分体夹装式冷滚打主轴设计及可靠性分析

摘要/Abstract

摘要： 针对冷滚打成形中主轴受高频冲击的特点,对现有冷滚打主轴结构进行改进,给出了一种分体夹装式冷滚打主轴结构,并建立了相应的有限元分析模型。通过数值模拟的方法得到了该结构的模态和受力情况,验证了该结构的可行性。在此基础上,设计了用于C630车床的冷滚打实验用主轴,采用LMS系统得到了该主轴的前三阶模态,并通过和数值模拟方法所得结果进行对比,验证了有限元分析方法和结果的有效性。在C630车床上用该主轴结构对紫铜和20钢块料进行了冷滚打成形实验,进一步证明了分体夹装式冷滚打主轴结构的可行性。

关键词: 冷滚打, 主轴, 结构分析, LMS系统

Abstract: As for the characteristics of spindle impacted with the high frequency on cold roll-beating forming, a separate structure of cold roll-beating equipment's spindle was given by improving the existing spindle structure of cold roll-beating equipment, and the corresponding finite element model was established. The feasibility of this structure was proved with the modal and stress distribution of this structure which were obtained by the method of numerical simulation. Then the spindle used in the C630 lathe for cold roll-beating forming was designed, and the first three modes of this spindle were obtained using LMS system, then comparing the above results with the results of numerical simulation, the validity of the finite element analysis method and results was confirmed. The experiments shaping the copper and 20 steel by the technology of cold roll-beating were carried out on the C630 lathe with the above spindle structure shaping and further prove the feasibility of this separate structure of cold roll-beating equipment's spindle.

Key words: cold roll-beating, spindle, structural design, LMS system

中图分类号:

TG66

李龙, 李言, 姚远, 杨明顺, 袁启龙, 董皓. 分体夹装式冷滚打主轴设计及可靠性分析[J]. 中国机械工程.

Li Long, Li Yan, Yao Yuan, Yang Mingshun, Yuan Qilong, Dong Hao. Design and Reliability Analysis of Cold Roll-beating Equipment's Spindle Adopted Separate Structure[J]. China Mechanical Engineering.

参考文献

[1]Wang Zhongren.Theory and Approach to the Less-loading Closed Die Forging[J].Journal of Mechanical Engineering，2013，49(18)：92-98.

[2]郭东明，孙玉文，贾振元.高性能精密制造方法及其研究进展[J].机械工程学报，2014，50(11)：119-134.

Guo Dongming，Sun Yuwen，Jia Zhenyuan.Methods and Research Progess of High Performance Manufactuing[J].Journal of Mechanical Engineering，2014，50(11)：119-134.

[3]张璐，李言，杨明顺，等.增量成形研究进展[J].宇航材料工艺，2011，41(6)：32-38.

Zhang Lu，Li Yan，Yang Mingshun，et al.Recent Development of Incremental Forming[J].Aerospace Materials & Technology，2011，41(6)：32-38.

[4]崔凤奎，朱文娟，王晓强，等.高速冷滚打成形技术研究现状与发展趋势[J].河南理工大学学报(自然科学版)，2012，31(2)：191-200.

Cui Fengkui，Zhu Wenjuan，Wang Xiaoqiang，et al.Current Research and Development Trends of High-speed Cold Rolling Technology[J].Journal of Henan Polytechnic University，2012，31(2)：191-200.

[5]Ernst G，Krapfenbauer H.Roller Head for Cold Rolling of Splined Shafts or Gears：US，3818735[P].1973-06-25.

[6]KraPfenbauer H. New Methods to Cold Roll Splines on Hollow Blanks[J].European Production Engineering，1994，1(9)：39-43.

[7]Deriaz D，Geser P.Device and Method for Producing Tooth-like Profiled Sections on Workpieces：US，7562549[P].2009-07-21.

[8]Geser P.Method and Device for Making at Least Partly Profiled Tubes：US，20070271986[P].2007-11-29.

[9]李言，杨明顺，李玢，等.丝杠冷滚打成形动力学仿真及分析[J].西安理工大学学报，2009，25(4)：383-387.

Li Yan，Yang Mingshun，Li Bin，et al.Dynamics Simulation and Analysis of Lead Screw Cold Roll-Beating[J].Journal of Xian University of Technology，2009，25(4)：383-387.

[10]牛婷，李永堂，刘志奇，等.花键冷敲机执行机构运动参数分析与运动学仿真[J].机械设计，2014，31(4)：41-45.

Niu Ting，Li Yongtang，Liu Zhiqi，et al.Motion Parameters Analysis and Kinematics Simulation of Actuator of Spline Cold Rolling Device[J].Journal of Machine Design，2014，31(4)：41-45.

[11]牛婷，李永堂，刘志奇，等.花键冷敲机传动系统设计与分析[J].太原科技大学学报，2015，36(3)：175-179.

Niu Ting，Li Yongtang，Liu Zhiqi，et al.Analysis and Design of Transmission Dystem of Spline Cold Striking Machine[J].Journal of Taiyuan University of Science and Technology，2015，36(3)：175-179.

[12]苏金波，雷步芳，刘志奇，等.数控花键冷敲机滚打轮最小轴径的优化设计及验证[J].锻压装备与制造技术，2014，49(5)：90-93.

Su Jinbo，Lei Bufang，Liu Zhiqi，et al.Optimized Design and Verification of Smallest Axle Diameter of Rolling Wheel in CNC Spline Cold Rolling Process[J].China Metalforming Equipment & Manufacturing Technology，2014，49(5)：90-93.

[13]马群，李言，杨明顺，等.连续分度冷滚打机床滚打头结构改进[J].兵工学报，2015，36(8)：1587-1593.

Ma Qun，Li Yan，Yang Mingshun，et al.Structure Improvement of Roll-beating Head for Continuous Indexing Cold Roll-beating Machine[J].Acta Armamentarii，2015，36(8)：1587-1593.

[14]廖伯瑜，周新民，尹志宏，等.现代机械动力学及其工程应用[M].北京：机械工业出版社，2004.

[15]崔凤奎.高速精密冷滚打成形技术研究[D].西安：西安理工大学，2007.

[16]张璐，杨明顺，李言，等.高速冷滚打过程变形力解析方法及其修正[J].塑性工程学报，2011，18(5)：1-7.

Zhang Lu，Yang Mingshun，Li Yan，et al.Analytic Method and Its Modification for Deformation Force of High-speed Cold Roll-beating Forming[J].Journal of Plasticity Engineering，2011，18(5)：1-7.

[17]袁启龙，李言，杨明顺，等.块体材料冷滚打成形变形力研究[J].中国机械工程，2014，25(2)：251-256.

Yuan Qilong，Li Yan，Yang Mingshun，et al.Research on Deforming Force of Slab Cold Roll-beating[J].China Mechanical Engineering，2014，25(2)：251-256.

[18]崔中，文桂林，陈桂平，等.高速磨床整机动态特性研究[J].中国机械工程，2010，21(7)：782-787.

Cui Zhong，Wen Guilin，Chen Guiping，et al.Whole Machine Dynamic Characteristic Analysis of High Speed Grinder[J].China Mechanical Engineering，2010，21(7)：782-787.