, CHEN Fengjun, et al. Removing of Sulfide Corrosion Layer on Blade Surface by Low-temperature Plasma [J]. China Surface Engineering, 2016, 29 (3): 103-108.
[14]TANG Q H, ZHOU D, WANG Y L, et al. Laser Cleaning of Sulfide Scale on Compressor Impeller Blade [J]. Applied Surface Science, 2015, 355: 334-340.
[15]YU Jing, ZHANG Hongchao, DENG Dewei, et al. Analysis of the Relationship of Crack Arrest Effects with Fusion Zone Size by Current Detour and Joule Heating [J]. International Journal of Advanced Manufacturing Technology, 2016, 87(5): 1465-1474.
[16]YU Tao, DENG Dewei, WANG Gang, et al. Crack Healing in SUS304 Stainless Steel by Electropulsing Treatment [J]. Journal of Cleaner Production, 2016, 113: 989-994.
[17]FANG J X, DONG S Y, WANG Y J, et al. The Effects of Solid-state Phase Transformation Upon Stress Evolution in Laser Metal Powder Deposition [J]. Materials & Design, 2015, 87: 807-814.
[18]董世运, 闫世兴, 徐滨士, 等. 铸铁件激光熔覆NiCuFeBSi合金组织及力学性能 [J]. 中国激光, 2012(12): 67-73.
DONG Shiyun, YAN Shixing, XU Binshi, et al. Microstructure and Mechanical Property of NiCuFeBSi Alloy with Laser Cladding on Substrate of Gray Cast Irons [J]. Chinese Journal of Lasers, 2012(12): 67-73.
[19]WANG Lei, WANG Wenzhong, WANG Zhanjiang, et al. Numerical Study of Contacts between a Flat-ended Punch and a Half-space Embedded with Inhomogeneities [J]. Science China(Physics,Mechanics & Astronomy), 2014, 57 (4): 684-697.
[20]ZHANG Yingtao, WANG Gang, NIE Zhenguo, et al. Experimental Study of High Temperature Hydrozing Annealing 1J50 Alloy's Magnetic Properties [J]. Journal of Manufacturing Science & Engineering, 2013, 135(6): 061024.
[21]NIE Zhenguo, WANG Gang, YU Jianchao, et al. Phase-based Constitutive Modeling and Experimental Study for Dynamic Mechanical Behavior of Martensitic Stainless Steel under High Strain Rate in a Thermal Cycle [J]. Mechanics of Materials, 2016, 101: 160-169.
[22]NIE Zhenguo, WANG Gang, LIN Yongliang, et al. Precision Measurement and Modeling of Quenching-Tempering Distortion in Low-alloy Steel Components with Internal Threads [J]. Journal of Materials Engineering & Performance, 2015, 24 (12): 4878-4889.
[23]WEI Shaopeng, WANG Gang, DENG Dewei, et al. Microstructure Characterization and Thermal Behavior Around Crack Tip under Electropulsing [J]. Applied Physics A, 2015, 121 (1): 69-76.
[24]CUI Xiufang, GUO Jin, YANG Yuyun, et al. The Formation of Neodymium Conversion Coating and the Influence of Post-treatment [J]. Applied Surface Science, 2012, 258 (7): 3249-3254.
[25]CUI X F, JIN G., YANG Y Y, et al. Study of Gadolinium Based Protective Coating for Magnesium Alloys [J]. Surface Engineering, 2013, 28 (10): 719-724.
[26]CUI X F, JIN G, LIU E B, et al. Corrosion Resistance of Organic Coating Pretreated by Phytic Acid [J]. Surface Engineering, 2012, 28 (9): 657-661.
[27]宋亚南, 徐滨士, 王海斗, 等. 金属材料超高周疲劳的试验方法及失效特征 [J]. 中国有色金属学报, 2015, 25 (12): 3245-3254.
SONG Ya'nan, XU Binshi, WANG Haidou, et al. Testing Method and Failure Characters of Very High Cycle Fatigue of Metal Materials[J], The Chinese Journal of Nonferrous Metals, 2015, 25 (12): 3245-3254.
[28]ZHANG Yubo, XU Binshi, WANG Haidou, et al. A New Method of Critical Failure Monitoring for the Heterogeneity Material Friction Welding Specimens Applying Multiple Physical Signals [J]. Rare Metal Materials & Engineering, 2016, 45 (5): 1132-1137.
[29]ZHANG Zhi Qiang, WANG Hai Dou, XU Bin Shi, et al. Influence of Loading Levels on RCF Life and Failure Mode of Ni-based Alloy and WC-Ni Ceramic Composite Coatings [J]. International Journal of Fatigue, 2015, 74: 30-37.
[30]舒林森, 曹华军, 许磊, 等. 离心压缩机再制造叶轮结构特征三维建模方法及应用 [J]. 机械工程学报, 2014, 50 (3): 184-190.
SHU Linsen, CAO Huajun, XU Lei, et al. 3D Characteristic Modeling Method and Application for Remanufactured Impeller of Centrifugal Compressor [J]. Journal of Mechanical Engineering, 2014, 50 (3): 184-190.
[31]ZHANG Yubo, XU Binshi, WANG Haidou, et al. An Experimental Analysis of Fatigue Behavior of a Welded Impeller Made by FV520B Stainless Steel in an Over-speed Preloading Process [J]. Engineering Failure Analysis, 2016, 59: 111-121.
[32]CUI Huawei, CUI Xiufang, WANG Haidou, et al. Effects of Service Condition on Rolling Contact Fatigue Failure Mechanism and Lifetime of Thermal Spray Coatings—a Review [J]. Chinese Journal of Mechanical Engineering, 2015, 28 (1): 132-139.
[33]KANG Jiajie, XU Binshi, WANG Haidou, et al. Investigation of a Novel Rolling Contact Fatigue/Wear Competitive Life Test Machine Faced to Surface Coating [J]. Tribology International, 2013, 66 (7): 249-258.
[34]LI Tao, ZHANG Hongchao, YUAN C, et al. PCA Based Method for Construction of Composite Sustainability Indicators [J]. International Journal of Life Cycle Assessment, 2012, 17 (5): 593-603.
[35]PENG Shitong, LI Tao, TANG Zijue, et al. Comparative Life Cycle Assessment of Remanufacturing Cleaning Technologies [J]. Journal of Cleaner Production, 2016, 137: 475-489.
[36]LIU Mingzhou, LIU Conghu, GE Maogen, et al. The Online Quality Control Method for Reassembly Based on State Space Model [J]. Journal of Cleaner Production, 2016, 137: 644-651.
[37]GE Maogen, LIU Conghu, LIU Mingzhou. The Online Quality Control Methods for the Assembling of Remanufactured Engines’ Cylinder Block and Cover under Uncertainty [J]. International Journal of Advanced Manufacturing Technology, 2014, 74 (1/4): 225-233.
[38]SHEN Weilei, PANG Kai, LIU Conghu, et al. The Quality Control Method for Remanufacturing Assembly Based on the Jacobian-torsor Model [J]. International Journal of Advanced Manufacturing Technology, 2015, 81 (1/4): 253-261.
[39]ZHU Qinghua, TIAN Yihui, JOSEPH S. Diffusion of Selected Green Supply Chain Management Practices: an Assessment of Chinese Enterprises [J]. Production Planning & Control, 2012, 23 (10/11): 837-850.
[40]SONG Shouxu, LIU Ming, KE Qingdi, et al. Proactive Remanufacturing Timing Determination Method Based on Residual Strength [J]. International Journal of Production Research, 2015, 53 (17): 5193-5206. |