广义形态学闭开差值运算在滚动轴承弱故障诊断中的应用

摘要/Abstract

摘要： 采用局部极值步长法和峭度准则，实现了形态学运算结构元素的自适应选择。改良了基于广义形态学闭开差值运算的相关算法，改善了获取轴承弱故障特征的效果。仿真信号及实测故障振动信号的分析表明，所提出诊断方法的诊断效果优于传统的广义形态学分析方法，该诊断方法能够较准确地提取滚动轴承微弱故障特征。

关键词: 滚动轴承, 形态学, 局部极值, 峭度

Abstract: According to local extreme step and kurtosis criterion, an adaptive method was suggested to select structure elements of morphology operations herein. Fault diagnosis results of acquiring bearing weak fault was improved with the modified generalized morphological closed and open margin operation algorithm. The analyses of the simulated signals and the measured vibration signals show that the proposed method is superior to the traditional generalized morphological analysis in the diagnosis of weak faults of rolling bearings. The analysis method suggested herein may obtain rolling bearing weak fault features quickly and accurately.

Key words: rolling bearing, morphology, local extreme, kurtosis

中图分类号:

TH133.33

顾兴龙;王凯;李露露;赵宏伟;解瑞东. 广义形态学闭开差值运算在滚动轴承弱故障诊断中的应用[J]. 中国机械工程.

GU Xinglong;WANG Kai;LI Lulu;ZHAO Hongwei;XIE Ruidong. Applications of Generalized Morphological Closed and Open Margin Operation to Diagnose Weak Faults of Rolling Bearings[J]. China Mechanical Engineering.

参考文献

[1]胡爱军, 孙敬敬, 向玲. 振动信号处理中数学形态滤波器频率响应特性研究[J]. 机械工程学报, 2012, 48(1):98-103.
HU Aijun, SUN Jingjing, XIANG Ling. Analysis of Morphological Filter's Frequency Response Characteristics in Vibration Signal Processing[J]. Journal of Mechanical Engineering, 2012, 48(1): 98-103.
[2]郝如江, 卢文秀, 褚福磊. 形态滤波器用于滚动轴承故障信号的特征提取[J]. 中国机械工程, 2009, 20(2): 197-201.
HAO Rujiang, LU Wenxiu, CHU Fulei. Morphological Filters in Feature Extraction for Rolling Bearings Defect Signals[J]. China Mechanical Engineering, 2009, 20(2): 197-201.
[3]姜万录, 郑直, 朱勇,等. 基于形态差值滤波和差分熵的滚动轴承故障诊断[J]. 中国机械工程, 2015,26(1): 63-70.
JIANG Wanlu, ZHENG Zhi, ZHU Yong, et al. Fault Diagnosis of Rolling Bearings Based on Morphological Difference Filter and Difference Entropy[J]. China Mechanical Engineering, 2015,26(1): 63-70.
[4]杜必强, 唐贵基, 石俊杰. 旋转机械振动信号形态滤波器的设计与分析[J]. 振动与冲击, 2009, 28(9): 79-81.
DU Biqiang, TANG Guiji, SHI Junjie. Design and Analysis of Vibration Signal Morphological Filter for Rotating Machinery[J]. Journal of Vibration and Shock, 2009, 28(9): 79-81.
[5]张文斌, 周晓军, 林勇. 广义形态滤波器在振动信号处理中的应用研究[J]. 农业工程学报, 2008, 24(6): 203-205.
ZHANG Wenbin, ZHOU Xiaojun, LIN Yong. Application of Generalized Morphological Filter in Vibration Signal Processing[J]. Transactions of the Chinese Society of Agricultural , 2008, 24(6): 203-205.
[6]沈路, 周晓军, 张文斌,等. 广义数学形态滤波器的旋转机械振动信号降噪[J]. 振动与冲击, 2009, 28(9): 70-73.
SHEN Lu, ZHOU Xiaojun, ZHANG Wenbin, et al. De-noising for Vibration Signals of a Rotating Machinery Based on Generalized Mathematical Morphological Filter[J]. Journal of Vibration and Shock, 2009, 28(9): 70-73.
[7]崔宝珍, 马泽玮, 李会龙,等. 基于广义形态学滤波和Hilbert边际谱的滚动轴承故障诊断[J]. 中国机械工程, 2016, 27(11):1484-1488.
CUI Baozhen, MA Zewei, LI Huilong, et al. Fault Diagnosis of Rolling Bearings Based on Generalized Morphological Filter and Hilbert Marginal Spectrum[J]. China Mechanical Engineering, 2016, 27(11):1484-1488.
[8]JIVET I, TOMOROGA M. Ultrasound Image Enhancement for Visualization Using Spatially Variant Morphological Filters[J]. IFMBE Proceedings, 2014, 44: 255-258.
[9]马泽玮. 广义形态滤波在滚动轴承降噪中的应用[J]. 运城学院学报, 2014, 32(2):58-61.
MA Zewei. Application of Generalized Morphological Filter in Noise Reduction of Rolling Bearing[J]. Journal of Yuncheng University, 2014, 32(2):58-61.
[10]苏文胜, 王奉涛, 张志新,等. EMD降噪和谱峭度法在滚动轴承早期故障诊断中的应用[J]. 振动与冲击, 2010, 29(3):18-21.
SU Wensheng, WANG Fengtao, ZHANG Zhixin, et al. EMD Denoising and Spectral Kurtosis in the Application of Fault Diagnosis of Rolling Bearing[J]. Journal of Vibration and Shock, 2010, 29(3):18-21.

[1]	胡超, 刘佐民. 基于材料匹配性的球轴承Heathcote黏-滑模型研究 [J]. J4, 201016, 21(16): 1969-1973.
[2]	郑近德, 王兴龙, 潘海洋, 童靳于, 刘庆运. 基于自适应自相关谱峭度图的滚动轴承故障诊断方法[J]. 中国机械工程, 2021, 32(07): 778-785，792.
[3]	丁嘉鑫;王振亚;姚立纲;蔡永武. 广义复合多尺度加权排列熵与参数优化支持向量机的滚动轴承故障诊断[J]. 中国机械工程, 2021, 32(02): 147-155.
[4]	杨路航1;李宝庆1;王平2,3;王健2,3;杨宇1. 基于概率输出弹性凸包的滚动轴承故障诊断方法[J]. 中国机械工程, 2021, 32(01): 40-46.
[5]	万书亭;彭勃;王晓龙. 基于双时域变换和稀疏编码收缩的滚动轴承早期故障诊断方法[J]. 中国机械工程, 2020, 31(23): 2829-2836.
[6]	孟宗;刘子涵;吕蒙. 基于改进奇异值分解滤波和谱峭度的滚动轴承故障诊断[J]. 中国机械工程, 2020, 31(20): 2420-2428.
[7]	王振亚;姚立纲. 广义精细复合多尺度样本熵与流形学习相结合的滚动轴承故障诊断方法[J]. 中国机械工程, 2020, 31(20): 2463-2471.
[8]	王霄1,2;谢平1;郭源耕1;武鑫1;江国乾1;何群1. 基于多字典-共振稀疏分解的脉冲故障特征提取[J]. 中国机械工程, 2019, 30(20): 2456-2462,2472.
[9]	李从志;郑近德;潘海洋;刘庆运. 基于精细复合多尺度散布熵与支持向量机的滚动轴承故障诊断方法[J]. 中国机械工程, 2019, 30(14): 1713-1719,1726.
[10]	段晨东;张荣. 基于改进经验小波变换的机车轴承故障诊断[J]. 中国机械工程, 2019, 30(06): 631-637.
[11]	张文颢1;李永健2,3;张卫华1. 基于K-奇异值分解和层次化分块正交匹配算法的滚动轴承故障诊断[J]. 中国机械工程, 2019, 30(04): 406-412.
[12]	李继猛1;李铭1;王慧1;张金凤2;张云刚1. 基于相关正交匹配追踪算法的风电机组滚动轴承稀疏故障诊断方法[J]. 中国机械工程, 2018, 29(12): 1428-1433.
[13]	李心一1;谢志江1;罗久飞2. 加窗插值快速傅里叶变换在滚动轴承故障诊断中的应用[J]. 中国机械工程, 2018, 29(10): 1166-1172.
[14]	马洪斌;佟庆彬;张亚男. 优化参数的变分模态分解在滚动轴承故障诊断中的应用[J]. 中国机械工程, 2018, 29(04): 390-397.
[15]	陈向民;张亢;晋风华;李录平. 基于时变零相位滤波的变转速滚动轴承故障诊断[J]. 中国机械工程, 2018, 29(02): 177-185.