[设计与优化]基于协同优化算法的高速受电弓多学科设计优化

doi:10.3969/j.issn.1004-132X.2021.04.015

摘要/Abstract

摘要： 考虑不同学科间的相互影响及耦合作用对受电弓设计优化的影响，分析了高速受电弓不同性能的设计要求，采用多学科设计优化思想建立了受电弓多学科设计的系统级优化模型及运动学、静力学、动力学和控制学的子系统优化模型；根据不同学科设计参数的耦合关系，采用协同优化方法，获取高速受电弓整体设计优化结果；建立受电弓的三维模型，采用有限元软件ANSYS验证了受电弓优化结果的有效性。结果表明：受电弓多学科协同设计优化不仅满足系统级和各个学科的设计要求，还获得高速受电弓系统的整体最优解或满意解，提高了受电弓的工作性能，降低了弓网接触力的波动，改善了弓网受流质量。

关键词: 高速受电弓, 多学科设计优化, 接触力, 主动控制, 结构分析

Abstract: Considering the influences of interaction and coupling among various disciplines on the design optimization of pantographs, the design demands of different working properties were analyzed. The multidisciplinary design optimization was adopted to establish optimization models of the system and subsystems that include the kinematics, statics, dynamics and control. According to the coupling relationship of design parameters of different disciplines, the collaborative optimization method was adopted to obtain the overall design optimization results of high-speed pantograph. The three-dimensional model of the pantograph was established to verify the validity of the optimized results by ANSYS. The results show that the multidisciplinary collaborative design meets the design requirements of the system and subsystems, and obtain the overall optimal solutions of the pantograph, which enhances the performance of the pantograph, reduces the fluctuation of the contact forces and increases the current collection quality of the pantograph and catenary.

Key words: high-speed pantograph, multidisciplinary design optimization, contact force, active control, structural analysis

中图分类号:

U264.34

张静, 程肥肥, 宋宝林, 刘志刚, 张卫华. [设计与优化]基于协同优化算法的高速受电弓多学科设计优化[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2021.04.015.

ZHANG Jing, CHENG Feifei, SONG Baolin, LIU Zhigang, ZHANG Weihua.

Multidisciplinary Design Optimization of High-speed Pantograph Based on Collaborative Optimization Algorithm

[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2021.04.015.

参考文献

［1］吴积钦. 受电弓与接触网系统［M］. 成都：西南交通大学出版社，2010.

WU Jiqin. Pantograph and Contact Line System［M］. Chengdu: Southwest Jiaotong University Press, 2010.

［2］刘红娇，张卫华，梅桂明. 高速受电弓几何机构参数优化［J］. 铁道学报，2001，23(6)：16-20.

LIU Hongjiao, ZHANG Weihua, MEI Guiming. Optimization of Geometric Parameters for High-speed Pantograph Mechanism［J］. Journal of the China railway Society, 2001, 23(6): 16-20.

［3］JIA F, XU F, ZHOU H, et al. Optimization and Simulation of the Operational Motion of a Pantograph: Uplift and Retraction［J］. Journal of Mechanical Science and Technology, 2017, 31(1): 41-52.

［4］张义民，高越，吕昊，等. DSA200受电弓可靠性及可靠性灵敏度分析［J］. 铁道工程学报，2016，33(9)：99-103.

ZHANG Yimin, GAO Yue, LYU Hao, et al. Analysis of Reliability and Reliability Sensitivity of DSA200 Pantograph［J］. Journal of Railway Engineering Society, 2016, 33(9):99-103.

［5］王江文，梅桂明，李瑞平，等. 弓网相互作用时受电弓关键部件动载荷研究［J］. 铁道学报，2018，40(3)：68-75.

WANG Jiangwen, MEI Guiming, LI Ruiping, et al. Dynamic Load Research of Key Components of Pantograph in Pantograph-catenary Interaction［J］. Journal of the China Railway Society, 2018,40(3): 68-75.

［6］LEE J, PARK T, OH H, et al. Analysis of Dynamic Interaction between Catenary and Pantograph with Experimental Verification and Performance Evaluation in New High-speed Line［J］. Vehicle System Dynamics, 2015, 53(8): 1117-1134.

［7］周宁，蔚超，邹欢，等.一种新的考虑接触角的弓网接触模型［J］. 振动与冲击，2019，38(2)：265-270.

ZHOU Ning, YU Chao, ZOU Huan, et al. New Pantograph/Catenary Contact Model Considering the Influence of Contact Angle［J］. Journal of Vibration and Shock, 2019, 38(2): 265-270.

［8］KIM J W, Yu S N. Design Variable Optimization for Pantograph System of High-speed Train Using Robust Design Technique［J］. International Journal of Precision Engineering and Manufacturing, 2013, 14(2):267-273.

［9］姜静，刘志刚，宋洋. 考虑受电弓非线性的弓网动态特性仿真研究［J］. 计算机仿真，2015，32(2)：170-174.

JIANG Jing, LIU Zhigang, SONG Yang. Simulation Study on Dynamic Behavior of Pantograph-catenary Considering the Nonlinear Characteristics of Pantograph［J］. Computer Simulation, 2015, 32(2): 170-174.

［10］SANCHEZREBOLLO C, JIMENEZOCTAVIO J R, CARNICERO A, et al. Active Control Strategy on a Catenary-pantograph Validated Model［J］. Vehicle System Dynamics, 2013, 51(4): 554-569.

［11］SONG Y, OUYANG H, LIU Z, et al. Active Control of Contact Force for High-speed Railway Pantograph-catenary Based on Multi-body Pantograph Model［J］. Mechanism and Machine Theory, 2017, 115(1): 35-59.

［12］PAPPALARDO C M, DE SIMONE M C , GUIDA D . Multibody Modeling and Nonlinear Control of the Pantograph/Catenary System［J］. Archive of Applied Mechanics, 2019, 89(8): 1589-1626.

［13］ZHANG J, LIU Z, SONG Y, et al. Study on Multidisciplinary Integrated Design of High-speed Pantograph Based on Parameters Design, Dynamics Analysis and Optimal Control［C］］//35th Chinese Control Conference. Chengdu, 2016: 10253-10257.

［14］罗钜，郭福水. 民用涡扇发动机总体多学科设计优化研究［J］. 中国机械工程，2019，30(15)：1813-1820.

LUO Ju, GUO Fushui. Study on Multi-disciplinary Design Optimization on Civil Turbofan Engines［J］. China Mechanical Engineering, 2019，30(15): 1813-1820.

［15］KROO I, MANNING V. Collaborative Optimization: Status and Directions［C］］//8th Symposium on Multidisciplinary Analysis and Optimization. AIAA, 2000: 2000-4721.

［16］WANG W, LIANG Y, ZHANG W, et al. Effect of the Nonlinear Displacement-dependent Characteristics of a Hydraulic Damper on High-speed Rail Pantograph Dynamics［J］. Nonlinear Dynamics, 2019, 95(4): 3439-3464.

［17］PISANO A, USAI E. Contact Force Estimation and Regulation in Active Pantographs: an Algebraic Observability Approach［C］//46th IEEE Conference on Decision and Control. New Orleans: IEEE, 2007: 4341-4346.

[1]	宿月文;郭彩霞. 摆线传动接触载荷与效率的关联模式及试验验证[J]. 中国机械工程, 2021, 32(05): 556-564.
[2]	严宏志1,2,3；王志标1,3；朱楚2,3,4；蔡孟凯2,3；黎佳2,3；胡璇2,3. 楔块重心位置对斜撑离合器性能的影响[J]. 中国机械工程, 2021, 32(03): 253-260.
[3]	易永胜1,2;李伟1;高亮1;肖蜜1;邱浩波1. 一种基于协同近似的多学科设计优化方法[J]. 中国机械工程, 2021, 32(01): 12-17.
[4]	罗钜;郭福水. 民用涡扇发动机总体多学科设计优化研究[J]. 中国机械工程, 2019, 30(15): 1813-1820.
[5]	朱坚民;李尧;何丹丹;田丰庆;李孝茹. 一种新的铣刀刀齿等效直径确定方法[J]. 中国机械工程, 2018, 29(05): 558-564.
[6]	侯雨雷;井国宁;邓云蛟;杨彦东;曾达幸. 含转动副间隙的两转动并联机构动力学建模与动态特性分析[J]. 中国机械工程, 2018, 29(02): 158-165.
[7]	朱坚民, 何丹丹, 田丰庆, 赵全龙. 一种新的预测铣刀刀尖频响函数的方法[J]. 中国机械工程, 2016, 27(20): 2765-2773.
[8]	李龙, 李言, 姚远, 杨明顺, 袁启龙, 董皓. 分体夹装式冷滚打主轴设计及可靠性分析[J]. 中国机械工程, 2016, 27(18): 2532-2539.
[9]	胡利鸿, 莫继良, 王东伟, 阳江舟, 陈光雄, 朱旻昊. 沟槽和圆坑织构抑制摩擦尖叫噪声研究[J]. 中国机械工程, 2016, 27(09): 1158-1164.
[10]	丁晓明, 吕俊成, 王伟. 基于典型工况的汽车后桥壳结构轻量化优化设计[J]. 中国机械工程, 2016, 27(08): 1047-1052.
[11]	李秦峰, 任成祖, 张斌, 李德成, 陈晓峰. 基于砂轮径向振动主动控制的ELID内圆磨削[J]. 中国机械工程, 2015, 26(9): 1179-1183.
[12]	谢兆夫, 赵亮, 郭孔辉, 张强. 重型车辆的差动制动防侧翻控制[J]. 中国机械工程, 2015, 26(24): 3402-3407.
[13]	李孝茹, 朱坚民, 张统超, 王健. 基于RCSA的深孔内圆磨床主轴端点频响函数预测[J]. 中国机械工程, 2015, 26(19): 2652-2661.
[14]	胡俊峰1;张宪民2. 基于μ综合的压电柔性结构振动主动控制[J]. 中国机械工程, 2014, 25(2): 147-151,156.
[15]	张伟中1, 张斌2, 伍晓红3, 孙清3. 时滞对振动主动控制系统控制效果的影响分析[J]. 中国机械工程, 2013, 24(3): 317-321.