风洞六自由度机构运动解耦性分析

摘要/Abstract

摘要： 为了提高高速风洞试验的可靠性，设计了一种适用于支撑外挂物模型的六自由度机构并提出一种尾支杆变换后姿态角的补偿方法。通过串联机器人正向运动学的指数积(POE)公式，推导出机构在模型质心与机构旋转中心重合和不重合两种情况下的运动学正解公式，并给出不重合情况下不解耦姿态角的补偿量。激光跟踪仪标定试验证明该补偿方法具有可行性，从而为实现机构的轨迹规划及实时控制提供了理论基础。

关键词: 风洞试验, 六自由度机构, 指数积, 运动解耦, 标定试验

Abstract: To improve reliability of high speed wind tunnel tests, a wind tunnel 6-DOF mechanisms were designed， and an attitude angle compensation method was put forward when support stings were transformed. In two cases of the model centroid and the mechanism rotation center with or without coincidence, the kinematics formula was proposed based on POE of the serial robots. And then without coincidence, the compensation rate of the model decoupling attitude angles was given.The laser tracker calibration experiments prove the feasibility of the compensation method and provide theoretical basis for trajectory planning and real time control.

Key words: wind tunnel test, 6-DOF mechanism, product of exponential(POE), decoupling motion, calibration experiment

中图分类号:

TP242.3

孙琦;谢志江;吴经纬;李晟;宋宁策. 风洞六自由度机构运动解耦性分析[J]. 中国机械工程.

SUN Qi;XIE Zhijiang;WU Jingwei;LI Sheng;SONG Ningce. Decoupling Motion Analysis of Wind Tunnel 6-DOF Mechanisms[J]. China Mechanical Engineering.

参考文献

[1]王发祥,徐明方,方建强.高速风洞试验[M].北京:国防工业出版社,2003：1-15.
WANG Faxiang,XU Mingfang,FANG Jianqiang. High-speed Wind Tunnel Experiment [M]. Beijing: National Defense Industry Press, 2003：1-15.
[2]黄叙辉,罗新福,于志松.FL-24风洞新型捕获轨迹系统设计与发展[J].空气动力学学报,2008,26(2):145-149.
HUANG Xuhui,LUO Xinfu, YU Zhisong.Design and Development of a New Trajectory System for FL-24 Wind Tunnel [J]. Journal of Aerodynamics, 2008, 26(2): 145-149.
[3]张旭,郑泽龙,齐勇.6自由度串联机器人D-H模型参数辨识及标定[J].机器人,2016,38(3):360-370.
ZHANG Xu, ZHENG Zelong, QI Yong. Parameter Identification and Calibration of D-H Model for 6 Degrees of Freedom Tandem Robot [J]. Robot, 2016, 38(3): 360-370.
[4]ANGELES J. Fundamentals of Robotic Mechanical Systems [M].New York:Spriger-Verlag, 2003:129-162.
[5]谢志江,李诚,刘楠,等.6自由度装校机器人逆解的确定[J],吉林大学学报,2012，42(6):1563-1568.
XIE Zhijiang, LI Cheng, LIU Nan, et al.Determination of Inverse Kinematics of a 6-DOF Installing Calibrating Robot[J].Journal of Jilin University : Natural Science,2012,42(6):1563-1568.
[6]刁燕,陈章平,姚林，等.一种新型混联手术机器人的运动学分析[J].四川大学学报(工程科学版),2010,42(4):214-218.
DIAO Yan, CHEN Zhangping, YAO Lin, et al. Kinematic Analysis of a New Hybrid Surgical Robot[J].Journal of Sichuan University( Engineering Science Edition), 2010, 42(4): 214-218.
[7]高文斌,王洪光,姜勇.一种基于指数积的串联机器人标定方法[J].机器人，2013,35(2):156-161.
GAO Wenbin,WANG Hongguang,JIANG Yong, et al. A Calibration Method for Serial Robots Based on POE Formula[J].Robot, 2013,35(2):156-161.
[8]VEITSCHEGGER W K, WU C H. Robot Accuracy Analysis Based on Kinematics[J].IEEE Journal of Robotics and Automation, 1986,2(3):171-179.
[9]ZHUANG H Q, ROTH Z S, HAMANO F.A Complete and Parametrically Continuous Kinematic Model for Robot Manipulators[J]. IEEE Transactions on Robotics and Automation, 1992,8(4):451-463.
[10]BROCKETT R. Robotic Manipulators and the Product of Exponentials Formula[C]//Proceedings of the MTNS-83 International Symposium. Beer Sheva: Springer, 1984:120-129.
[11]陈庆诚,朱世强,王宣银,等.基于旋量理论的串联机器人逆解子问题求解算法[J].浙江大学学报(工学版),2014,48(1):1-8.
CHEN Qingcheng,ZHU Shiqiang,WANG Xuanyin, et al. Inverse Kinematics Sub-problem Solution Algorithm for Serial Robot Based on Screw Theory[J]. Journal of Zhejiang University(Engineering Science), 2014, 48(1): 1-8.
[12]ROCHA C,TONETTO,DIAS A.A Comparison between the Denavit-Hartenberg and the Screw-based Methods Used in Kinematic of Robot Manipulators[J].Robotic and Computer-Integrated Manufacturing,2011,27(4): 723-728.
[13]程永伦,朱世强,刘松国.基于旋转矩阵子矩阵正交的6R机器人运动学逆解研究[J].机器人,2008,30(2):160-164.
CHENG Yonglun, ZHU Shiqiang, LIU Songguo. The Inverse Kinematics of 6R Robots Based on the Orthogonal Character of Rotation Sub-matrix[J]. Robot,2008, 30(2):160-164.
[14]何庆稀，游震洲，孔向东.一种基于位姿反馈的工业机器人定位补偿方法[J].中国机械工程，2016，27(7):872-876.
HE Qingxi,YOU Zhenzhou,KONG Xiangdong. Positioning Error Compensation Method of Industrial Robot Based on Closed-loop Feedback of Position and Orientation[J]. China Mechanical Engineering, 2016, 27(7): 872-876.
[15]周炜,廖文和,田威. 基于空间插值的工业机器人精度补偿方法理论与试验[J]. 机械工程学报,2013,49(3):42-48.
ZHOU Wei,LIAO Wenhe,TIAN Wei. Theory and Experiment of Industrial Robot Accuracy Compensation Method Based on Spatial Interpolation[J]. Journal of Mechanical Engineering, 2013,49 (3): 42-48.
[16]范明争,韩先国. 基于标定及补偿提高串联机器人定位精度方法[J]. 北京航空航天大学学报,2017,43(1):176-183.
FAN Mingzheng, HAN Xianguo. Precision Improvement Method for Serial Robot Localization Based on a New Calibration and Compensation Strategy[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(1): 176-183.