双端面磨削砂轮直线修整中最佳修整参数的研究

中国机械工程

双端面磨削砂轮直线修整中最佳修整参数的研究

周志雄1;谢沈1;舒阳1;许世雄2;彭关清2;唐湘平2

1.湖南大学机械与运载工程学院，长沙，410082
2.宇环数控机床股份有限公司，长沙，410323

出版日期:2017-03-25 发布日期:2017-03-23
基金资助:
湖南省战略性新兴产业科技攻关项目(2014GK1021)

Research on Optimal Dressing Parameters for Wheel Linear Dressing of Double Disc Grinding

ZHOU Zhixiong1;XIE Shen1;SHU Yang1;XU Shixiong2;PENG Guanqing2;TANG Xiangping2

1.College of Mechanical and Vehicle Engineering,Hunan University,Changsha,410082
2.Yuhuan CNC Machine Tool Co.,Ltd.,Changsha,410323

Online:2017-03-25 Published:2017-03-23

摘要/Abstract

摘要： 根据双端面磨削原理,分析并确定砂轮直线修整相关的设计参数。以磨削区域内上下砂轮端面形状为研究对象，建立磨削区域的几何方程并进行分析计算，得到上下砂轮端面高度在工件几何中心运动轨迹上的变化曲线。分别确定固定式修整及插补式修整的最佳修整参数，获得磨削区域中理想的砂轮端面几何形状，提高工件的加工精度和精度稳定性,降低工件表面粗糙度。

关键词: 双端面磨削, 磨削区域, 修整参数, 几何形状

Abstract: The relevant design parameters of the wheel linear trim was analyzed and determined according to the principles of double disc grinding. Regarding the grinding wheel end surface topography as the research projects, some grinding zone geometry equations were established, calculated and analyzed to get the height curve of upper and lower wheel end surface on the workpiece geometric center trajectory. And then in order to obtain the ideal grinding wheel end surface geometric shape in the grinding zone, optimal dressing parameters of fixed trim and interpolation trim were determined respectively. These may improve the workpiece machining accuracy, accuracy consistency and reduce surface roughness.

Key words: double disc grinding, grinding zone, dressing parameter, geometric shape

中图分类号:

TG580.64

周志雄, 谢沈, 舒阳, 许世雄, 彭关清, 唐湘平. 双端面磨削砂轮直线修整中最佳修整参数的研究[J]. 中国机械工程.

ZHOU Zhixiong, XIE Shen, SHU Yang, XU Shixiong, PENG Guanqing, TANG Xiangping. Research on Optimal Dressing Parameters for Wheel Linear Dressing of Double Disc Grinding[J]. China Mechanical Engineering.

参考文献

[1]王洪，许世雄，申彬彬，等．双端面磨床的研究[J]．内燃机与配件，2011(3)：19-23．
WANG Hong, XU Shixiong, SHEN Binbin, et al. Study on Double Face Grinder [J]. Internal Combustion Engine and Accessories, 2011 (3):19-23.
[2]HU Huiqing. Grinding of Double Disc Grinding Machine [J]. Chinese Journal of Mechanical Engineering, 2005,18(1):1-4.
[3]张曙伟．双端面磨床提高加工精度的分析与研究[J]．精密制造与自动化，2002(4)：9-11．
ZHANG Shuwei. Analysis and Research on the Improvement of Machining Accuracy of Double Face Grinder [J]. Precision Manufacturing and Automation, 2002 (4):9-11.
[4]王洪，戴瑜兴，许君，等．数控双端面磨床送料圆盘转速预测算法的研究[J]．中国机械工程，2013,24(10)：1315-1319．
WANG Hong, DAI Yuxing, XU Jun, et al. Study on the Prediction Algorithm of Feed Disc Speed of NC Double Face Grinder [J]. China Mechanical Engineering, 2013,24(10):1315-1319.
[5]田业冰，金洙吉，康仁科，等．硅片自旋转磨削的运动几何学分析[J].中国机械工程，2005，16(20)：1798-1801.
TIAN Yebing, JIN Zhuji, KANG Renke, et al. Analysis of Motion Geometry of Silicon Wafer Self Rotating Grinding[J]. China Mechanical Engineering, 2005, 16(20):1798-1801.
[6]彭金波，周志雄，许世雄，等．双端面磨削砂轮作业面形貌模型研究[J]．现代制造工程，2016(2)：78-83．
PENG Jinbo, ZHOU Zhixiong, XU Shixiong, et al. Study on the Surface Topography Model of Double End Grinding Wheel [J]. Modern Manufacturing Engineering, 2016 (2):78-83.
[7]PIETSCH G J, KERSTAN M. Understanding Simultaneous Double-disk Grinding: Operation Principle and Material Removal Kinematics in Silicon Wafer Planarization[J]. Precision Engineering, 2005, 29(2): 189-196.
[8]ZARUDI I, HAN B S. Deformation and Material Removal Rate in Polishing Silicon Wafers [J]. Journal of Materials Processing Technology, 2003, 140(1): 641-645.
[9]季萍，张岩，殷滨杰．双端面磨床加工滚子端面的磨削区特性分析[J]．哈尔滨轴承，2007，28(3)：10-12．
JI Ping, ZHANG Yan, YIN Binjie. The Grinding Characteristics of Double Roller Grinder End Face Processing Analysis[J]. Harbin Bearing, 2007, 28 (3):10-12.
[10]HIRAOKA N, TAKAHASHI T. Grinding Disc-to-disc Distance Distribution Calculation in a Double-disc Grinder[J]. JSAT, 2014, 58: 463-467.
[11]张飞跃．双端面磨床无间隙直线修整器优越性及其应用[J]．精密制造与自动化，2002(4)：20-21．
ZHANG Feiyue. The Superiority and Application of Double End Face Grinder Straight Line Trimmer[J]. Precision Manufacturing and Automation, 2002 (4):20-21.