点焊机器人轨迹能耗模型及其优化算法研究

摘要/Abstract

摘要：

提出一种点焊机器人最优能耗轨迹优化方法，将机器人关节空间中的关键点用五次多项式曲线连接，并基于机器人动力学建立了永磁交流伺服电机驱动的点焊机器人轨迹能耗模型。在考虑运动学、动力学及生产周期约束的情况下，采用蜜蜂进化型遗传算法求解了点焊机器人最优能耗轨迹。为保证算法全局寻优和收敛速度，构建了一种非线性适应度函数。仿真结果表明，与之前算法相比，求解效率更高，且最优能耗轨迹较最短时间轨迹能耗明显减少。

关键词: 点焊机器人, 能耗, 轨迹规划, 蜜蜂进化型遗传算法

Abstract:

An approach for optimal trajectory planning of spot welding robot manipulators was presented. By linking two points in joint space with quintic polynomial curves, energy consumption mathematical model of spot welding robot trajectory driven by permanent magnet synchronous motor(PMSM) was established based on industrial robots dynamics. The method for searching for the optimal spot welding robot trajectory based on BEGA was put forward by taking consideration of the constraints of robot kinematics, dynamics and the production cycle. In order to ensure the early global optimization and late stage convergence speed of the algorithm，the nonlinear algebraic fitness function was proposed. By contrast with the shortest time trajectory optimization, the results indicate that energy consumption of the energy optimal trajectory is reduced significantly and it also can obtain better solution in comparison with other methods.

Key words: spot welding robot, energy consumption, trajectory planning, bee evolutionary genetic algorithm(BEGA)

中图分类号:

TP242

邓乾旺, 罗正平, 张丽科, 崔巍. 点焊机器人轨迹能耗模型及其优化算法研究[J]. 中国机械工程, 2016, 27(01): 14-20.

Deng Qianwang, Luo Zhengping, Zhang Like, Cui Wei. Study on Energy Consumption Model and Its Optimization Algorithm for Spot Welding Robot Trajectory[J]. China Mechanical Engineering, 2016, 27(01): 14-20.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2016/V27/I01/14

参考文献

[1]Choi Y K，Park J H，Kim H S，et al. Optimal Trajectory Planning and Sliding Mode Control for Robots Using Evolution Strategy[J]. Robotica，2000，18(8)：423-428.
[2]Gasparetto A，Zanotto V. A Technique for Time-jerk Optimal Planning of Robot Trajectories[J]. Robotics and Computer-Integrated Manufacturing，2008，24(6)：415-426.
[3]曹波，曹其新，童上高，等. 基于时间最优的搬运机器人运动规划[J]. 组合机床与自动化加工技术，2012，7(7)：33-38.
Cao Bo，Cao Qixin，Tong Shanggao，et al. The Motion Planning of Handling Robot Based on Time Optimal[J]. Modular Machine Tool & Automatic Manufacturing Technique，2012，7(7)：33-38.
[4]李东洁，邱江艳，尤波. 一种机器人轨迹规划的优化算法[J]. 电机与控制学报，2009，13(1)：123-127.
Li Dongjie，Qiu Jiangyan，You Bo. Optimal Algorithm for Trajectory Planning of the Robot[J]. Electric Machines and Control，2009，13(1)：123-127.
[5]Koray A K，Iravani P，Necip S M. Optimum Tajectory Planning for Industrial Robots through Inverse Dynamics[C]//International Conference on Informatics in Control，Automation and Robotics. Funchal, Madeira - Portugal，2011：105-110.
[6]Lee S，Park J，Haw C. Optimal Control of A Mackerel-mimicking Robot for Energy Efficient Trajectory Tracking[J]. Journal of Bionic Engineering，2007，4(4)：209-215.
[7]Saramgo P，Ceccarelli M. Effect of Basic Numerical Parameters on a Path Planning of Robots Taking into Account Actuating Energy[J]. Mechanism and Machine Theory，2004，39(3)：247-260.
[8]Mohanmmed A，Schmidt B，Wang L，et al. Minimizing Energy Consumption for Robot Arm Movement[J]. Procedia CIRP，2014，25：400-405.
[9]徐海黎，解祥荣，庄健，等. 工业机器人的最优时间与最优能量轨迹规划[J]. 机械工程学报，2010，46(9)：19-25.
Xu Haini，Xie Xiangrong，Zhuang Jian，et al. Global Time-energy Optimal Planning of Industrial Robot Trajectories[J]. Journal of Mechanical Engineering，2010，46(9)：19-25.
[10]牛宗宾. 工业机器人交流伺服驱动系统设计[D].哈尔滨：哈尔滨工业大学，2013.
[11]Pellicciari M，Berselli G，Leali F，et al. A Method for Reducing the Energy Consumption of Pick-and-place Industrial Robots[J]. Mechatronics，2013，23：326-334.
[12]季晨. 工业机器人姿态规划及轨迹优化研究[D].哈尔滨：哈尔滨工业大学，2013.
[13]米利国. 工业机器人轨迹寻优算法研究与实现[D]. 呼和浩特：内蒙古大学，2014.
[14]Leonnard W. Microcomputer Control of High Dynamic Performance AC Drives - A Survey[J]. Automatica，1986，22(1)：1-19.
[15]孟伟，韩学东. 蜜蜂进化型遗传算法[J]. 电子学报，2006，34(7)：1294-1300.
Meng Wei，Han Xuedong. Bee Evolutionary Genetic Algorithm[J]. Acta Electronica Sinica，2006，34(7)：1294-1300.