中国机械工程

• 机械基础工程 • 上一篇    下一篇

基于多特征融合和BP-AdaBoost算法的列车关键零件故障自动识别

孙国栋1;汤汉兵1;林凯1;张杨2;赵大兴1   

  1. 1.湖北工业大学机械工程学院,武汉,430068
    2.南京大学计算机科学与技术系,南京,210023
  • 出版日期:2017-11-10 发布日期:2017-11-07
  • 基金资助:
    国家自然科学基金资助项目(51775177,51205115)
    National Natural Science Foundation of China (No. 51775177,51205115)

Automatic Fault Recognition for Key Parts of Train Based on Multi-feature Fusion and BP-AdaBoost Algorithm

SUN Guodong1;TANG Hanbing1;LIN Kai1;ZHANG Yang2;ZHAO Daxing1   

  1. 1.School of Mechanical Engineering, Hubei University of Technology, Wuhan, 430068
    2.Department of Computer Science, Nanjing University, Nanjing, 210023
  • Online:2017-11-10 Published:2017-11-07
  • Supported by:
    National Natural Science Foundation of China (No. 51775177,51205115)

摘要: 针对列车集尘器和安全链锁紧螺栓的故障检测,提出了一种基于多特征融合和BP-AdaBoost的故障自动识别算法。首先提取故障区域与非故障区域的局部二进制模式(LBP)、方向梯度直方图(HOG)和Haar-like三类特征;其次利用主成分分析(PCA)定义不同特征对故障识别准确率的贡献值,并据此对这三种特征进行降维和融合;再次利用融合特征来训练BP-AdaBoost分类器;最后用训练好的分类器结合不同的识别算法,对集尘器和安全链锁紧螺栓的故障进行定位和识别。实验结果表明,该算法能较好地识别两种不同故障,故障识别率高,误检率和漏检率低,对于光照不均和遮挡情况有一定的鲁棒性。

关键词: 集尘器, 安全链锁紧螺栓, 特征融合, BP-AdaBoost算法

Abstract: An automatic fault recognition method was proposed for the fault detection of the fastening bolts and dust collectors based on multi-feature fusion and BP-AdaBoost algorithm. Firstly, the local binary pattern (LBP), histogram of oriented gradient (HOG) and Haar-like features of the faulty and non-faulty areas were extracted. Then, the principal component analysis (PCA) was used to define the contribution of different features to the fault recognition accuracy, the three features metioned above were fused, and the dimensionality reduction was conducted to the fusion feature. Then the BP-AdaBoost classifier was trained by the fusion features. Finally, the trained classifier and the recognition algorithm were used to detect the dust collector and fastening bolt faults. The experimental results show that the algorithm may adapt to the recognition of two different faults. High recognition accuracy rate, low false ratios and low omission ratios are obtained, and the algorithm is robust to light unevenness and occlusion.

Key words: dust collector, fastening bolt, feature fusion, BP-AdaBoost algorithm

中图分类号: